Delabie коллективная раковина 700mm нержавеющая сталь сатин AISI304
Бренд:
Единица: шт
Время доставки: 14-21 день
инфо e-mail : info@pegu.ee 
SUVI261 код скидки ввести в поле купона при оформлении покупки!
Surgical scrub-up trough with low upstand
Ref. 185020
Wall-mounted surgical scrub-up trough with 75mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 700mm, 1 service. Without tap hole.
Smooth surface for easy cleaning.
"Hygiene+": reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 15.6kg.
Файлы
Pissuaari renn 1800 mm
1146,00 €
DESCRIPTION
TEMPOFIX 3 self-supporting frame system for WCs
Ref. 547005-546412
Self-supporting frame system W. 350mm for wall-hung electronic WC:
Black powder-coated steel frame.
Fixes to load-bearing floors.
Frame height can be adjusted from 0 - 200mm (with 1m mark).
Ø 32mm flush tube with Ø 55mm connection washer.
ABS soil pipe with HDPE sleeve connectors, Ø 110mm outlet with waterproof seal, with 2 setting positions.
Delivered pre-mounted.
Complies with French standard NF D12-208.
Compatible with solid walls from 26 - 130mm.
Fitted with TEMPOMATIC F1" electronic direct flush valve:
Stainless steel wall plate 320 x 220mm.
Shock-resistant infrared presence detection sensor.
Voluntary activation flush when user's hand approaches the sensor or automatically when the user leaves.
Time flow ~7 seconds can be adjusted 3 - 12 seconds.
230/12V transformer.
Integrated stopcock and flow rate adjuster.
Detection distance can be adjusted by the installer.
1563,00 €
automatic washing system for wellingtons with jets - 12V, 50Hz
| Radius of sensor | 0 – 0,4 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,3 – 1,0 MPa |
| Outlet | d = 32 mm |
| Inner dimensions of the trough | 250 x 400 x 280 mm |
| Electricity protection | IP 55 |
| Power supply | 12 V, 50 Hz |
| Power requirement | 10 VA |
| Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
| ZAC 1/50 (max. 5 x AMO 01) | |
| Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
AFO 01.Yst. steel sensor controlled drinking fountain
AFO 01.Y is st. stainless wall hung drinking fountain controlled by sensor. Water runs after disrupting the scanning zone.
Fountain is made by welding all components together.
Fountain is suppplied with safety power 12 V, 50 Hz from power supply ZAC (AFO 01.Y) or with 4x AA battery (AFO 01.YB).
Material is standardly st. steel AISI 304 or can be AISI 316 (AFO 01.Y.CL or AFO 01.YB.CL).
St. steel driking fountain AFO 01.Y is based on favourite model AFO 01 with manual control.
The sensor, located on the right side of the fountain, is reacting on the approach of the user. Water starts to run from the nozzle, located in the middle of the fountain bowl, and runs over the time when the user´s head is in the scanning zone (max. 30 sec.) + preset time (max. 4 sec.) to clean the nozzle.
Package contents
- st. steel drinking fountain
- nozzle
- sensor and electronic
- electromagnetic valve
- connecting flexible hose
- corner valve with filters
- siphon
- mounting material
| water inlet | G 1/2" |
| water pressure | 1 - 10 Bar (AFO 01.Y; AFO 01.Y.CL) |
| 2 - 8 Bar (AFO 01.YB; AFO 01.YB.CL) | |
| outlet | d = 40 mm |
| bowl inner dimension | d = 245 mm |
| weigth | 4 kg |
| suppply | 12 V, 50 Hz (AFO 01.Y; AFO 01.Y.CL) |
| 6 V - 4 x AA battery (AFO 01.YB; AFO 01.YB.CL) | |
| power supply | ZAC 1/20 (max. 3 x AFO 01.Y ; AFO 01.Y.CL) |
AFO 01.SL
drinking fountain with spout for filling bottles designed to stand and to be attached to wall
AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.
In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
TAutomatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Pressure valve with jet
- Pressure valve for bottle filling
- Flexible hose outflow
- Fixing and connecting material
| dimensions | 330 x 900 x 365 mm |
| water outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 2 - 6 Bar, recommended 3 Bar |
| weight | 12 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"
.jpg)
