General Description

•   Liquid soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.

•   Available in four finishes (white, black, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.

•   Suitable for high traffic facilities and for public use.

•   Dispenses liquid soaps or hydro-alcoholic gel. Surgical soaps and soaps with solid abrasive particles are not supported.

  Components & materials

  •   DJP0034: Stainless steel AISI 304, white epoxy finish.

  •   DJP0034C: Stainless steel AISI 304, bright finish.

  •   DJP0034CS: Stainless steel AISI 304, satin finish.

  •   DJP0034B: Stainless steel AISI 304, black epoxy finish.

  •   Level display in the front part that constantly indicates the level of soap available inside the soap dispenser.

  •   Inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes.

  •   Lever made in stainless steel.

  •   Anti-drip corrosion resistant valve that dispenses 1.5 ml of soap per service. This anti-drip valve, which dispenses liquid soap, is easily interchangeable with the valves of the other soap dispensers of the same line.

  •   Hinged cover for operator convenience and speed of service.

  •   Opening on top with provided Mediclinics key that allows soap refill.

  •   It is mounted on the wall by means of four Ø4 stainless steel screws (provided) with their corresponding Ø 6mm plastic plugs (also provided).

  •   It is recommended to use liquid soaps or disinfectant gel soaps (maximum of alcohol content of 85 %) with a density between 0.9 and 1.35 kg/dm3 and a maximum viscosity of 3,000 cps.

7010

Reframe | Soap shelf and shower wiper

Soap shelf and shower wiper Brushed steel
Unique soap shelf with hidden magnets in the wall fitting to give the wiper a permanent, functional and practical home.

The soap shelf is made of a strengthened steel plate with a groove to drain the water off it. Around the edge is a thin laser-cut ‘anti-slip’ barrier, to help stop shampoo and other bathroom products sliding off the shelf when it is wet.

The wiper has just two parts – a high-quality silicone element and a strengthened steel frame. This design distributes the pressure quite evenly across the whole surface and ensures that it is cleaned effectively and consistently. The wiper has silicone bumpers on the ends, to protect tiles and other surfaces from scratches. The silicone element is very hard- wearing and lasts a long time.

The pack contains fittings, screws and an Unbraco key for assembly.