Delabie хирургическая раковина на три места с высокой задней стенкой. RST AISI 304 L 2100mm
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee
Единица: шт
Время доставки: 3-4 недели
Продавец: PEGU OÜ
Delabie хирургическая раковина на три места с высокой задней стенкой. RST AISI 304 L 2100mm
Surgical scrub up trough with high splashback
Ref. 183000
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
L. 2,100mm, 3 services. With no tap hole.
Smooth surface and rounded inside edges for easy cleaning.
Drainage on the right. Without overflow. Supplied with fixing elements.
CE marked. Complies with norm EN 14296.
Weight: 34.9kg.
TECHNICAL CHARACTERISTICS
Surgical scrub up trough with high splashback
Ref. 183000| Height | 725mm |
| Length | 2100mm |
| Width | 520mm |
| Thickness | 1.2mm |
| Finish | 304 polished satin stainless steel |
CANAL wall-mounted wash trough
Ref. 120300
Wall-mounted wash trough for 4 posts - 2,400mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 20kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007).
| Height | 250mm |
|---|---|
| Length | 2400mm |
| Width | 400mm |
| Thickness | 1mm (basin) et 1.5mm (edge and fixing brackets) |
| Finish | 304 polished satin stainless steel |
CANAL wall-mounted wash trough
Ref. 120280
Wall-mounted wash trough for 3-4 posts - L. 1,800mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surround and fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 15.5kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800005).
Splashback 1800mm for CANAL wash trough
Ref. 100280
Splashback for CANAL wash trough.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Length: 1,800mm.
DUO S TC R washbasin
Ref. 160360
Wall-mounted washbasin with through-the-wall installation for service ducts.
Integrated countertop.
Basin on the right.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths are available on request).
Recessed horizontal waste outlet Ø 1".
Flat perforated waste, without screws:easy cleaning and vandal-resistant.
Without overflow. Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 8.5kg.
Floor-standing XL P disposal sink
Ref. 182070
Floor-standing disposal sink.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm.
Smooth surface is easy to clean.
Concealed perimetral flushing system.
Horizontal or vertical water inlet: Ø 55mm.
Horizontal or vertical water outlet: Ø 100mm.
Supplied with PVC pipe.
Concealed drainage: shrouded sink.
Quick and easy to install: 2 access panels
with theft prevention TORX security screws.
Hinged stainless steel bucket grid.
Weight: 16kg.
TECHNICAL FEATURES
Floor-standing XL P disposal sink
Ref. 182070
| Height | 450mm |
|---|---|
| Length | 445mm |
| Width | 410mm |
| Thickness | 1.5mm |
| Finish | 304 polished satin stainless steel |
