Дозаторы для дезинфекции

Wall-mounted electronic liquid soap dispenser, 1 litre 
Ref. 512066W

Wall-mounted electronic liquid soap dispenser, 1 litre 
Ref. 512066P

Wall-mounted electronic liquid soap dispenser, 1 litre 
Ref. 512066S

Practising hand hygiene is a simple yet effective way to prevent infections in your home, in daycares, in the health sector, at the workplace, etc. It is recommended to use an alcohol-based hand sanitizer if soap and water are not available.

DAN DRYER sanitizing gel contains skin softening glycerol. The product is used for disinfection of hands and fingernails. Comes in a 5 Litre plastic container and can be filled into all DAN DRYER's disinfectant dispensers.

Normbau 2290044 дозатор настенный для мыла/дезинфектанта, 82 x 159 x 272mm, 500 ml

Normbau 2290044 desinfektandi ja seebi dosaator, 82 x 159 x 272mm, 500 ml

Disinfectant and soap dispenser, 82 x 159 x 272mm, 500 ml

Disinfectant and soap dispenser with short arm lever
Made of stainless steel, material no. 1.4301 (A2-AISI 304), with cranked stainless steel pump, optimal for easy bottle change, output adjustable (ca. 0,8ml/1,2ml/1,8ml per pass), delivery with maximal output of 1,8ml per pass, suitable for disinfectants, liquid soaps and thin lotions, for currently available Euro bottles, the stainless steel pump and the dispenser are hot steam autoclavable (121° C at 1 bar pressure), supplied with empty refill bottle

Praesidio дозатор для дезинфекции, бесконтактный, 1000ml

Touchless dispenser of alcoholic disinfectant, 1000 ml, stainless steel, gound, door white powder coated (RAL 9010), autoclavable stainless steel pump with exact spray cone, adjustable dosage (approx. 0.75/ 1.0/ 1.2 /1.5 ml), hygienic spray chamber, integrated drip tray, incl. HDPE-bottle and 5 Alkaline D-cell batteries. With contact switching: Door opens after dispenser actuation.

RX 5 T настенное крепление для дозатора

Art. no. 4401226

87 x 248 x 120 mm

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting in cabinet on site.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard disinfectants. Refillable from the top. 
• Note: Not approved for medical areas.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With three screws through key holes in the back wall. 
• Delivery includes fixing material, batteries and self-adhesive information label „disinfectant“.

• Weight (in kg): 1,1

86 x 242 x 150 mm

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting behind fixed mirror on site.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below. 
• Note: Not approved for medical areas.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
  Depth of substructure installation: min. 185 mm
  Height above vanity unit: min. 270 mm
• Delivery includes fixing material, batteries and self-adhesive information label „Disinfectant“.

• Weight (in kg): 1,3

400 x 1350 x 400 mm
950 ml tank

• Hygiene station consisting of a sensor-disinfectant dispenser and a floor-stand in robust, germ-reducing and easy-care stainless steel.
• Visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Sensor-disinfectant dispenser in stainless steel (AISI316L); all corners fully welded.
  • With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
  • Designed for standard disinfectants.
  • Inspection slot to indicate fill level. 
  • Accessible for refilling through lockable, hinged housing. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
  • eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  • Wear parts can be replaced as modules.
  • Delivery includes batteries.
• Floor-stand in stainless steel (AISI304) 
  • Base plate with rubber feet.
  • Intended for free floor installation.

• Weight (in kg): 10,3

380 x 1350 x 380 mm
950 ml tank

• Hygiene station consisting of a sensor-disinfectant dispenser and a floor-stand in robust, germ-reducing and easy-care stainless steel.
• Visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Sensor-disinfectant dispenser in stainless steel (AISI316L) with rounded vertical corners.
  • With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
  • Designed for standard disinfectants.
  • Inspection slot to indicate fill level. 
  • Accessible for refilling through lockable, hinged housing. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
  • eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  • Wear parts can be replaced as modules.
  • Delivery includes batteries.
• Floor-stand in stainless steel (AISI304) 
  • Base plate with rubber feet.
  • Intended for free floor installation.

• Weight (in kg): 10,1

300 x 500 x 300 mm
950 ml tank

• Hygiene station consisting of a sensor-disinfectant dispenser and a table-stand in robust, germ-reducing and easy-care stainless steel.
• Visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Sensor-disinfectant dispenser in stainless steel (AISI316L); all corners fully welded.
  • With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
  • Designed for standard disinfectants.
  • Inspection slot to indicate fill level. 
  • Accessible for refilling through lockable, hinged housing. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
  • eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  • Wear parts can be replaced as modules.
  • Delivery includes batteries.
• Table-stand in stainless steel (AISI304) 
  • Base plate with rubber feet and removable receptacle.
  • Intended for free installation.

• Weight (in kg): 5,6

71 x 230 x 121 mm

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting behind fixed mirror on site.
• One-hand operation disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below. 
• Note: Not approved for medical areas.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
  Depth of substructure installation: min. 160 mm
  Height above vanity unit: min. 280 mm
• Delivery includes fixing material and self-adhesive information label „Disinfectant“.

• Weight (in kg): 0,7

for WP102e-7S
220 x 25 x 255 mm

Order numbers:
satin finished: 923133
RAL-powder coated: 923133-RAL

Бесконтактный водяной кран+дозатор для мыла+дозатор для дезинтификанта MWSD bent

Multifunctional touchless faucet, water and soap in one unit, countertop integration.
Simple Touchless operation, the untouchable™ makes use of an elegant infrared interface, operated through a simple process: select above, receive under. By swiping above the untouchable™ - in any direction - the dispenser cycles through the available liquids. When a desired liquid is selected, the hand is simply placed under the faucet. Compatible with 1,000 ml standard Euro bottles, suitable for low-viscosity soaps and lotions, refillable using bottles with wide neck, dosage (depending on viscosity): soap approx. 2 ml, value can be changed on request before delivery

Бесконтактный водяной кран+дозатор для мыла+дозатор для дезинтификанта MWSD straight

Multifunctional touchless faucet, water and soap in one unit, countertop integration.
Simple Touchless operation, the untouchable™ makes use of an elegant infrared interface, operated through a simple process: select above, receive under. By swiping above the untouchable™ - in any direction - the dispenser cycles through the available liquids. When a desired liquid is selected, the hand is simply placed under the faucet. Compatible with 1,000 ml standard Euro bottles, suitable for low-viscosity soaps and lotions, refillable using bottles with wide neck, dosage (depending on viscosity): soap approx. 2 ml, value can be changed on request before delivery

86 x 298 x 120 mm
950 ml tank

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing with rounded vertical corners, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Designed for standard disinfectants for hands.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and batteries.

• Weight (in kg): 1,7

86 x 298 x 120 mm
950 ml tank

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing with rounded vertical corners, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Designed for standard disinfectants for hands.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and batteries.

• Weight (in kg): 1,7