Комплект для туалета в больнице, клинике
❓ Не уверены, какой товар подходит именно вам?
PEGU.ee поможет с выбором — обращайтесь к нашему эксперту с 25+ летним опытом в сантехнике и дизайне.
Написать нам
Kroom FMM-nr:1641-0000
- Temperatuuriseade nupuga, akutoitel (aku kaasas)
- Vandalismikindel, kest üleni metallist
- ECO funktsioon (vett ja energiat säästev õhusti 5 l/min)
- Aegreleega loputuse lõpetus üleujutamise vältimiseks
- 30-sekundiline loputusaeg (anduriga)
- Võimalik välja lülitada 60 sekundiks (näiteks puhastamiseks)
- Madal voolutarve, pikk eluiga
- Võimalik kuuma veega läbi loputada, et desinfitseerida legionella vastu
- IP-klassi andur, IP67
- Keskkonnasõbralik materjal, pliivaba, niklivaba
Paigaldamine: - Anduri automaatne kalibreering
- Pärast seadistamist sobivale temperatuurile, on võimalik nupp asendada ehiskaanega
- Kõiki mudeleid on võimalik kasutada nii 6V aku toitel või 12V vooluadapteriga
- Võrguvoolu kasutamiseks on tarvis paigaldada vooluadapter 1623-0000 ja toide FMM 1619-4000 või teise võimalusena trafo FMM 1619-3000
- Pehmed PEX® voolikud koos integreeritud tagasilöögiklappide ja filtritega (roostevabast terasest)
- Ava läbimõõt Ø 33,5–37 mm
Seaded: - Reguleeritav maksimaalne temperatuur
- Programmeeritav hügieeniloputuse funktsioon
- Seadistatav loputusaeg
Keskselt juhitav mudel: - Komplektis kaabel, millega on võimalik juhtida hügieeniloputust
- Loputus toimub, kui sissevool on suletud
Cмеситель для раковины IR сенсорный Core 6V хром
СПРОСИ ЦЕНУ! ПРОЕКТНЫЙ ТОВАР
Стандартные функции:
- Керамический картридж
- Стандартная установка
- Расход воды максимум 5 л/мин
- Легкая регулировка температуры и потока
- Небольшой контейнер для батареи на липучке
- Не требует дополнительного места
- Гигиеничный
С Core от Damixa мы создали всеобъемлющее решение для строительных проектов, которое удовлетворяет потребности как клиента, так и конечного пользователя. Решение, где мы можем отметить все экологические и документационные требования в отрасли, и в то же время дополнить его первоклассным обслуживанием.
Core от Damixa говорит на понятном всем функциональном языке, и вы не сможете ничего упрекнуть в его вневременном дизайне крепления, который доступен как в матовом черном, так и в хроме. Серия, естественно, доступна для кухни, ванны и душа, и, таким образом, является полноценной от поставки до использования. Проектная серия, завершенная до мельчайших деталей.
Вся суть. Срезано до ядра.
Invakäepide
Keraamiline tööorgan
Tilting mirror with long ergonomic lever
Ref. 510201N
Tilting mirror with long ergonomic lever which facilitates adjustment of mirror angle from a sitting position or by wheelchair users.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: just clip into place.
Anti-theft lock.
Bright white HR Nylon lever
6mm thick Securit safety glass mirror.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Technical features
Tilting mirror with long ergonomic lever
Ref. 510201N
| Height | 500mm |
|---|---|
| Depth | 230mm |
| Width | 630mm |
| Width to the wall | 70mm |
| Thickness | 6mm |
| Finish | Bright white HR Nylon |
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
SECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
No spout: BIOSAFE hygienic outlet integrated into the body.
Anti-scalding safety: HW flow rate is reduced if CW supply fails.
Securitouch thermal insulation prevents burns.
Ø 35mm ceramic cartridge with pressure balancing.
Pre-set maximum temperature limiter.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Body with smooth interior and very low water volume (reduces bacterial development).
Flow rate limited to 4 lpm at 3 bar.
Solid control lever.
Mixer without pop-up waste.
Reinforced fixing via two stainless steel rods.
Supplied with copper tails and Ø 15mm stopcocks.
TECHNICAL FEATURES
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
| Connector | M1/2" |
|---|---|
| Technology | SECURITHERM EP BIOSAFE |
| Height | 180mm |
| Length | 220mm |
| Drop height | 95mm |
| Spout length | 110mm |
| Flow rate | 4 lpm |
| Temperature limiter | 41°C |
| Finish | Chrome-plated brass |
Wall mounted MINERALCAST PMR washbasin
Ref. 132306
Wall-mounted washbasin, 785 x 545 x 150mm.
With integral side grips, can be used to support user or as a towel rail.
Sleek and fluid lines.
MINERALCAST: a composite material consisting of natural minerals and polyester resin.
Suitable for use in public and commercial places and the healthcare sector.
Shallow washbasin ideal for people with reduced mobility.
Uniform, non-porous surface is easy to clean.
One-piece pressed washbasin, seam-free, for easy maintenance and better hygiene.
Warm to the touch.
With Ø 35mm central tap hole.
Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 21.5 kg.
CURVE series wall mounted electronic basin/sink mixer with infrared sensor. 230V mains supply
Mechanical mixing with side lever
Swivel spout H=250 mm, projection 200 mm
Infrared sensor with ON/OFF mode
Vandal proof stop after 1 min of continuous flow
Automatic anti-legionella water flow every 24h after last use
External power supply 230V AC/6V DC, protection grade IP65; cable with European plug (C); anti black-out device to ensure the shut off of the tap even in case power cut
6V “Micro“ solenoid valve (internal)
ONE series electronic basin mixer with infrared sensor. 230V mains supply
Mechanical mixing with side lever
Infrared sensor with activation on presence detection
Vandal proof stop after 1 min of continuous flow
Automatic anti-legionella water flow every 24h after last use
External power supply 230V AC/6V DC, protection grade IP65; cable with European plug (C); anti black-out device to ensure the shut off of the tap even in case power cut
6V “Micro“ solenoid valve (internal)
Aerator with 6 l/min. flow limiter
• Surface mounted spare toilet roll holder, made of AISI 304 stainless steel, with concealed fixings, satin finish.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• The slim and elegant shape creates a perfectly understated way to organize the bathroom life.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to the wall are provided.
STAINLESS STEEL SOAP DISH
Soap dish made of AISI 304 stainless steel, satin finish
• Automatic countertop-mounted soap dispenser, 1.6 l capacity, manufactured in chromed brass, bright finish.
• Available in bright finish, this automatic countertop-mounted soap dispenser has a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid soaps with neutral pH, chlorine free and density between 2,000 and 3,500 cP. Surgical soaps and soaps with solid abrasive particles are not supported.
• Manual centre feed paper towel dispenser, surface mounted, designed and manufactured by Mediclinics.
• Robust and vandal-resistant, these dispensers are designed to be installed in any type of public washroom with high traffic of people. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centers, hospitals and health centers, restaurants and similar type of installations; solutions even for use in different places.
• All these models have a front sliding door, especially designed for an easy paper replacement. They have been designed to facilitate and optimize the rational use of the paper, such as for example the toothed paper outlet that facilitates the paper cutting.
• All Mediclinics paper tower dispensers are supplied with a lock and special key for opening and screws.
Technical specifications
Dimensions 261x376x261mm
Paper roll capacity MAX d270mm
Paper height Max 270mm
Thickness of metal components 0.8mm
Weight (empty) 3.1
material:AISI 304 stainless steel | finish:Satin
90º angled grab bar
Solutions with several ergonomics and functionalities and with the possibility of having different materials and finishes. Mediclinics offers professionals a wide range of grab bars for toilets to help persons with reduced mobility use the facilities. Within this range, two product lines are available:
Medinox Series
State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright and satin finish.
Mediepoxy Series
Solutions manufactured with a corrosion resistant treatment, ideal for very harsh environments, with a low need for maintenance and long durability. The grab bars for toilets are made of steel with an epoxy finish.
Mediclinics grab bars for toilets include a snap flange cover for installation out of sight, offering a perfect visual finish and allowing to be easily blended in with the decoration of the room.
Apart from the grab bars for toilet, Mediclinics provides shower seats made of AISI 304 stainless steel, which are robust, safe and suitable for installation in harsh environments.
Mediclinics инвалидная ручка 1200mm прямая сатинированная Н/Р сталь
Mediclinics инвалидная ручка 997mm прямая сатинированная Н/Р сталь
• Straight grab bar with snap flange made of AISI 304 stainless steel, for horizontal, vertical or slanting installation.
• Suitable for specific bathrooms for people with mobility problems, elderly people or the handicapped. Model suitable for both home and public use.
• This safety bar provides an easily accessible grip all around.
• Highest durability and rusting resistance.
• Optionally, they have a kit to avoid electrical conductivity (code KA0020).
• Stainless steel nuts and volts for masonry walls included.
• Straight grab bar with snap flange made of AISI 304 stainless steel, for horizontal, vertical or slanting installation.
• Suitable for specific bathrooms for people with mobility problems, elderly people or the handicapped. Model suitable for both home and public use.
• This safety bar provides an easily accessible grip all around.
• Highest durability and rusting resistance.
• Optionally, they have a kit to avoid electrical conductivity (code KA0020).
• Stainless steel nuts and volts for masonry walls included.
General description
L454 x L869 mm
-
Grab bar, 90o angle to the right (BAD090C & BAD090CS) or to the left (BAI090C & BAI090CS) with snap flange cover, made of stainless steel AISI 304, for showers, baths and changing rooms.
-
These grab bars are very useful and highly recommended to achieve barrier-free accessibility both residential and public spaces.
-
Concealed screw mounting flanges.
-
Highest durability and rusting resistance.
-
Mounting hardware for brick wall is included for easy installation.
Components and materials
-
BAD090C & BAI090C: AISI 304 stainless steel, bright finish.
-
BAD090CS & BAI090CS: AISI 304 stainless steel, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along
the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes
for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 1.5 mm thick and Ø 82 mm. Each cover snaps over mounting
flange to conceal mounting screws.
Mediclinics инвалидная ручка 997mm прямая сатинированная Н/Р сталь
• Straight grab bar with snap flange made of AISI 304 stainless steel, for horizontal, vertical or slanting installation.
• Suitable for specific bathrooms for people with mobility problems, elderly people or the handicapped. Model suitable for both home and public use.
• This safety bar provides an easily accessible grip all around.
• Highest durability and rusting resistance.
• Optionally, they have a kit to avoid electrical conductivity (code KA0020).
• Stainless steel nuts and volts for masonry walls included.
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
Technical specifications
Dimensions 825 x 807 x 100 mm
Bar and leg diameter Wall plate thickness Ø 32 mm 3,0 mm
Paper roll dispenser diameter Ø 10 mm
-
Components y materials
-
FOLDING BAR: folded in a trapezoidal shape and manufactured with a 32 mm diameter AISI 304 stainless steel tube satin finish. Both bar ends are welded to the vertical column, made of a 32 mm diameter stainless steel AISI 304 tube. The grip zones of the bar have a safety anti-slip finish to improve the user safety. It incorporates a paper roll holder 120 mm length, made of a 6 mm diameter AISI 304 stainless steel rod.
-
WALL MOUNTING PLATE: made of an AISI 304 stainless steel satin finish rectangular plate of 125 x 100 mm and 10 mm thick. It incorporates four Ø 8 mm countersunk holes, to fix the bar to the wall.
-
FLOOR MOUNTING PLATE: made of an AISI 304 stainless steel satin finish circular plate of Ø 75 mm and 5 mm thick. It incorporates three Ø 7 mm countersunk holes to fix the bar on the floor.
-
UNLOCK HANDLE: made of black thermoplastic.
BG0089CS Satin finish
Technical specifications
Dimensions
Grab bar and column diameter Wall mounting plate thickness Floor mounting plate thickness Paper roll holder diameter
700 x 835 x 100 mm
Ø 32 mm 10.0 mm 5.0 mmØ 6.0 mm
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
Käetugi 537mm sirge
R/V teras AISI304
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
R/V teras AISI304 harjatud
*Н/Р сталь 0,8 mm, матовый
*AISI304
*В комплекте крепление на стену
Бесконтактный сенсорный кран для раковины PRESTO Linea 3l/min 230V
Sensoriga kraan valamule kontaktivaba PRESTO Linea 64679 3l/min 230V
Range: PRESTO LINEA®
Ref: 57200 - Deck-mounted sensor single tap for washbasin, mains 230V, 3l/min with stop valve
> Working pressure:
1 to 5 bar
> Function:
Starts and stops automatically by hand detection
Sensor trigger suitable for PRM, elderly, children and disabled people
> Flow:
3l/min at 3 bar with integrated regulated anti-limescale aerator
> Hydraulic supply:
F G 3/8" (12x17) hose
> Power supply:
Mains-operated with 230 V AC / 7 V DC transformer in IP65 waterproof case
> Material and colour finish:
Chrome-plated brass body with smooth inside body Chrome-plated molded metal cover
> Thermal resistance:
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security:
Anti-overflow security time set to 30 seconds preventing the water to flow continuously Automatic shutdown of solenoid valve in case of power failure or sensor damage
Duty flush 30 sec every 24h after last use (adjustable flow time and frequency)
Low battery alert (blinking led light)
> Installation:
Recommended installation : 30 cm minimum between the sensor and the basin
> Delivered with:
1 Brass clamping nut, 1 Gasket and 1 WasheTr
1 PEX hose with revolving nut and filter gasket
1 M M G 3/8" (12x17) stop valve
1 Self-adhesive sticker
1 Instruction manual
> Standards & approvals:
Brass body in accordance with NF EN1982, EN12164, NF EN 12165,
UBA list compliant
200-hour neutral salt spray resistant (NSS) in accordance with NF ISO 9227
PRESTO SAFE
Ref: 64681 - Single deck-mounted sensor tap - 1,9l/min
> Working pressure :
2 to 5 bar
> Flow :
1.9 l/min with integrated spray flow regulator High quality anti-limescale aerator Anti-water-hammering design
> Flow time:
7 sec adjustable with PRESTOCOM : http://www.presto.fr/whatabout/prestocom/ Sensor trigger suitable for elderly and disabled people
> Hydraulic supply :
G 1/2" (15x21) - Cold or premixed water
> Power supply :
Integrated 9Vlithium battery
> Material and colour finish :
Brass body Chrome finishing
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Automatic shutdown of solenoid valve in case of power failure or sensor error Duty flush 30 sec each 24h after last use (adjustable flow time and frequency) Low battery alert (blinking led light)
> Delivered with :
1 Brass clamping nut
1 Gasket and 1 Washer 1 Filter gasket
1 Self-adhesive sticker Instruction manual
> Standards & approvals :
Brass body in accordance with NF EN1982, EN12164, NF EN 12165, UBA list compliant 200-hour neutral salt spray resistant (NSS) in accordance with NF ISO 9227
ACS
Держатель для туалетной бумаги JUMBO , большой, Н/Р сталь, матовый
R/V teras AISI304 , max rull d275mm
