Seinale klapitav mähkimislaud; horisontaalne, ioniseerijaga;

materjal-polüpropüleen / AISI 304, roostevaba teras-harjatud; 

kaal 12,3 kg; 

mõõdud: L 860 x S 570 x H 100 (klapituna seinale 565) mm

HORIZONTAL BABY CHANGING STATION MADE OF POLYPROPYLENE AND STAINLESS STEEL SATIN FINISH, WITH AN IONIZER

Horizontal surface-mounted baby changing station made of bacterial-resistant polypropylene and with AISI 304 stainless steel exterior, satin finish. It also assembles an ionizer that eliminate microorganisms such as viruses, bacteria, fungi, etc.

• Horizontal wall-mounted baby changing station made of white polypropylene and AISI 304 stainless steel satin finish, with built-in antibacterial additive and an ionizer that eliminate microorganisms such as viruses, bacteria, fungi, etc.

• BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability.

• Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly.

• Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes.

• This model of baby changing station is supplied with an ionizer ("Ion Hygienic" technology) ) that neutralizes virus and bacteria thanks to the negatively charged particles (anions) it emits, helping to maintain the baby changing station free of these harmful microorganisms for the baby health. The effectiveness of the ionizer, against virus and bacteria, has been tested and approved by TÜV Rheinland (Microbiological Test Report number 60329708-001) .

• BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon.

• A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand.

• BabyMedi® units fully comply with the EN 12221-1 and EN 12221-2 standards that require baby changing stations be able to support a 50 Kg static load test during one hour. Moreover, units tested in our own laboratories have withstood loads over 100 kg.

•   Circular toilet paper dispenser for 3 standard rolls or 1 industrial roll max. Ø 275 mm (shaft for 1 paper roll code 93910055MD must be ordered additionally), surface mounted, with a stylish design suitable for every washroom.

•   Manual dispensing.

•   Robust and vandal-proof.

•   Suitable for very high traffic facilities.

•   Model suitable for public use with high strength and durability.

•   Slot at the front with a plastic viewer that indicates the content level.

  Materials and components

•   BODY: 0.8 mm thick, round Ø 300 mm, fully sealed and with a catch system to prevent the opening of the door. The supports of the screws in the back of the appliance, are acting as an anti-moisture support, as well as slots to avoid the screws damaging the toilet paper. It is mounted on the wall by means of 3 wood screws with their corresponding 5 mm wall plugs. It includes a lock system with standard mediclinics® key, that allows opening the lid for replenishment.

•   SHAFT: for 3 standard paper rolls (roll tube Min. Ø 12 mm) or optional plastic shaft for 1 industrial roll (roll tube Min. Ø45 mm), both of them are removal and with inertial anti-spin retainer.

•   LID: one-piece seamless, 0.8 mm thick, fully sealed. Fixed to the body by means of rivets that allow swinging down the lid for the replenishment.

•   BACK PLATE: 0.6 mm thick, with multiple slots for easy installation. Total compatible with PR0787... series.