Слив с функцией осаждения песка 7070T Kavika без ножек 480х330х120 мм
Бренд:
Единица: шт
Время доставки: 14-21 день
Попробуй промокод PEGU-KEVAD! Выбери товар по полной цене, добавь в корзину, и введи код купона при покупке! Время работы промокода ограничено!
Liivaeraldusnou Kavika jalgadel 480х330х120 мм
Liiva settimise funktsiooniga drenaažid 7070
Сливы с функцией осаждения песка 7070
Назначение данного слива – препятствовать попаданию песка в канализационную систему. Данный слив устанавливают в моечных помещениях рядом с моечной раковиной, также через слив 7070 пропускают сточный шланг от стиральной машины.
Внутренняя, съемная часть слива служит для осаждения песка и грязи, она легко отделяется и моется. Вода поступает в слив через шланг, устанавливаемый в отверстие крышки слива. Отвод воды осуществляется через сливной патрубок DN32, который присоединяется к канализационному трапу.
Внешние размеры 480х330х120 мм Внутренние размеры 300х280х115 мм
Слив с функцией осаждения песка 7070 изготавливается с ровным плоским дном, что даёт возможность устанавливать его на нижнюю полку стола-мойки, под раковину.
Сливы с функцией осаждения песка 7070/T
Слив с функцией осаждения песка 7070/Т оснащается металлическими ножками, в остальном конструкция аналогична вышеописанной. Ножки имеют регулируемые по высоте опоры, благодаря чему Слив легко устанавливается на неровном полу.
Sand separator basin 7070
The sand separator basin is intended for preventing sand from entering the sewer network. Sand separator basins are used in cleaning cupboards in connection with washbasins.
The detachable inner basin serves as the actual separator basin that is easy to empty.
The supply water pipe is led into the basin through the hole in the cover, and the discharge pipe, DN32, is connected to the floor drain.
Outer dimensions 480x330x120 mm
Inner basin 300x280x115 mm
The sand separator basin 7070 comes with a flat bottom, which makes it possible to place it on the washstand’s lower shelf below the sink.
Sand separator basin 7070/T
The sand separator basin 7070/T is equipped with low legs; in other respects the structure is similar to the model described above. The leg adjustment pads make it easy to place the sand separator basin in a room with a sloping floor.
Питьевой фонтан Portinox FP-002 крепление к стене, до пола Н/Р сталь
Коллективная Н/Р сталь раковина Intra P180V 1800мм, с консолями
Pesurenn konsoolidega 1800mm
Антивандальный унитаз INVA Н/Р сталь
AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.
The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.
It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.
|
Complete delivery | |
|
REDO wall-mounted washbasin
Ref. 121710
Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With central tap hole Ø 35mm.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
TECHNICAL FEATURES
REDO wall-mounted washbasin
Ref. 121710
Height | 150mm |
---|---|
Length | 375mm |
Width | 430mm |
Thickness | 1.2mm |
Finish | 304 polished satin stainless steel |
Питьевой фонтан напольный/настенный механический Н/Р сталь AISI304
AFO 01.S
stainless steel drinking fountain with pressure valve designed to stand and to be attached to wall
AFO 01.S is a drinking fountain of stainless steel with pressure valve designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.S is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Pressure valve with jet
- Flexible hose outflow
- Fixing and connecting material
dimensions | 330 x 900 x 365 mm |
outlet | d = 40 mm |
water inlet | G 1/2" |
water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
weight | 12 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"