Категории
jpg_160250_1.jpg Zoom

Delabie антивандальная раковина PMR XS TC нержавеющая сталь сатин

Артикул: DE-160250
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена:
709,00 €
Kuumakse alates: 60,27 €
Кол-во: - +
   - или -   

PMR XS TC wall-mounted washbasin 
Ref. 160250

Wall-mounted washbasin, cross wall installation for service ducts. 
Basin internal diameter: 310mm. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.2mm. 
Rounded edges prevent injury. 
Vandal-resistant: shrouded basin. 
200mm threaded rod can be cut to size (other lengths available on request.
Without overflow. 
Supplied with fixing elements. 
CE marked. Complies with European standardEN 14688. 
Weight: 4.5kg. 

 

TECHNICAL FEATURES 

PMR XS TC wall-mounted washbasin 
Ref. 160250

Height 130mm
Length 390mm
Width 400mm
Thickness 1.2mm
Finish 304 polished satin stainless steel

Файлы

Схожие продукты
Антивандальный унитаз Н/Р сталь
 
 

AUZ 08

stainless-steel standing closet, with hardened seat, back drain

   
 
 
 

AUZ 08 is a stainless-steel WC in matt design. To increase the user comfort, it is provided with a grey seat with a lid made of hardened plastic (newly also with a seat in black design AUZ 08.CS). AUZ 08 is designed to stand on the floor at the wall; it is suitable for places where the common closet cannot be attached to the wall, because of a thin bearing particle, for example. The standard version of AUZ 08 has a back drain (the version with the bottom drain AUZ 02). It is suitable to supplement the WC with the automatic pressure water flushing device AUZ 3, automatic flushing device with the piezo button AUZ 3.P (or the vandal-resistant flushing device BSAZ 01) or any flushing device with a cistern.

 

Thanks to its resistance to damage, the closet is primarily intended for social facilities with demanding operation, such as highway lay-byes, alehouses, etc., where easy maintenance of sanitary conditions is required. WC is also manufactured in the design for the disabled under the designation AUZ 08 INV

 

Further closet versions can be found in the section Stainless-steel closets or Stainless-steel safety closets.

 

 
Basic technical information
Water inlet: d= 34-50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 23 kg
 
 
Requirements for setting up the construction
  1. Set-up outlet d = 110 mm including rubber sleeve for pipe d = 90 mm.
  2. Set-up water inlet d= 34-50 mm according to chosen sealing.
 
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
 
 
Made to order
  • AUZ 3 - automatic pressure flushing system
  • AUZ 3.P - automatic pressure flushing system with piezo control
  • BSAZ 01 - vandal resistant pressure flushing system
 
Артикул: AZP-AUZ 08 ,   Время доставки: 3-4 недели
2452,00 €

CANAL wall-mounted wash trough 
Ref. 120300

Wall-mounted wash trough for 4 posts - 2,400mm 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets. 
Easy to install: no joint concealers to install, light wash trough. 
Drainage on the right. 
With no tap hole. 
Supplied with 1 ½" waste. 
Without overflow. 
Supplied with brackets and fixing elements. 
CE marked. Complies with European standard EN 14296. 
Weight: 20kg. 
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007). 

 

Height 250mm
Length 2400mm
Width 400mm
Thickness 1mm (basin) et 1.5mm (edge and fixing brackets)
Finish 304 polished satin stainless steel
Артикул: DE-120300 ,   Время доставки: 14-21 день
1239,00 €

Раковина из нержавеющей стали KEG

Characteristics

  • stainless steel counter top washbasin
  • assembling by screws
  • material AISI - 304
  • brushed finish
Артикул: SA-SLUN77 ,   Время доставки: 14-21 день
854,00 €

DESCRIPTION

Countertop ALGUI washbasin 
Ref. 120110

Countertop washbasin, Ø 375mm. 
Suitable for use with wall-mounted or extended mixer/tap.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Polished satin finish. 
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼" waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 3.8kg.

Артикул: DE-120110 ,   Время доставки: 14-21 день
719,00 €

Floor-standing XL P disposal sink 
Ref. 182070

Floor-standing disposal sink. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.5mm. 
Smooth surface is easy to clean. 
Concealed perimetral flushing system. 
Horizontal or vertical water inlet: Ø 55mm. 
Horizontal or vertical water outlet: Ø 100mm. 
Supplied with PVC pipe. 
Concealed drainage: shrouded sink. 
Quick and easy to install: 2 access panels 
with theft prevention TORX security screws. 
Hinged stainless steel bucket grid. 
Weight: 16kg. 

 

 

TECHNICAL FEATURES 

Floor-standing XL P disposal sink 
Ref. 182070

Height 450mm
Length 445mm
Width 410mm
Thickness 1.5mm
Finish 304 polished satin stainless steel
Артикул: DE-182070 ,   Время доставки: 14-21 день
2147,00 €