Otsingu tulemused
Projektide hinnapäringud palume saata e-mailiga: info@pegu.ee
Klientide nõustamine 9.00-19.00, tel.+372 515 0681
Your bathroom deserves the best
Damixa's comprehensive range of shower systems and shower sets gives you the freedom of choice without compromise. Looking for a complete system with overhead shower and hand shower? Or maybe a more simple solution with just a hand shower? Whatever your need, there is a Damixa solution for your bathroom.
Beautiful Danish design and world class quality always included.
62,00 €
Your bathroom deserves the best
Damixa's comprehensive range of shower systems and shower sets gives you the freedom of choice without compromise. Looking for a complete system with overhead shower and hand shower? Or maybe a more simple solution with just a hand shower? Whatever your need, there is a Damixa solution for your bathroom.
Beautiful Danish design and world class quality always included.
118,00 €
MATERIALS:
Waste Receptacle — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. All-welded construction. 1/2" (13mm) recessed bottom equipped with four 1-1/2" (40mm) diameter x 3/4" (19mm) high, heavy-duty rubber feet.
Funnel Top — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. One-piece construction. 8-1/4" (210mm) diameter opening.
Waste Container — Galvanized steel with wire handle. Removable for servicing. Capacity: 33-gal. (125-L).OPERATION:
Funnel top lifts off for removal and servicing of waste container. Wide opening provides hygienic, no-touch waste disposal. Heavy-duty rubber feet protect flooring and elevate receptacle slightly off the floor.
Designer's Note: This unit is not suitable for outside use.SPECIFICATION:
Floor-standing waste receptacle shall be type-304, 16-gauge (1.6mm) stainless steel with satin finish. One-piece funnel top shall have 8-1/4" (210mm) diameter opening. Bottom of receptacle shall be recessed 1/2" (13mm) and equipped with four heavy- duty rubber feet that elevate receptacle slightly off floor. Removable, rigid plastic liner shall have a wire handle and a minimum capacity of 33-gal. (125-L).
Komplektis on 1500mm voolik, dushipea (3 funktsioone), seebialus, lift
97,00 €
Komplektis on adaptorid 19mm, 20,6mm, 25mm
Ref: 88822 - Shower panel with timed flow PRESTO 50 tapware, with hand-held shower
> Working pressure :
1 to 5 bar
> Flow :
6 l/min with integrated flow limiter Anti-water-hammering device
Hand-held shower on rail with chrome plated slide
> Flow time :
30 seconds (± 5 sec.)
> Hydraulic supply :
G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 On P 50 tap NF II with cold water or pre-mixed water
> Material :
Anodised aluminium extruded section (2.5mm thickness) Aluminum removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers
> Functioning:
Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Non turnable push button Non-removable, wear-proof red marker
> Delivered with :
1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in concordance with ISO 9227
> Working pressure :
1 to 5 bar
> Flow :
10 l/min with integrated flow limiter
Hand-held shower on rail with chrome plated slide
> Hydraulic supply :
G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to use the adaptation kit under the reference 91026. On single control mixer tap with ceramic disks
> Material :
Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers
> Functioning:
Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Adjustable tamper-proof temperature limiter to prevent scalding
> Delivered with :
1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure :
1 to 5 bar
> Flow :
6 l/min with integrated flow limiter Anti-water-hammering design
Hand-held shower on rail with chrome plated slide
> Flow time :
30 seconds (± 5 sec.)
> Hydraulic supply :
G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026. On ALPA S® NF IB mixer tap with NF check valves
> Material :
Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers
> Functioning:
Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Adjustable tamper-proof temperature limiter to prevent scalding
Patented anti-blocking "S" system preventing the water flows continuously
> Delivered with :
1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screw and instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure : 1 to 5 bar
> Flow : 6 l/min with integrated flow limiter Anti-water-hammering design Hand-held shower on rail with chrome plated slide > Flow time : 30 seconds (± 5 sec.)
> Hydraulic supply : G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026. On ALPA NF IB mixer tap with NF check valves
> Material : Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers
> Functioning: Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance : Resistant to a temperature of 75°C for 30-minute-thermal-shocks > Security : Adjustable tamper-proof temperature limiter to prevent scalding
> Delivered with : 1/2" hoses with revolving nuts MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screw and instruction manual
> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure : 1 to 5 bar
> Flow : 6 l/min with integrated flow limiter Anti-water-hammering device Hand-held shower on rail with chrome plated slide
> Flow time : 30 seconds (± 5 sec.)
> Hydraulic supply : G 1/2"(15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026. On P 50 tap NF II and thermostatic mixer tap EN 1111 (NF check valves)
> Material : Anodised aluminum profile (2.5mm thickness) Aluminum removable valve plate, peinted RAL 7005 High resistance RAL 7005 coloured ABS casings
> Functioning: Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance : Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security : Anti-scald system: flow is immediately stopped if the cold water is cut off Maximum delivered temperature : pre-fixed at 38°
> Delivered with : 1/2" hoses with revolving nuts MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screw and instruction manual > Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure :
1 to 5 bar
> Flow :
Maximum flow pre-fixed at 8 l/min with flow limiter. Hand-held shower on rail with chrome plated slide
> Hydraulic supply :
G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 On 1/2 turn tap with ceramic cartridges and flow limiter.
On EN 1111 thermostatic mixer tap with NF check valves
> Material :
Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers
> Functioning:
Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance :
Resistant to a temperature of 70°C during 30 minutes (for 20 cycles) in case of thermal shocks.
> Security :
Water network security : no cross-connection between hot water and cold water (unique Mastermix technology) Anti-scalding safety : flow is immediately stopped if the cold water or hot water is cut off, compliant to French norm EN1111. Temperature switch limiter will not deliver pre-mixed water above 38°C.
> Delivered with :
1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure :
1 to 5 bar
> Flow rate:
6l/min with integrated flow limiter Anti-water-hammering device
Hand-held shower on rail with chrome plated slide
> Flow time:
30 seconds (adjustable from 1 sec to 5 min) and Start/Stop function Adjustable duration and frequency of the "duty flush" function
> Hydraulic supply :
G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 On the PRESTO TOUCH® tapware and EN 1111 thermostatic mixer tap with NF check valves
> Power supply:
6 V Lithium battery type CRP2 in a case integrated inside the panel
> Material :
Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers
> Functioning:
Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance :
Resistant to a temperature of 70°C during 30 minutes (for 20 cycles) in case of thermal shocks
> Security :
WATER NETWORK SECURITY : no cross-connection between hot water and cold water (only in Mastermix technology). Two solenoid valves allow to isolate the hot water and cold water.
ANTI-SCALDING SAFETY : flow is immediately stopped if the cold water or hot water is cut off, compliant to French norm EN1111. Integrated temperature switch limiter will not deliver pre-mixed water above 38°C.
Possibility to parameter the periodical flushing in term of frequency or flow time
The solenoid valve closes automatically if the battery runs out or the sensor is damaged
> Delivered with :
1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
PRODUCT DESCRIPTION• For the fitting of a DAN DRYER hair dryer. • Stepless height adjustment within a 50 cm range. • Sturdy glide fitted with strong gas springs. • Mirror for glide front available as an extra feature. • Excl. hair dryer, which must be ordered separately. • 2-year warranty.
|
NAPPY CHANGER WP 2115
540 x 946 x 135 mm
vertical version
- Nappy changer in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed, handle strip with glossy surface.
Further available surfaces: see below. - Easy to open and close with maintenance free lifting mechanism supported by gas struts.
- Table surface in grey polypropylene, molded, without any visible fixtures.
- TÜV-tested and certified according to
DIN EN 1221-1: 2013
DIN EN 1221-2: 2013
AfPS GS 2014: 01 PAK
Load capacity 15 kg, test load 150 kg;
approved for public and private use. - Wear parts can be replaced as modules.
- Mounting: With four screws through fixing holes in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 26,7
2164,00 €
|
Mora Cera dušikomplekt
|
Dušikomplekt sisaldab:
Mora Cera termostaatsegistit MA nr. 241150.DB
- Surve- ja temperatuuriühtlustus
- Temperatuuriseade hoob, piirajaga 38 °C ja 42 °C juures
- Eco-stop süsteem 6 l/min 3-baarise surve juures
- Standarditele vastavad tagasilöögiklapid, Euroopa standard EN1717
- Eriti kasutajasõbralikud käepidemed, heakskiidetud Rootsi Reumaliidu poolt
Mora Cera dušisüsteemi S5 MA nr. 130005
- Keraamilise sisuga ümberlüliti
- Metallist dušivoolik, PVC- ja BPA-vaba
- Easy-Clean katlakivivastane süsteem
- Dušilifti toru on vajadusel võimalik lühendada
- Ümberlüliti paigaldamisel on võimalik valida käepideme suunda
- Õhustamine võimaldab mugavat voolukiirust 6 l/min, maksimaalset voolukiirust 10 l/min
687,00 €
Mudel 702617 160mm tsentride vahe "rootsi standart"
Mudel 702618 150mm tsentride vahe "eesti standart"
Dušikomplekt sisaldab:
termostaatsegistit:
- Surveühtlustusega termostaatsegisti
- Temperatuuriseade hoob, piirajaga 38 °C juures
- Eco-stop süsteem
- Standarditele vastavad tagasilöögiklapid, Euroopa standard EN1717
dušisüsteemi:
- Keraamilise sisuga ümberlüliti
- Metallist dušivoolik, PVC- ja BPA-vaba
- Easy-Clean katlakivivastane süsteem
- Dušilifti toru on vajadusel võimalik lühendada
- Käsidušš 9 l/min, dušipea 20 l/min
1509,00 €
|
Mora MMIX dušikomplekt
|
Dušikomplekt sisaldab:
Mora MMIX termostaatsegistit MA nr. 731150.0011DB
- Surveühtlustusega termostaatsegisti
- Temperatuuriseade hoob, piirajaga 38 °C juures
- Eco-stop süsteem 9 l/min 3-baarise surve juures
- Pliivaba
- Standarditele vastavad tagasilöögiklapid, Euroopa standard EN1717
Mora MMIX dušisüsteemi S5 MA nr. 130313
- Keraamilise sisuga ümberlüliti
- Metallist dušivoolik, PVC- ja BPA-vaba
- Easy-Clean katlakivivastane süsteem
- Dušilifti toru on vajadusel võimalik lühendada
- Ümberlüliti paigaldamisel on võimalik valida käepideme suunda
- ECO funktsioon (energiat ja vett säästev käsidušš 9 l/min, dušipea 12 l/min)
635,00 €
|
Mora MMIX dušikomplekt
|
Dušikomplekt sisaldab:
Mora MMIX termostaatsegistit MA nr. 730100.0011DB
- Surveühtlustusega termostaatsegisti
- Temperatuuriseade hoob, piirajaga 38 °C juures
- Eco-stop süsteem 9 l/min 3-baarise surve juures
- Pliivaba
- Standarditele vastavad tagasilöögiklapid, Euroopa standard EN1717
Mora MMIX dušisüsteemi S5 MA nr. 130313
- Keraamilise sisuga ümberlüliti
- Metallist dušivoolik, PVC- ja BPA-vaba
- Easy-Clean katlakivivastane süsteem
- Dušilifti toru on vajadusel võimalik lühendada
- Ümberlüliti paigaldamisel on võimalik valida käepideme suunda
- ECO funktsioon (energiat ja vett säästev käsidušš 9 l/min, dušipea 12 l/min)
Mora dušilifti kandurit koos voolikuga MA nr. 130367
876,00 €
|
Mora One dušikomplekt jooksutoruga
|
Dušikomplekt sisaldab:
Mora One termostaatsegistit:
- Surveühtlustusega termostaatsegisti
- Temperatuuriseade hoob, piirajaga 38 °C juures
- Eco-stop süsteem
- Standarditele vastavad tagasilöögiklapid, Euroopa standard EN1717
Mora One dušisüsteemi:
- Keraamilise sisuga ümberlüliti
- Metallist dušivoolik, PVC- ja BPA-vaba
- Easy-Clean katlakivivastane süsteem
- Dušilifti toru on vajadusel võimalik lühendada
- Käsidušš 9 l/min, dušipea 20 l/min
2040,00 €
|
Mora One dušikomplekt
|
Dušikomplekt sisaldab:
Mora One termostaatsegistit:
- Surveühtlustusega termostaatsegisti
- Temperatuuriseade hoob, piirajaga 38 °C juures
- Eco-stop süsteem
- Standarditele vastavad tagasilöögiklapid, Euroopa standard EN1717
Mora One dušisüsteemi:
- Keraamilise sisuga ümberlüliti
- Metallist dušivoolik, PVC- ja BPA-vaba
- Easy-Clean katlakivivastane süsteem
- Dušilifti toru on vajadusel võimalik lühendada
- Käsidušš 9 l/min, dušipea 20 l/min
1699,00 €
.jpg)
