Water inlet | G 1/2" |
Water pressure | 2 – 6 Bar, recommended 3 Bar |
Outlet | d = 40 mm |
Inner dimensions of sink | d = 290 mm |
Weight | 20 kg |
Delabie раковина DUO S TC R нержавеющая сталь сатин
Бренд:

Единица: шт
Время доставки: 14-21 день
Продавец: PEGU OÜ
МАЙСКАЯ АКЦИЯ – ПРОМОКОД PEGU-KEVAD2025
Используйте промокод и получите скидку на товары, не участвующие в других майских акциях!
✔ Скидка действует только в мае – успейте воспользоваться!
✔ Качественный товар с быстрой и безопасной доставкой
✔ Надёжный интернет-магазин PEGU.ee и профессиональный сервис
Добавьте товар в корзину, введите там промокод PEGU-KEVAD2025 и получите скидку на товары, не включённые в другие акции этого месяца.
Только в мае – успейте до окончания акции!
PEGU.ee – разумный выбор для тех, кто ценит стиль, качество и удобство покупок.
DUO S TC R washbasin
Ref. 160360
Wall-mounted washbasin with through-the-wall installation for service ducts.
Integrated countertop.
Basin on the right.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths are available on request).
Recessed horizontal waste outlet Ø 1".
Flat perforated waste, without screws:easy cleaning and vandal-resistant.
Without overflow. Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 8.5kg.
Файлы
REDO wall-mounted washbasin
Ref. 121710
Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With central tap hole Ø 35mm.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
TECHNICAL FEATURES
REDO wall-mounted washbasin
Ref. 121710
Height | 150mm |
---|---|
Length | 375mm |
Width | 430mm |
Thickness | 1.2mm |
Finish | 304 polished satin stainless steel |
Drinking fountain in stainless steel 18/10 for wall mounting. Supplied with supporting bracket, grated waste, wall panel and water bubbler.
Питьевой фонтан free-standing механический Н/Р сталь AISI304
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction