Категории
Uudised
Delabie valamu CANAL pesurenn 1200mm segistiavaga d22mm roostevaba teras satiin 121250 Zoom

Delabie коллективная раковина CANAL 1200mm с отверстиями под смеситель d22mm нержавеющая сталь сатин

Артикул: DE-121250
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена:
849,70 €
Kuumakse alates: 72,22 €
Кол-во: - +

Wall-mounted CANAL wash trough 
Ref. 121250

Wall-mounted wash trough for 2 posts. 
Bacteriostatic 304 stainless steel. 
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surround and fixing brackets. 
Easy to install: no joint concealers to install, lightweight wash trough. 
Drainage on the right. 
With 2 tap holes Ø 22mm.
Supplied with 1½" waste. 
Without overflow. 
Supplied with fixing brackets and fixings. 
CE marked. Complies with European standard EN 14296.
Weight: 8.8kg.
Option to add a bacteriostatic 304 stainless steel splashback (ref. 100250).

Файлы

Схожие продукты
Артикул: 461760 ,   Время доставки: 7-14 дней ,   Viimistlus:
418,75 €

Отделитель песка  Elcee 220, 3,5L, Н/Р сталь, AISI304

Инструкция:

Пескоуловитель SAND-02 Elcee 220, 3,5 литра, нержавеющая сталь, AISI304

Пескоуловитель SAND-02 Elcee 220 предназначен для фильтрации песка из воды и имеет объём 3,5 литра. Устройство изготовлено из нержавеющей стали (AISI304) и идеально подходит для установки непосредственно под раковиной или мойкой.

Установка:
Пескоуловитель легко установить прямо под раковину или мойку, используя подходящие крепежные элементы.

Использование:
Песок и грязь накапливаются в нижней чаше устройства. Для обеспечения эффективной работы устройства необходимо регулярно опустошать чашу.

Обслуживание:
Чаша крепится к корпусу устройства зажимами с двух сторон. Для очистки чаши необходимо снять её с креплений, опустошить и при необходимости очистить.

Overall dimension in mm Ø174 x 235

Inlet dimension in mm 1.5"

 Outlet dimension in mm 1.5"

Material AISI 304 

Material thickness in mm 1.5 

Gross weight in kg 2.50

Артикул: I-SAND-02 ,   Время доставки: 3-4 недель ,   Viimistlus:
476,69 €
 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

   
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 

 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Артикул: AZP-ZAC 1-20 ,   Время доставки: 3-4 недели ,   Viimistlus:
106,72 €

DRINKING SYSTEM

  • Frost-free drinking system for cattle and horses
  • Fresh and clean water for the animals all year round
  • Without wiring or electricity 
  • A minimum of maintenance
  • No concern about filling the drinking vessels
  • No concern about cleaning the drinking vessels
 
Automaatjootjad sobivad kasutamiseks nii karjamaal kui ka tallides ning nende läheduses asuvates joogikohtades.
Jootjaid on lihtne kasutada ning hobused saavad kiiresti aru, et mugavam on vee juurdevoolu avamiseks vajutada klapile
mitte nina otsaga vaid selle ülaosaga. Kui koon (mokad) on joomiseks vabad, joobki hobune loomulikul viisil vee pindmiselt
kihilt. Seetõttu olemegi valinud jooginõuks lai ja sügav kauss, et tekiks joomiseks mugav veepind.
 
Töötamise põhimõte
Tõusutoru on varustatud isetühjeneva 3-tee
ventiiliga, mis on paigaldatud kaevu, mis omakorda
on süvistatud pinnasesse.
Kui jootjat ei kasutata on veest tühi nii ventiil kui
ka tõustoru, milles olev vesi võiks muidu külmuda.
Nii jootja ventiil ja tõusutoru on külmumiskindlad nii
kaua kuni on külmumiskindel ka vee toitetorustik.
 
 
Артикул: FL-A342 ,   Время доставки: 14-21 день ,   Viimistlus:
1134,60 €

Питьевой фонтан free-standing механический Н/Р сталь AISI304

AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)

AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl

Package contents

  • stainless steel column and cone with nozzle
  • press valve
  • anchoring construction
  • flexible hose siphon
  • connecting hoses
  • anchoring material
  • Set-up water inlet - pipe G 1/2“
  • Set-up drainage d = 40 mm
  • Prepared alcove for embedding (concreting) in the base construction
Water inlet G 1/2"
Water pressure 2 – 6 Bar, recommended 3 Bar
Outlet d = 40 mm
Inner dimensions of sink d = 290 mm
Weight 20 kg
 
Артикул: AZP-AFO02 ,   Время доставки: 3-4 недели ,   Viimistlus:
1556,10 €

PEGU.ee — каждый смеситель и аксессуар для ванной отобран на основе личного опыта.Вас консультирует сантехнический эксперт Александр Гуменюк, опыт 25+ лет. info@pegu.ee · +372 515 0681