душевая панель со смесителем Presto DL 800S с подставкой для мыла 60 sek
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee
Единица: шт
Время доставки: 14-21 день
✅ На PEGU.ee мы выбираем то, что действительно приятно иметь дома.
Умные решения, красивый дизайн, проверенное качество.
Покупая у нас, вы выбираете уверенность и спокойствие.
Dušipaneel segistiga Presto DL 800S seebialusega
Range : Timed flow mixer tap for shower
Ref : 27812 - PRESTO DL 800 S®
> Working pressure :
1 to 5 bar
> Flow :
6 l/min with integrated flow limiter Anti-water-hammering design
Fixed shower head with anti-limescale spikes
> Flow time :
60 seconds (Adjustable from 40 to 60 s) Start/Stop function
> Hydraulic supply :
G 1/2" (15x21) rear water inlet
With self-closing tap EN 816 and thermostatic mixing valve EN 1111 (Check valves NF)
> Material :
9001 RAL white ABSPC thermoformed resin
Brass body and components with molded chrome treatement
> Thermal resistance :
Resistant to a temperature of 75°C for 30 minute thermal shock
> Security :
Anti-scald system: flow is immediately stopped if the cold water is cut off
> Delivered with :
1/2" hoses with revolving nuts
MM G 1/2" (15x21) Stop valves and filters (250 micron) Soap dish
Fastening screw
Instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
Сердечник
ALPA
Presto
kroom
30 sek. töötsükkel 3 bar
1/2" väliskeere
> Working pressure : 1 to 5 bar
> Flow : 6 l/min with integrated flow limiter Anti-water-hammering device Hand-held shower on rail with chrome plated slide
> Flow time : 30 seconds (± 5 sec.)
> Hydraulic supply : G 1/2"(15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026. On P 50 tap NF II and thermostatic mixer tap EN 1111 (NF check valves)
> Material : Anodised aluminum profile (2.5mm thickness) Aluminum removable valve plate, peinted RAL 7005 High resistance RAL 7005 coloured ABS casings
> Functioning: Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance : Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security : Anti-scald system: flow is immediately stopped if the cold water is cut off Maximum delivered temperature : pre-fixed at 38°
> Delivered with : 1/2" hoses with revolving nuts MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screw and instruction manual > Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure : 1 to 5 bar
> Flow : 3 l/min with integrated flow limiter High quality anti-limescale aerator Anti-water-hammering design
> Hydraulic supply : G 3/8" (12x17)
> Power supply : Integrated 6V CRP2 lithium battery
> Material and colour finish : Injected molded metal body and cover Chrome finishing
> Thermal resistance : Resistant to a temperature of 75°C for 30 minute thermal shocks
> Security : Temperature limiting system to avoid any risk of scalding Anti-overflow security time is set to 30 seconds Anti-blocking system preventing the water to flow continuously
> Delivered with : 1 Brass clamping nut 1 Gasket and 1 Washer 2 PEX Hoses with revolving nuts and NF check valves 2 MM G 3/8" (12x17) Stop valves 2 Filter gaskets 1 Self-adhesive sticker Instruction manual
> Standards & approvals : Molded chrome-plated body in accordance with EN 12540 Brass in accordance with NF EN1982, EN12164, EN12165 200-hour neutral salt spray resistant (NSS) in accordance with NF ISO 9227
> Working pressure :
1 to 5 bar
> Flow :
1.9 l/min with integrated flow limiter sprayer High quality anti-limescale aerator Anti-water-hammering device
> Hydraulic supply :
G 3/8" (12x17)
> Power supply :
Integrated 6V CRP2 lithium battery in a waterproof case, located inside the tap body.
> Material and colour finish :
Injected molded metal body Chrome plated cover
> Thermal resistance :
Resistant to a temperature of 75°C for 30 minute thermal shocks
> Security :
Maximal limited temperature by ajustable temperature limitor device
The solenoid valve will be closed automatically in case of over flow (>30 seconds), low battery or any damage of detector Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with :
1 Brass clamping nut
1 Gasket and 1 Washer
2 PEX Hoses with revolving nuts and NF check valves 2 Filter gaskets
1 Self-adhesive sticker
Instruction manual
> Standards & approvals :
Brass in accordance with EN1982, EN12164, EN12165
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
