Категории

Бренды

Скидки и акции

Soodus

Комбинированный утопленный дозатор для бумажных полотенец на 250 шт, урна 32L Н/Р сталь полированный

Артикул: WAG-WP5010P , Время доставки: 14-21 день

COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 5010

298 x 1048 x 220 mm
ca. 250 paper towels / 32 l

Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below.
Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
Designed for approx. 250 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket. Capacity approx. 32 l. Accessible through lockable door.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 300 x 1050 x 210 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material and one pack of paper towels.

Weight (in kg): 13,4

AVAILABLE SURFACES	ORDER NUMBERS
satin finished (standard)	727528
highly polished	731528
(coloured) plastic powder - coating	729528

Suggested text for specifications:

Combination consisting of a paper towel dispenser and a waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Paper towel dispenser with deep-drawn paper removal opening, filling quantity approx. 250 paper towels. Inspection slot to indicate fill level. Accessible for refilling through lockable front flap with fall protection. Waste bin equipped with removable mesh basket. Capacity approx. 32 l. Accessible through lockable door. Keyed alike cylinder locks in corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack of paper towels.

Dimensions: 298 x 1048 x 220 mm

Article No. WP5010

1054,50 € (-5%) 1110,00 €

Soodus

Качель Дуб серый

Артикул: TT-Kiik Tamm Hall , Время доставки: 3-7 дней

Цельно деревянная качель, подходит для наружного использования.

Тема дизайна - Скандинавская мебель шестидесятых-семидесятых годов.

Все деревянные части из дуба и покрыты облицовочной восковой смесью.

PPM плетёный шнур , в комплекте две металлические направляющие и четыре деревянных стопора.

Высоту очень просто отрегулировать. Качели подходят и для взрослых.

Шнур серого цвета. При желании использовать другой цвет можно спросить предложение.

Размер 50 x 18 cm.

Качели подходят для помещения высотой до 2,5 m. для более высоких помещений расчет 5 евро на метр.

156,75 € (-5%) 165,00 €

Soodus

Керамический писсуар Roca Zoom с радаром Sanela, с интегрированным источником питания 230V/ AC

Артикул: SA-SLP35RZ , Время доставки: 14-21 день

SLP 35RZ

Urinal Roca Zoom with a radar flushing unit and integrated power supply, 230 V AC

Characteristics

economy flushing by 1 liter of water
easy installation by the help of paper drill template
whole flushing unit is placed behind the urinal
system reacts only on the direct use of the urinal (it analyses changes, which are proceeded inside of the urinal, when a liquid is flowing through)
adjustable flushing time 0,5 - 15,5 s
parameters adjustment by remote control SLD 04 without the necessity to dismantle the urinal from the wall (acoustic setting indication)
automatic flushing after each 6 hours non-use
possibility to regulate a water flow by the ball valve
radar flushing unit recharges a water to the siphon after each flushing

Code	SLP 35RZ
Order number	01355

Supply specification

SLP 35RZ - Supply No. 01355 - ceramic urinal with the radar flushing unit on the mounting rail, electromagnetic valve, connecting hoses, angle valve with filter and check valve, inlet fitting with a rubber sealing, siphon, paper drill template, power supply

Technical information

Operating voltage: 230 V AC/50 Hz
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 1/2“
Water outlet: inlet fitting with a rubber sealing

695,40 € (-5%) 732,00 €

Soodus

WC держатель туалетной бумаги BJÖRK 1 JUMBO+1 стандартный рулон белый

Артикул: DAN3350 , Время доставки: 14-21 день

BJÖRK - THE ELEGANT RESTROOM EQUIPMENT

Harmonisation is one of the key words behind the BJÖRK range of toilet equipment. Not only are the products well thought out and extremely functional, they also impress with a design that goes far beyond familiar forms. BJÖRK is a breakthrough in commercial bathroom products and the design has already been recognized worldwide. Since the hand dryer was launched and awarded a RedDot Award in 2015 the collection has been increased by a number of products. In particular, the diaper changing station has caught eye of the experts and has won several international design awards for design excellence and design innovation.

BENEFITS - BJÖRK JUMBO TOILET ROLL HOLDER

Capacity: 1 Jumbo and 1 standard roll
Ideal for high-traffic restrooms
A window on the front allows you to monitor the fill level
Features lock to help prevent tampering and vandalism
2-year warranty

SPECIFICATIONS
Product number:	3350 / EAN nr. 5-709818-033501
Technical data:	Toilet roll holder in powder coated stainless steel. Capacitet: 1 Jumbo roll + 1 standard roll.
Dimensions	H: 470 mm x W: 455 mm x D: 171,5 mm
Weight:	9.5 kg
Colour:	White RAL 9003 Gloss 60

691,60 € (-5%) 728,00 €

Soodus

Wagner Ewar дозатор для пены 400ml бутылка с установкой за зеркало сатин

Артикул: WAG-WP174-5 , Время доставки: 14-21 день

FOAM SOAP DISPENSER FOR MOUNTING BEHIND WALL MIRROR WP 174-5

69 x 250 x 127 mm
400 ml foam soap concentrate

Choose product variant

Foam soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
One-hand operated and non-drip foam soap pump.
Designed for standard 400 ml foam soap concentrate. Accessible for refilling through spring stop pin and by removing from below.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
Depth of substructure installation: min. 160 mm
Height above vanity unit: min. 250 mm
Delivery includes fixing material, self-adhesive information label „Soap“ and first fill with foam soap concentrate.

Weight (in kg): 1,5

AVAILABLE SURFACES	ORDER NUMBERS
satin finished (standard)	727048

Suggested text for specifications:

Foam soap dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. One-hand operated and non-drip foam soap pump. Designed for standard 400 ml foam soap concentrate. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, self-adhesive information label Soap and first fill with foam soap concentrate.

Dimensions: 69 x 250 x 127 mm

Article No. WP174-5

242,25 € (-5%) 255,00 €

больше

Uudised