298 x 1348 x 120 mm
ca. 250 paper towels / 950 ml soap bottle / 11 l

• Combination consisting of a liquid soap dispenser, a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Liquid soap dispenser with one-hand operated and non-drip soap pump. 
• Designed for standard 950 ml disposable bottles of liquid soap or hand lotion. 
• Also refillable with large container using the plug-in tank as an option. 
• Paper towel dispenser with deep-drawn paper removal opening for easy paper removal. 
• Designed for approx. 250 standard paper towels in zigzag fold.
  Paper size (folded): 240-250 mm x 100-115 mm. 
• Inspection slots to indicate fill level. 
• Accessible for refilling through lockable front flap with fall protection. 
• Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. 
• Keyed alike cylinder locks in corrosion-resistant zinc die-casting. 
• Wear parts can be replaced as modules.
• Mounting: With eight screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material, first fill with soap and one pack of paper towels.

• Weight (in kg): 15,4

140 x 110 x 90 mm
for 1 roll, lockable

• Toilet roll holder in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel construction, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Designed for one standard toilet roll with dimensions:
  Outer diameter max. 125 mm
  Width max. 100 mm
  Core diameter min. 38 mm
• Accessible for refilling by unlocking the center axis. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With two screws through fixing holes in the back wall. 
• Delivery includes fixing material.

• Weight (in kg): 0,7

> Working pressure : 1 to 5 bar

> Flow : 3 l/min with integrated flow limiter High quality anti-limescale aerator Anti-water-hammering design

> Hydraulic supply : G 3/8" (12x17)

> Power supply : Integrated 6V CRP2 lithium battery

> Material and colour finish : Injected molded metal body and cover Chrome finishing

> Thermal resistance : Resistant to a temperature of 75°C for 30 minute thermal shocks

> Security : Temperature limiting system to avoid any risk of scalding Anti-overflow security time is set to 30 seconds Anti-blocking system preventing the water to flow continuously

> Delivered with : 1 Brass clamping nut 1 Gasket and 1 Washer 2 PEX Hoses with revolving nuts and NF check valves 2 MM G 3/8" (12x17) Stop valves 2 Filter gaskets 1 Self-adhesive sticker Instruction manual

> Standards & approvals : Molded chrome-plated body in accordance with EN 12540 Brass in accordance with NF EN1982, EN12164, EN12165 200-hour neutral salt spray resistant (NSS) in accordance with NF ISO 9227

ARKI+ ® handle 352mm. H2520. Available in 4 finishes.