Категории
Koristajavalamu R/V teras 455x330, pritsmisplekiga+ämberrestiga SANELA SLVN 01 Zoom

Нержавеющая подвесная раковина 455x330 , Н/Р сталь

Артикул: SA-SLVN-01
Бренд:
Единица: шт
Время доставки: 3-5 недель
Цена:
645,41 €
Kuumakse alates: 54,86 €
Кол-во: - +

Нержавеющая подвесная раковина 455x330 , Н/Р сталь

Stainless steel floor standing bulk sink, 700x700x850 mm

 

Characteristics

  • stainless steel bulk sink with supporting legs with a sheating
  • without a tap hole (could be made to order)
  • possibility of fine plane regulation by the regulation screws on the supporting legs
  • available also in dimensions 600 x 600 x 850 mm
  • material CrNi 18/10 (AISI-304)
  • brushed finish
  • different dimensions could be made to order
Order number 93150
Code SLUN 15
Схожие продукты

MORA незамерзающий садовый кран 400мм, с ключом 461400

PROPERTIES

  • Self-draining
  • Key included
  • With approved non-return valve
  • Can be cut to suit wall thickness
  • Wall bracket: H=110 mm, W=60 mm
Артикул: 461400 ,   Время доставки: 7-14 дней ,   Viimistlus:
150,00 €

Aзия WC нержавеющая сталь Portinox PT

Aasia WC, R/V teras AISI 304

Артикул: PPT ,   Время доставки: 7-21 дней ,   Viimistlus:
558,00 €

Отделитель песка  Elcee 220, 3,5L, Н/Р сталь, AISI304

Инструкция:

Пескоуловитель SAND-02 Elcee 220, 3,5 литра, нержавеющая сталь, AISI304

Пескоуловитель SAND-02 Elcee 220 предназначен для фильтрации песка из воды и имеет объём 3,5 литра. Устройство изготовлено из нержавеющей стали (AISI304) и идеально подходит для установки непосредственно под раковиной или мойкой.

Установка:
Пескоуловитель легко установить прямо под раковину или мойку, используя подходящие крепежные элементы.

Использование:
Песок и грязь накапливаются в нижней чаше устройства. Для обеспечения эффективной работы устройства необходимо регулярно опустошать чашу.

Обслуживание:
Чаша крепится к корпусу устройства зажимами с двух сторон. Для очистки чаши необходимо снять её с креплений, опустошить и при необходимости очистить.

Overall dimension in mm Ø174 x 235

Inlet dimension in mm 1.5"

 Outlet dimension in mm 1.5"

Material AISI 304 

Material thickness in mm 1.5 

Gross weight in kg 2.50

Артикул: I-SAND-02 ,   Время доставки: 3-4 недель ,   Viimistlus:
475,00 €

AUM 026 INV is a stainless steel, partly wall-built in washbasin, containing the combination of a liquid soap dispenser, water tap and hand dryer in a small space. The washbasin is adjusted to be used also by wheelchair persons – it is shallow, completed with handles, the waste is hidden behind the wall. Controlled by durable piezo-pushbuttons, electronically controlled turn-off (the period of water running is settable by the owner). The washbasin is to be mounted through the wall, all technology components are behind the wall, and thus cannot be damaged by users (anti-vandal design).

A wall-hanged version may be supplied to order, or a version without any of the functions (e.g. onlz water plus soap, or water plus dryer). The washbasin is made of AISI 304 stainless steel. A recommended cleaning agent for stainless products maintenance: Würth – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).

Basic technical information
Power supply: 230 V, 50 Hz
IP protection: IP 55
Dimensions (visible from outside): 800 x 800 x 363 mm
Required thickness of wall: min. 100 mm
Outlet: d = 40 mm
 
Requirements for setting up the construction
  1. Opening in the wal 740 x 740 mm
  2. Prepared el. supply cable 3C x 1,5 s 230 V, 50 Hz
  3. Prepared water outlet according to technical scheme
 
 
Complete delivery
  • Stainless-steel washbasin with handles
  • Electronic hand dryer
  • Electronic soap dispenser
  • Electronic water tap
  • Through-wall frame with bolts
  • Waste with a stink trap
  • 230V / 12V source for the electronics
 
Артикул: AZP-AUM 026.TV INV ,   Время доставки: 3-4 недели ,   Viimistlus:
4370,49 €

Питьевой фонтан напольный/настенный с наполнителем для бутылки ,механический Н/Р сталь AISI304

AFO 01.SL

drinking fountain with spout for filling bottles designed to stand and to be attached to wall

AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.

In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order. 

Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting. 

TAutomatic drinking fountain (with a sensor) can be supplied per order.

AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

Package contents

  • Stainless housing with cone
  • Pressure valve with jet
  • Pressure valve for bottle filling
  • Flexible hose outflow
  • Fixing and connecting material
dimensions 330 x 900 x 365 mm
water outlet d = 40 mm
water inlet G 1/2"
water pressure 2 - 6 Bar, recommended 3 Bar
weight 12 kg

 

  • Set up water outlet d = 40 mm
  • Set up water inlet G 1/2"

 

Артикул: AZP-AFO01.SL ,   Время доставки: 3-4 недели ,   Viimistlus:
1948,43 €

PEGU.ee — каждый смеситель и аксессуар для ванной отобран на основе личного опыта.Вас консультирует сантехнический эксперт Александр Гуменюк, опыт 25+ лет. info@pegu.ee · +372 515 0681

Вам у нас понравилось? 

Ваш отзыв очень важен для нас! Оставьте комментарий в Google и помогите нам стать лучше.

https://g.page/r/CfpgmqT62C5fEBM/review

Pegu Google hinnang