Kvaliteetne santehnika, segistid ja vannitoa aksessuaarid – soodne müük e-poes PEGU.EE!
Loo oma unistuste interjöör! PEGU.ee – kvaliteetsed ja soodsad sisustuslahendused nii professionaalsetele sisekujundajatele kui ka koduomanikele. Värsked ideed, lai tootevalik ja mugav ostlemine internetis!
.webp)
Avasta PEGU.EE lai valik kvaliteetset santehnikat ja tarvikuid, sealhulgas prügikastid, kätekuivatid, rannadušid, koristajavalamud, laborivalamud ja hädaabidušid. Lisa sobivad kaubad ostukorvi ja kasuta promokoodi PEGU-KEVAD2025 erihindade saamiseks! Promokood kehtib toodetele, mis pole hetkel muudes kampaaniates.
Dušikomplekt Silhouet XS 1, peidetud paigaldus, harjatud messing PVD
Elegantne skandinaavia disain ja soe luksus.
Damixa Silhouet XS 1 dušikomplekt harjatud messing PVD viimistlusega lisab vannitoale ajatut soojust ja elegantset iseloomu. Matt kuldne pind sobib ideaalselt modernsesse, klassikalisse ja industriaalstiilis interjööri.
Komplekt sisaldab peadušši, käsidušši ja voolikut. Metallist kate ja käepide tagavad kõrge kvaliteedi ja pika kasutusea.
NB! Komplekt ei sisalda seinasisese termostaatsegisti mehhanismi.
Tehnilised andmed:
-
Keraamiline kassett
-
Metallist kate ja käepide
-
Komplektis peadušš, käsidušš ja voolik
-
Vihmadušš: max. 9 l/min
-
Käsidušš: max. 9 l/min
-
Paigaldussügavus: min 75 mm – max 105 mm
1175,00 €
Dušikomplekt Silhouet XS 1, peidetud paigaldus, grafiithall PVD
Minimalism, mis ei jää märkamatuks.
Damixa Silhouet XS 1 peidetav dušikomplekt grafiithall PVD viimistluses toob vannituppa põhjamaise stiili ja ajatult elegantse välimuse. See dušikomplekt on loodud neile, kes hindavad disaini, kvaliteeti ja mugavust.
Komplekt sisaldab vihmadušši, käsidušši ja dušivoolikut. Metallist katteplaat ja käepide lisavad vastupidavust ning kvaliteeti.
NB! Toodet tarnitakse ilma seinasisese termostaatsegisti karbita.
Tehnilised andmed:
-
Keraamiline kassett
-
Katteplaat ja käepide metallist
-
Komplektis: vihmadušš, käsidušš ja voolik
-
Vihmadušš: max. 9 l/min
-
Käsidušš: max. 9 l/min
-
Paigaldussügavus: min 75 mm – max 105 mm
1175,00 €
Mähkimislaud seinale Koala Kare horisontaalne KB300-05 plast.valge graniit
KB300 horisontaalne pinnapealne Baby mähkimislaud seinale on valmistatud tugevast polüpropüleenist ning sellel on sisemine terasraam, mis tagab suure vastupidavuse. Saadaval kolmes kaasaegses värvitoonis, sobib ideaalselt avalikesse ruumidesse, pakkudes turvalist ja mugavat lahendust väikeste lastega peredele.
Laua pinnal on Microban® antibakteriaalne kaitse, mis aitab vähendada lõhnatekitavate bakterite levikut ning hoiab pinna puhtamana puhastuste vahel. Patenteeritud topeltvoodrisahtel mahutab kuni 50 voodrit ja väljastab neid ükshaaval. Komplektis on lapse turvarihmad ja roostevabast terasest kottkonks. Pneumaatiline süsteem tagab aeglase ja ohutu avamise/sulgemise.
Mõõtmed:
• Kõrgus: 527,5 mm
• Laius: 897 mm
• Sügavus suletuna: 101,6 mm
• Sügavus avatuna: 539 mm
• Kaal: 15 kg
Vastab ADA, ASTM ja EN standarditele. Testitud kuni 200 naela (u 90 kg) kandevõimega.
1070,00 €
Mähkimislaud seinale Koala Kare horisontaalne KB300-01 plast.hall
KB300 horisontaalne pinnapealne Baby mähkimislaud seinale on valmistatud tugevast polüpropüleenist ning sellel on sisemine terasraam, mis tagab suure vastupidavuse. Saadaval kolmes kaasaegses värvitoonis, sobib ideaalselt avalikesse ruumidesse, pakkudes turvalist ja mugavat lahendust väikeste lastega peredele.
Laua pinnal on Microban® antibakteriaalne kaitse, mis aitab vähendada lõhnatekitavate bakterite levikut ning hoiab pinna puhtamana puhastuste vahel. Patenteeritud topeltvoodrisahtel mahutab kuni 50 voodrit ja väljastab neid ükshaaval. Komplektis on lapse turvarihmad ja roostevabast terasest kottkonks. Pneumaatiline süsteem tagab aeglase ja ohutu avamise/sulgemise.
Mõõtmed:
• Kõrgus: 527,5 mm
• Laius: 897 mm
• Sügavus suletuna: 101,6 mm
• Sügavus avatuna: 539 mm
• Kaal: 15 kg
Vastab ADA, ASTM ja EN standarditele. Testitud kuni 200 naela (u 90 kg) kandevõimega.
1070,00 €
Dušikomplekt Silhouet XS 1, peidetud paigaldus, harjatud vask PVD
Soojus ja modernsus sinu vannitoas.
Damixa Silhouet XS 1 dušikomplekt harjatud vase PVD viimistlusega toob vannituppa luksusliku ja ainulaadse hõngu. Elegantne matt vaskepind sobib suurepäraselt trendikatesse ja ajatuteks kujundatud vannitubadesse.
Komplekt sisaldab vihmadušši, käsidušši ja voolikut. Metallist kate ja käepide lisavad vastupidavust ja kvaliteeti.
NB! Komplekt ei sisalda seinasisese termostaatsegisti mehhanismi.
Tehnilised andmed:
-
Keraamiline kassett
-
Metallist kate ja käepide
-
Komplektis peadušš, käsidušš ja voolik
-
Peadušš: max. 9 l/min
-
Käsidušš: max. 9 l/min
-
Paigaldussügavus: min 75 mm – max 105 mm
1175,00 €
Köögisegisti QTOO stainless steel AISI316 - PVD messing poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
845,87 €
Touch bin sorteerimise prügikast, soft-close Brabantia BO, 2x30L Confident Grey
Made in:
Laius: 54.5cm
Sügavus: 31,2cm
Kõrgus: 65.6cm
Vaikselt sulguv.
Kerge puhastada - eemaldatav ämber.
Mittelibisevad jalad - stabiilne.
270,00 €
DOUBLE TOILET ROLL HOLDER WP 149
240 x 110 x 90 mm
for 2 rolls, lockable
- Double toilet roll holder in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel construction, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Designed for two standard toilet rolls with dimensions:
Outer diameter max. 125 mm
Width max. 100 mm
Core diameter min. 38 mm - Accessible for refilling by unlocking the center axis.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With two screws through fixing holes in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 0,9
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 764210 |
| highly polished | 732210 |
| (coloured) plastic powder - coating | 730210 |
Double toilet roll holder in stainless steel (AISI 304) for surface mounting. All-stainless steel construction, visible surfaces satin finished and brushed. Designed for two standard toilet rolls. Accessible for refilling by unlocking the center axis. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 240 x 110 x 90 mm
Article No. WP149
231,80 €
Käterätipuu FROST Quadra TOWEL BAR 5 600mm, RST harjatud must
CC600mm, single. Quadra. Q3016
205,00 €
X.Eclair TC Presto ref.13120, läbi seina paigaldus,nuputa auguta
Tagaseina auk on kini.
Recommended operating pressure: 1 to 5 bar
Flush volume: 6 to 9 l, adjustable by operating the shut-off valve Anti-water hammer device
Flow time: 7 to 9 seconds
Hydraulic supply: In line, double male G 1"1/4 (33x42) Outlet connection on flush tube Ø 32 mm
Material and colour of finish: Brass body, raw
Delivered with: 1 Flash box with syphonic action 1 Assembly instructions
Standards / Approvals : Brass body in compliance with NF EN1982 / NF EN12164 / NF EN12165 standards
195,00 €
Desinfektandi dosaator Mediclinics 1.5L R-V teras, epoxy must
250 x 110 x 175 mm
• Spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
• Available in four finishes (white, black, bright and satin) these foam soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid disinfectant soaps.
213,00 €
Desinfektandi dosaator Mediclinics 1.5L R-V teras, epoxy valge
250 x 110 x 175 mm
• Spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
• Available in four finishes (white, black, bright and satin) these foam soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid disinfectant soaps.
195,00 €
Desinfektandi dosaator Mediclinics 1.5L R-V teras harjatud
250 x 110 x 175 mm
• Spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
• Available in four finishes (white, black, bright and satin) these foam soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid disinfectant soaps.
177,00 €
Desinfektandi dosaator Mediclinics 1.5L R-V teras poleeritud
250 x 110 x 175 mm
• Spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
• Available in four finishes (white, black, bright and satin) these foam soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid disinfectant soaps.
177,00 €
165,00 €
TRANSLATE PAGE
change to you language
Santehnika ja vannitoaaksessuaarid e-poes PEGU.EE
E-MAIL: info@pegu.ee
Кonsultatsioon +372 515 0681
9.00-19.00
