Категории

Промышленная,, хозяйственная сантехника нержавеющая сталь

Промышленная,, хозяйственная сантехника нержавеющая сталь
Сортировать по:
Показать как: список / сетку

 

 Для ценовых запросов на проект, или по поводу доставки в страны ЕС, просим присылать информацию на e-mail: info@pegu.ee 

Консультация по телефону 09.00-19.00, +372 515 0681

 

   

 

 

Valamu R/V terasest

Garaazi/koristusruumi jaoks

Артикул: I-GUB2 ,   Время доставки: 7-14 дней
238,00 €

Valamu R/V terasest

Garaazi/koristusruumi jaoks

Артикул: I-GUB1 ,   Время доставки: 14-21 день
143,10 € (10%)
159,00 €

Valamu R/V terasest

Garaazi/koristusruumi jaoks

Артикул: I-U1STD ,   Время доставки: 7-14 дней
164,70 € (10%)
183,00 €

Valamu R/V terasest

Garaazi/koristusruumi jaoks

Артикул: I-GUB3 ,   Время доставки: 14-21 день
220,50 € (10%)
245,00 €

Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" waste with plug and overflow.

Артикул: I-L1 ,   Время доставки: 14-21 день
172,80 € (10%)
192,00 €

Wall hung utility sink in stainless steel. Supplied with fixing brackets. 

Артикул: I-VK44STD ,   Время доставки: 14-21 день
102,00 €

Wall hung utility sink in stainless steel. Supplied with fixing brackets. 

Артикул: I-VK60STD ,   Время доставки: 14-21 день
153,00 €

Saappaidenpesuallas 7130

Saappaidenpesuallas 7130 on omilla jaloilla seisova allas, joka on suunniteltu käytettäväksi esim. päiväkodeissa kumisaappaiden ja kuravaatteiden huuhteluun sekä teollisuudessa hätäsuihkualtaaksi.

Tuote on kotimainen ruostumattomasta teräksestä valmistettu monikäyttöinen allas. Altaan reunat on pyöristetty turvallisiksi.

Altaan ulkomitat ovat 600x600x350 mm, sisämitat 550x550x250 mm. Allasta valmistetaan myös erikoismitoin.

Altaan mukana toimitetaan pohjaventtiili sekä pohjatulppa helmiketjulla. Altaan jaloissa on säätötassut, joilla se on helppo asentaa suoraan.

Артикул: KAV7130 ,   Время доставки: 14-21 день
624,00 €

automatic washing system for wellingtons with jets - 12V, 50Hz

 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Артикул: AZP-AMO 01 ,   Время доставки: 3-5 недель
1303,00 €

automatic washing system for wellingtons with jets - 12V, 50Hz

 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Артикул: AZP-RMP 02 ,   Время доставки: 3-5 недель
5755,00 €

automatic washing system for wellingtons with jets - 12V, 50Hz

 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Артикул: AZP-RMO 02 ,   Время доставки: 3-5 недель
6181,00 €
On võimalik versioonid , vertikaalsed, horisontaalsed D50mm,75mm,110mm
 
 
 
 

PV 01

stainless steel floor trap

   
 
 
 

PV 01 is a fully stainless floor trap with braz designed to drain showers, industrial premises and other inner spaces. The trap is designed as stepping (not driven-over). The trap is made of AISI 304 quality stainless steel. Detergents containing chlorine must not be used for cleaning. If chlorine is contained in the environment, we recommend custom-made model of another material (e.g. AISI 316).

For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

We produce other custom-made models – outlet d = 50 mm, 110 mm; without rim for waterproofing; alternative cover grid (mesh); without braz; with adjustable height, etc. Send us your requirements, we will promptly answer!

 

Version types
PV 01.D.75.P - floor trap d = 75 mm, smell trap, outlet down, rim for waterproofing, not adjustable
PV 01.D.75.S - floor trap d = 75 mm, smell trap , outlet down , rim for waterproofing, adjustable
PV 01.B.75.P - floor trap d = 75 mm, smell trap , outlet to the side, rim for waterproofing, not adjustable
PV 01.B.75.S - floor trap d = 75 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
PV 01.D.50.P - floor trap d = 50 mm, smell trap , outlet down , rim for waterproofing , not adjustable
PV 01.D.50.S - floor trap d = 50 mm, smell trap , outlet down , rim for waterproofing , adjustable
PV 01.B.50.P - floor trap d = 50 mm, smell trap , outlet to the side , rim for waterproofing , not adjustable
PV 01.B.50.S - - floor trap d = 50 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
PV 01.D.110.P - floor trap d = 110 mm, smell trap , outlet down , rim for waterproofing , not adjustable
PV 01.D.110.S - floor trap d = 110 mm, smell trap , outlet down , rim for waterproofing , adjustable
PV 01.B.110.P - floor trap t d = 110 mm, smell trap , outlet to the side , rim for waterproofing , not adjustable
PV 01.B.110.S - floor trap d = 110 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
 
 
Basic technical information
Minimum inner diameter: 70 mm
Diameter of connecting sewerage pipe: 75 mm
Water flow: min. 50 lts / min
Loading class: K3
Weight: 2,2 kg
 
 
Complete delivery
  • Trap body
  • Grid with braz cover
  • Hook to pull up the grid
 
 

 

Requirements for setting up the construction
  1. Completed sewerage drains terminated by DN 75 coupling
  2. Prepared hole in the floor with diameter min. 300 mm (200 mm without rim for waterproofing) and depth min. 120 mm
 
Артикул: AZP-PV 01.D.75.P ,   Время доставки: 3-4 недели
214,20 € (10%)
238,00 €
Артикул: DE-100930 ,   Время доставки: 1-2 недели
165,60 € (10%)
184,00 €
 

Characteristics

  • mounting on the wall
  • dimensions 394 x 394 x 114 mm
  • mirror - high polished finish
  • frame - brushed finish
Артикул: SA-SLZN82 ,   Время доставки: 14-21 день
535,00 €

Pesurenn konsoolidega 1800mm 

Артикул: I-P180V ,   Время доставки: 1-4 недели
324,00 € (10%)
360,00 €

Valamu R/V terasest

Garaazi/avalikude ruumidele

Артикул: PLVR36-NC-S ,   Время доставки: 7-14 päeva
375,00 €

Stainless steel floor standing bulk sink, 700x700x850 mm

 

Characteristics

  • stainless steel bulk sink with supporting legs with a sheating
  • without a tap hole (could be made to order)
  • possibility of fine plane regulation by the regulation screws on the supporting legs
  • available also in dimensions 600 x 600 x 850 mm
  • material CrNi 18/10 (AISI-304)
  • brushed finish
  • different dimensions could be made to order
Order number 93150
Code SLUN 15
Артикул: SA-SLVN 01 ,   Время доставки: 3-5 недель
306,00 €

Overall dimension in mm Ø174 x 235 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 2.50

Артикул: EL220-1080020 ,   Время доставки: 3-4 недель
375,00 €

Overall dimension in mm Ø300 x 382 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 7.70

Артикул: EL255-1080010 ,   Время доставки: 3-4 недели
935,00 €
Артикул: FP-004 ,   Время доставки: 7 недель
547,00 €
Артикул: FP-005 ,   Время доставки: 3-4 недели
625,00 €

Wall-mounted FRAJU PMR washbasin 
Ref. 121440

Wall-mounted washbasin, 620x505mm.
Suitable model for people with reduced mobility. 
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
With Ø 35mm central tap hole.
Supplied with 1¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5kg.

Артикул: DE-121440 ,   Время доставки: 1-2 недели
535,00 €
Артикул: DE-121430 ,   Время доставки: 1-2 недели
409,50 € (10%)
455,00 €

GENOU wall-mounted hand washbasin

 

 

Reference: 180330

 

CCTP description

Wall-mounted, knee-operated hand washbasin.

Bacteriostatic 304 stainless steel. Polished satin finish.

Stainless steel thickness: 1.2mm

Rounded edges prevent injury.

Supplied with swan neck spout and time flow

tap with 7 second time flow.

Supplied with 1 ¼" waste.

Without overflow.

Supplied with fixing elements.

CE marked. Complies with European standard EN 14688.

Weight: 5kg.

 

Артикул: DE-180330 ,   Время доставки: 14 дней
599,00 €

Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".

Артикул: I-U2 ,   Время доставки: 7-14 дней
183,60 €