Бренд
Категории

Новинка! Сенсорные бесконтактные дозаторы для рулонных полотенец, нержавеющая сталь

Новинка! Сенсорные бесконтактные дозаторы для рулонных полотенец, нержавеющая сталь
Сортировать по:
Показать как: список / сетку

 

Touchless paper towel dispenser, for paper rolls

HTU 1 Midnight

Stainless steel powder coated matte black (RAL 9005), lockable, with fill level window, the resi- dual roll function automatically loads the next roll and helps to eliminate unnecessary waste

Paper feed: 

HTU 1 P Midnight

Touchless paper feed: Paper stays within the dispenser until a hand is detected underneath the outlet - delay and paper length adjustable

Paper Type

Paper rolls:
max. roll width 200 mm, max. roll diameter 190 mm, min. inside diameter for outlet type 38 mm

Power supply: With 4 D-batteries

Dimensions:W 279 x H 407 x D 211 mm

 

Stainless steel, powder coated matte black

Art. No.1420972

Артикул: OPH-1420972 ,   Время доставки: 14-21 день
481,90 €

HTU 1 E AFP

Article no. 3400351

 

SanTRAL HTU 1 E AFP touchless paper towel dispenser, for paper rolls, with window. Max. roll width 200mm, max. roll diameter, 190mm, min. inside diameter for paper withdrawal 38mm, stainless steel, anti-fingerprint-coating, lockable, to use with 4 D-batteries for a total of 6 volts.

Stainless Steel with Anti-Fingerprint-Coating    
Paper roll towel    
Touchless    
Lock

 Measurements: 278 x 406 x 211

Артикул: OPH-HTU1 E AFP ,   Время доставки: 14-21 день
481,90 €

HTU 1 P

Article no. 3400359

 

SanTRAL HTU 1 P touchless paper towel dispenser, for paper rolls, with window. Max. roll width 200 mm, max. roll diameter, 190 mm, min. inside diameter for paper withdrawal 38mm, stainless steel, white powder coated (RAL 9010), lockable, to use with 4 D-batteries for a total of 6 volts.

Stainless Steel with Anti-Fingerprint-Coating    
Paper roll towel    
Touchless    
Lock

 Measurements: 278 x 406 x 211

Артикул: OPH-HTU 1P ,   Время доставки: 14-21 день
481,90 €

Дозатор бесеонтактный для бумажных полотенец  Wagner Ewar 1 рулон на батарейках Н/Р сталь полированный

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1301

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733220
highly polished 730220
(coloured) plastic powder - coating 729220
Suggested text for specifications:

Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1301
Артикул: WAG-WP1501P ,   Время доставки: 14-21 день
904,02 € (5%)
951,60 €

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1301

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733220
highly polished 730220
(coloured) plastic powder - coating 729220
Suggested text for specifications:

Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1301
Артикул: WAG-WP1501 ,   Время доставки: 14-21 день
805,51 € (5%)
847,90 €

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1300

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. 
  • Designed for one paper roll with dimensions:
    Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733210
highly polished 731210
(coloured) plastic powder - coating 729210
Suggested text for specifications:

Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1300
Артикул: WAG-WP1500P ,   Время доставки: 14-21 день
904,02 € (5%)
951,60 €

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1300

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. 
  • Designed for one paper roll with dimensions:
    Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733210
highly polished 731210
(coloured) plastic powder - coating 729210
Suggested text for specifications:

Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1300
Артикул: WAG-WP1500 ,   Время доставки: 14-21 день
805,51 € (5%)
847,90 €

Дозатор для бумажных полотенец у с сенсором Wagner Ewar 1+1 рулон на батарейках Н/Р сталь полированный

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER WITH RESERVE ROLL BATTERY POWERED WP 1401

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
    Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733260
highly polished 732260
(coloured) plastic powder - coating 728260
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1401
Артикул: WAG-WP1401P ,   Время доставки: 14-21 дней
1014,13 € (5%)
1067,50 €

Дозатор для бумажных полотенец у с сенсором Wagner Ewar 1+1 рулон на батарейках Н/Р сталь сатин

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER WITH RESERVE ROLL BATTERY POWERED WP 1401

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
    Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733260
highly polished 732260
(coloured) plastic powder - coating 728260
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1401
Артикул: WAG-WP1401S ,   Время доставки: 14-21 дней
886,64 € (5%)
933,30 €

Дозатор для бумажных полотенец у с сенсором Wagner Ewar 1+1 рулон с трансформатором Н/Р сталь полированный

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1400

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733250
highly polished 732250
(coloured) plastic powder - coating 728250
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1400
Артикул: WAG-WP1600P ,   Время доставки: 14-21 день
1014,13 € (5%)
1067,50 €

Дозатор для бумажных полотенец у с сенсором Wagner Ewar 1+1 рулон с трансформатором Н/Р сталь сатин

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1400

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts can be replaced as modules.
  • Mounting: With four screws through key holes in the back wall. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733250
highly polished 732250
(coloured) plastic powder - coating 728250
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1400
Артикул: WAG-WP1600S ,   Время доставки: 14-21 день
886,64 € (5%)
933,30 €

Дозатор для бумажных полотенец утопленный с сенсором Wagner Ewar 1 рулон на батарейках Н/Р сталь полированный

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1311

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 450 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733240
highly polished 731240
(coloured) plastic powder - coating 728240
Suggested text for specifications:

Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1311
Артикул: WAG-WP1511P ,   Время доставки: 14-21 день
904,02 € (5%)
951,60 €

Дозатор для бумажных полотенец утопленный с сенсором Wagner Ewar 1 рулон на батарейках Н/Р сталь сатин

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1311

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 450 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733240
highly polished 731240
(coloured) plastic powder - coating 728240
Suggested text for specifications:

Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1311
Артикул: WAG-WP1511S ,   Время доставки: 14-21 день
805,51 € (5%)
847,90 €

Дозатор для бумажных полотенец утопленный с сенсором Wagner Ewar 1 рулон с трансформатором Н/Р сталь полированный

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1310

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. 
  • Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 450 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733230
highly polished 732230
(coloured) plastic powder - coating 729230
Suggested text for specifications:

Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1310
Артикул: WAG-WP1510P ,   Время доставки: 14-21 день
904,02 € (5%)
951,60 €

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1310

350 x 448 x 210 mm
1 paper roll

Choose product variant

  • Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. 
  • Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 450 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 10,3
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733230
highly polished 732230
(coloured) plastic powder - coating 729230
Suggested text for specifications:

Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 448 x 210 mm

Article No. WP1310
Артикул: WAG-WP1510 ,   Время доставки: 14-21 день
805,51 € (5%)
847,90 €

Дозатор для бумажных полотенец утопленный с сенсором Wagner Ewar 1+1 рулон на батарейках Н/Р сталь полиованная

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1411

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
    Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 582 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733280
highly polished 731280
(coloured) plastic powder - coating 728280
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1411
Артикул: WAG-WP1611P ,   Время доставки: 14-21 день
1014,13 € (5%)
1067,50 €

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1411

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
    Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 582 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733280
highly polished 731280
(coloured) plastic powder - coating 728280
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1411
Артикул: WAG-WP1611 ,   Время доставки: 14-21 день
886,64 € (5%)
933,30 €

Дозатор для бумажных полотенец утопленный с сенсором Wagner Ewar 1+1 рулон на трансформаторе Н/Р сталь полированный

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1410

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site.
    TÜV/GS-tested and certified. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 582 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733270
highly polished 732270
(coloured) plastic powder - coating 728270
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1410
Артикул: WAG-WP1610P ,   Время доставки: 14-21 день
1014,13 € (5%)
1067,50 €

Дозатор для бумажных полотенец утопленный с сенсором Wagner Ewar 1+1 рулон на трансформаторе Н/Р сталь сатин

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1410

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
    Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site.
    TÜV/GS-tested and certified. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 582 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733270
highly polished 732270
(coloured) plastic powder - coating 728270
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1410
Артикул: WAG-WP1610S ,   Время доставки: 14-21 день
886,64 € (5%)
933,30 €

WP 1310/1311 COVERING FRAME 768656

for 350 x 448 mm

Артикул: WAG-768656 ,   Время доставки: 14-21 день
81,13 € (5%)
85,40 €