Категории
jpg_180130_1.jpg Zoom

Delabie настенная хозяйственная раковина для гипса Н/Р сталь AISI304

Артикул: DE-180130
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена:
2232,00 €
Kuumakse alates: 189,72 €
Кол-во: - +
   - или -   

Wall-mounted plaster sink 
Ref. 180130

Wall-mounted plaster sink. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.5mm. 
Smooth surface and flat edges for easy cleaning. 
Suitable for hospitals, healthcare establishments and leisure centres. 
Supplied with removable plaster basket with lid to filter plaster debris. 
Can be installed in 2 ways: bowl on the right or bowl on the left. 
Waste outlet 1 ½".
Supplied with fixing elements.Weight: 17kg. 

 

TECHNICAL FEATURES 

Wall-mounted plaster sink 
Ref. 180130

Height 390mm
Length 600mm
Width 1000mm
Thickness 1.5mm
Finish 304 polished satin stainless steel

Файлы

Схожие продукты

Питьевой фонтан Portinox FP-002 крепление к стене, до пола Н/Р сталь

Артикул: FP-002 ,   Время доставки: 7 недель
869,00 €

Антивандальный унитаз INVA Н/Р сталь

AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.

 

The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.

 

It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.

Basic technical information
Water inlet: d= 34 - 50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 27 kg
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
  • Stainless-steel backrest
Артикул: AZP-AUZ 08 INV ,   Время доставки: 3-4 недели
2629,00 €

Нержавеющая подвесная раковина 455x330 , Н/Р сталь

Stainless steel floor standing bulk sink, 700x700x850 mm

 

Characteristics

  • stainless steel bulk sink with supporting legs with a sheating
  • without a tap hole (could be made to order)
  • possibility of fine plane regulation by the regulation screws on the supporting legs
  • available also in dimensions 600 x 600 x 850 mm
  • material CrNi 18/10 (AISI-304)
  • brushed finish
  • different dimensions could be made to order
Order number 93150
Code SLUN 15
Артикул: SA-SLVN 01 ,   Время доставки: 3-5 недель
635,00 €

HEMI inset round washbasin Ø 310mm - Ref. 120471

Round basin for recessed installation from above or below.

Basin internal diameter: 310mm.

Cut-out diameter: 330mm for installation from above, 310mm for installation from below.

Bacteriostatic 304 stainless steel.

304 stainless steel, bright polished

Stainless steel thickness: 1mm. One-piece, seam-free pressed bowl.

Rounded edges prevent injury. Supplied with 1¼" waste. Without overflow.

CE marked.

Complies with European standard EN 14688. Weight: 1.5kg.

 

Артикул: DE-120471 ,   Время доставки: 14-21 день
272,00 €

Питьевой фонтан напольный/настенный с наполнителем для бутылки ,механический Н/Р сталь AISI304

AFO 01.SL

drinking fountain with spout for filling bottles designed to stand and to be attached to wall

AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.

In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order. 

Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting. 

TAutomatic drinking fountain (with a sensor) can be supplied per order.

AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

Package contents

  • Stainless housing with cone
  • Pressure valve with jet
  • Pressure valve for bottle filling
  • Flexible hose outflow
  • Fixing and connecting material
dimensions 330 x 900 x 365 mm
water outlet d = 40 mm
water inlet G 1/2"
water pressure 2 - 6 Bar, recommended 3 Bar
weight 12 kg

 

  • Set up water outlet d = 40 mm
  • Set up water inlet G 1/2"

 

Артикул: AZP-AFO01.SL ,   Время доставки: 3-4 недели
1917,00 €