Delabie напольный питьевой фонтан Delabie ILHA JR Н/Р сталь
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee
Единица: шт
Время доставки: 14-21 день
Продавец: PEGU OÜ
Delabie напольный питьевой фонтан Delabie ILHA JR Н/Р сталь
Delabie Joogifontöön ILHA JR H-800mm R-V teras
Floor-standing ILHA JR drinking fountain
Ref. 180110
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.5mm.
Height: 800mm for children.
Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M⅜".
Flat perforated waste, without screws: easy to clean and vandal-resistant.
Recessed vertical water outlet. Waste outlet 1¼".
Weight: 9kg.
TECHNICAL CHARACTERISTICS
Floor-standing ILHA JR drinking fountain
Ref. 180110| Height | 800mm |
| Length | 320mm |
| Width | 320mm |
| Thickness | 1.5mm |
| Finish | 304 polished satin stainless steel |
Segisti, isesulguv
kroom
30sek töötsükkel
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
1092х383х80 мм
> Working pressure: 1 to 5 bar
> Flow: 3 l/min at 3 bar - 4 position-setting Anti water-hammer system
> Flow time: 7 seconds - lever upwards 11 seconds - lever downwards
> Hydraulic supply: 2 PEX hoses DN8 G3/8'' - 350mm
> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Safety: With S® antiblocking system to prevent blocking in continuous flow With temperature limiter (at 38°C for cold water at 15°C/3 bar and hot water at 60°C/3 bar)
> Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer
> Installation: Cross-partition Wall thickness: 0 to 50 mm
> Delivered with: 2 PEX hoses with swivel nut and NF check valves 2 MM 3/8'' (12x17) stop valves 2 Filter gaskets 1 clamping nut > Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
