Электрический рукосушитель встраеваемый ADA Compliant, QuietDry 230М
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee
Единица: шт
Время доставки: 5-6 недель
Продавец: PEGU OÜ
Электрический рукосушитель встраеваемый ADA Compliant, QuietDry 230М
| Width | 11 13/16 Inches |
| Depth | 6 Inches |
| Height | 24 1/16 Inches |
| Opening Width | 10 Inches |
| Opening Depth | 6 Inches |
| Opening Height | 9 7/8 Inches |
| Amps | 4 - 4.4 Amps |
| Hertz | 50 - 60 |
| Phase | 1 |
| Voltage | 208 - 240 Volts |
| Wattage | 1,000 Watts |
| ADA Compliant | Yes |
| Drying Time | 17 Seconds |
| Finish | Stainless Steel |
| Hands Free | Yes |
| Installation Type | Built-In |
| RPM | 8,000 |
| Style | Heated |
Süvistatav prügikast
süvistussügavus 150mm
Diameeter 380mm
Mahtuvus 2,5l/20-30 lehte
Koti mõõt 39x28CM
Nähtav osa :
Rõngas :poleeritud kroom, naturaalne messing.
harjatud kroom, harjatud R/V teras või 14 rinevat
värvitooni.
Mahuti materjal :värvitud PC/ABS
RS1/B Must Mahuti
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga B-klass harjadega mootor
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 4,8A
Kaal 1,2kg
Koguvõimsus 1110W
Eeldav kuivatusaeg 39 sek
Sensori komplekti on vaja vahetada kui masin töötab , kas koguaeg, või ei tööta üldse.
FOAM SOAP DISPENSER WP 208-5
148 x 448 x 120 mm
400 ml foam soap concentrate
- Foam soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - One-hand operated and non-drip foam soap pump.
- Designed for standard 400 ml foam soap concentrate.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, removable front panel with fall protection.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panel can be replaced as modules.
- Installation dimensions: 150 x 450 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with soap.
- Weight (in kg): 3,4
PAPER TOWEL DISPENSER WP 112
298 x 448 x 120 mm
ca. 500 paper towels
- Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - With deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm. - Inspection slot to indicate fill level.
- Accessible for refilling through lockable front flap with fall protection.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Installation dimensions: 300 x 450 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 4,8
