S&Uuml;VISTATUD Silhouet HS 1 S&uuml;vistatud du&scaron;is&uuml;steem&nbsp;

Кран с сенсором Sanela Н/Р сталь холодная/смешанная вода

Characteristics

economical aerator, rate of flow 6 l/min
function of automatic water stop after 5 minutes of continuous flow
water is flowing as long as hands are in the active range (max. range to 0,3 m)
water stops flowing after removal of hands from the active range of sensor after adjustable time delay from 0,25 to 7,75 sec
possibility of changing of time delay, active range and switching off by SLD 03
SLU 45 is destined for cold or premixed water under the washbasin
START/STOP program

Артикул: SA-SLU 45, 24V DC , Время доставки: 14 дней

575,00 €

Самозапорный смеситель NEO 15 sek

Töötsükkel 15 sek

Артикул: P68400 , Время доставки: 14 дней

306,85 € (5%)
323,00 €

Дозатор для мыла бесконтактный BJÖRK, чёрный-OSLO верх

PRODUCT DESCRIPTION

• Winner of a Red Dot Design Award!

• Holds approx. 9,5 dl liquid soap (= 800-950 doses).

• Battery-operated. Connection to power supply via a transformer.

• An intelligent sensor automatically sets the best sensor range.

• LED light indicates when dispenser is in use.

• Comes in trendy matt black and classic white as standard.

• Also available in all RAL colours and coated with different prints.

• Top plate in 6 optional standard designs.

• 2-year warranty.

SPECIFICATIONS
Product number:	3056 / EAN no. 5-709818-030562
Technical data:	Touch-free soap dispenser for liquid soap/disinfectant. Matt black steel housing (RAL 9005, gloss 3). Equipped with top plate. Capacity: 9,5 dl. Battery-operated.
Dimensions	H: 330 mm, W: 139 mm, D: 127 mm
Net Weight:	2.3 kg

Артикул: DAN3056 00 , Время доставки: 14-21 день

490,00 €

Антивандалльная душевая пьезо кнопка Н/Р сталь, для смешанной воды, без адаптора

	AUS 11 Pressure button-controlled shower for heat regulated water

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage.

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth.

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet.

Electronics can work in two modes:

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time.

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting.

Basic technical information
Water input:	G 1/2“
Water pressure:	1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow:	10 s – 42,5 min in mode 1
	0 s - 42,5 min in mode 2
Power supply:	12 V, 50 Hz
Power requirement:	6 VA
Source of power supplz:	ZAC 1/20 (max. 3× AUS 11)
	ZAC 1/50 (max. 8× AUS 11)
Weight:	2,0 kg

Requirements for setting up the construction
Water installation set up as per picture Set-up alcove 150 x 75 mm for installation casket Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC

Complete delivery
installation casket input and output bolting electromagnetic valve spherical valve covering metal plate with piezo button electronics

Made to order
SP 1 – shower arm with water flow of 9 l/min SP 2 – shower arm with water flow of 7 l/min SP 3 – shower arm with water flow of 7 l/min ZAC - source of power supply 12V, 50Hz

Figure

A -	water inlet G 1/2"
C -	electricity supply cable 12 V, 50 Hz
G -	water outlet into shower armG 1/2"

Download information about the product
AUS 11 data for projectants - ( 84 kB )

Артикул: AZP-AUS 11 , Время доставки: 3-4 недели

375,00 €

Антивандальная душевая головка 12l/min

	SP 5 tilting shower head - 12 l/min - VANDAL-RESISTANT

Design vandal-resistant arm with the flow of 12 litres / minute. The arm has a tilting outlet and an aerator protected against scaling. The arm is protected against theft with a countersunk Allen screw; therefore, it cannot be dismounted without a tool.

Артикул: AZP-SP5 , Время доставки: 3-4 недели

152,00 €