Набор для туалета в лобби отеля – дизайн и гигиена | PEGU.ee

Туалетный комплект для фойе отеля – современный стиль и надежность
PEGU.ee предлагает продуманные комплекты для туалетных комнат в фойе отелей – сочетание стиля, функциональности и надежности.
Эти комплекты идеально подходят для общественных зон с высокой проходимостью, обеспечивая чистоту и гармоничный внешний вид.
Ассортимент включает популярные отделки – хром, черный матовый, нержавеющая сталь, латунь.
Бренды: Tork, Mediclinics, Wagner Ewar, Dan Dryer – лидеры в сфере гигиенического оборудования.
Отличный выбор для гостиничных вестибюлей, зон ожидания и конференц-залов.
❓ Не уверены, какой товар подходит именно вам?
PEGU.ee поможет с выбором — обращайтесь к нашему эксперту с 25+ летним опытом в сантехнике и дизайне.
Написать намKroom FMM-nr:1641-0000
- Temperatuuriseade nupuga, akutoitel (aku kaasas)
- Vandalismikindel, kest üleni metallist
- ECO funktsioon (vett ja energiat säästev õhusti 5 l/min)
- Aegreleega loputuse lõpetus üleujutamise vältimiseks
- 30-sekundiline loputusaeg (anduriga)
- Võimalik välja lülitada 60 sekundiks (näiteks puhastamiseks)
- Madal voolutarve, pikk eluiga
- Võimalik kuuma veega läbi loputada, et desinfitseerida legionella vastu
- IP-klassi andur, IP67
- Keskkonnasõbralik materjal, pliivaba, niklivaba
Paigaldamine: - Anduri automaatne kalibreering
- Pärast seadistamist sobivale temperatuurile, on võimalik nupp asendada ehiskaanega
- Kõiki mudeleid on võimalik kasutada nii 6V aku toitel või 12V vooluadapteriga
- Võrguvoolu kasutamiseks on tarvis paigaldada vooluadapter 1623-0000 ja toide FMM 1619-4000 või teise võimalusena trafo FMM 1619-3000
- Pehmed PEX® voolikud koos integreeritud tagasilöögiklappide ja filtritega (roostevabast terasest)
- Ava läbimõõt Ø 33,5–37 mm
Seaded: - Reguleeritav maksimaalne temperatuur
- Programmeeritav hügieeniloputuse funktsioon
- Seadistatav loputusaeg
Keskselt juhitav mudel: - Komplektis kaabel, millega on võimalik juhtida hügieeniloputust
- Loputus toimub, kui sissevool on suletud
SILHOUET
Touchless Valamusegisti Public kroom
7402000
Kroom
Silhouet
Claus Rantzau
5708516829126
TEMPOMATIC MIX 3 electronic mixer
Ref. 492006LH
Deck-mounted electronic basin mixer:
Battery-operated with integrated 223 6V Lithium batteries.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated solid brass body.
Cap fixed in place by 2 concealed screws, with pictogram to easily identify sensor.
PEX flexibles with stopcocks, filters and non-return valves.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Side temperature control with long lever and adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
TEMPOMATIC MIX 3 electronic mixer
Ref. 492006LH
Supply | 6V battery |
---|---|
Connector | F3/8" |
Technology | Electronic |
Drop height | 100mm |
Spout length | 120mm |
Flow rate | 3 lpm |
R/V teras WN 1.4301
kaal 2,3 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 500 tk
SENSOR DISINFECTANT DISPENSER PP 101E-7
86 x 257 x 120 mm
700 ml tank
- Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing with rounded vertical corners, visible surfaces satin finished and brushed.
Further available surfaces: see below. - With EWAR® eModule touch-free operated disinfectant pump with 700 ml tank.
- Designed for standard disinfectants for hands.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- eModule battery-powered with two 1.5 V Baby/LR14 batteries.
Power supply available as an option. - Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and batteries.
- Weight (in kg): 1,8
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727817 |
highly polished | 731817 |
(coloured) plastic powder - coating | 728817 |
DISINFECTANT DISPENSER PP 102-7
80 x 298 x 120 mm
950 ml tank
- Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing with rounded vertical corners. Visible surfaces satin finished and brushed. Further available surfaces: see below.
- One-hand operated disinfectant pump with 950 ml tank.
- Tank with large, lockable refill opening.
- Designed for standard disinfectants for hands.
- Note: Not approved for medical areas.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 1,1
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727334 |
highly polished | 731334 |
(coloured) plastic powder - coating | 728334 |
DISINFECTANT DISPENSER PP 101-7
80 x 248 x 120
700 ml tank
- Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing with rounded vertical corners. Visible surfaces satin finished and brushed.
Further available surfaces: see below. - One-hand operated disinfectant pump with 700 ml tank.
- Tank with large, lockable refill opening.
- Designed for standard disinfectants for hands.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 1,2
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727349 |
highly polished | 731349 |
(coloured) plastic powder - coating | 728349 |
DISPOSAL FLAP WITH MOUNTING FRAME WP 135
298 x 148 x 32 mm
- Self-closing, flame-retardant disposal flap with mounting frame in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel construction; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Mounting: With four screws on the inside, sideways.
- Installation dimensions: 254 x 130 mm
- Delivery includes fixing material.
- Weight (in kg): 0,8
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 764220 |
highly polished | 741220 |
(coloured) plastic powder - coating | 728221 |
Self-closing, flame-retardant disposal flap with mounting frame in stainless steel (AISI 304) for under-counter mounting at the front side. All-stainless steel construction; visible surfaces satin finished and brushed. Delivery includes fixing material.
Dimensions: 298 x 148 x 10 mm
Article No. WP135
DISPOSAL FLAP WITH MOUNTING FRAME WP 135
298 x 148 x 32 mm
- Self-closing, flame-retardant disposal flap with mounting frame in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel construction; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Mounting: With four screws on the inside, sideways.
- Installation dimensions: 254 x 130 mm
- Delivery includes fixing material.
- Weight (in kg): 0,8
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 764220 |
highly polished | 741220 |
(coloured) plastic powder - coating | 728221 |
Self-closing, flame-retardant disposal flap with mounting frame in stainless steel (AISI 304) for under-counter mounting at the front side. All-stainless steel construction; visible surfaces satin finished and brushed. Delivery includes fixing material.
Dimensions: 298 x 148 x 10 mm
Article No. WP135
DISPOSAL FLAP WITH MOUNTING FRAME WP 136
326 x 173 x 32 mm
- Self-closing, flame-retardant disposal flap with mounting frame in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel construction; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Mounting: With four screws on the inside, sideways.
- Installation dimensions: 282 x 155 mm
- Delivery includes fixing material.
- Weight (in kg): 0,8
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 764657 |
highly polished | 731657 |
(coloured) plastic powder - coating | 728657 |
Self-closing, flame-retardant disposal flap with mounting frame in stainless steel (AISI 304) for under-counter mounting at the front side. All-stainless steel construction; visible surfaces satin finished and brushed. Delivery includes fixing material.
Dimensions: 326 x 173 x 10 mm
Article No. WP136
Prügikast 23l
harjatud, R/V teras AISI304
• Vertical surface-mounted baby changing stations made of bacterial-resistant polypropylene and with AISI 304 stainless steel exterior.
• BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability.
• Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly.
• Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes.
• BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon.
• A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand.
• BabyMedi® units fully comply with the EN 12221-1 and EN 12221-2 standards that require baby changing stations be able to support a 50 Kg static load test during one hour.
• Horizontal surface-mounted baby changing station made of bacterial-resistant polypropylene and with AISI 304 stainless steel exterior.
BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability.
• Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly.
• Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes.
• BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon.
• A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand.
• BabyMedi® units fully comply with the EN 12221-1 and EN 12221-2 standards that require baby changing stations be able to support a 50 Kg static load test during one hour. Moreover, units tested in our own laboratories have withstood loads over 100 kg.
Пеленальный столик Robust Alu 309, для помещений общего пользования
DIMENSIONS
Width: 660 mm, Height: 780 mm, Depth closed: 200 mm, Depth open: 770 mm
Rootsi
Puu+alumiinium