Delabie раковина TEK TC нержавеющая сталь с краном 7 sek сатин
TEK TC washbasin
Wall-mounted washbasin, cross wall installation for service ducts.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths available on request.
Supplied with 1 time flow tap: stainless steel tamperproof push-button and anti-blocking, 7 seconds time flow.
Recessed horizontal waste outlet Ø 32mm.
Flat, perforated waste, without screws: easy to clean and vandal-resistant.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
1 1/4" keere + 300mm toru ja rosett
automatic washing system for wellingtons with jets - 12V, 50Hz
|Radius of sensor||0 – 0,4 m|
|Water inlet||G 1/2“|
|Water pressure||0,3 – 1,0 MPa|
|Outlet||d = 32 mm|
|Inner dimensions of the trough||250 x 400 x 280 mm|
|Electricity protection||IP 55|
|Power supply||12 V, 50 Hz|
|Power requirement||10 VA|
|Source of power supply||ZAC 1/20 (max. 2 x AMO 01)|
|ZAC 1/50 (max. 5 x AMO 01)|
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Valamu R/V terasest
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" waste with plug and overflow.
drinking fountain with cooling and spout for filling bottles designed to stand and to be attached to wall
AFO 01.SCL is a drinking fountain with cooling and spout for filling bottles designed to stand and to be attached to wall. User can select between uncooled water and water running through a flow cooler. Uncooled water is used for bottle filling as a standard – can be changed. Start/stop control by piezo-buttons – resistant solution. Facility keeper can set a time period after which the water flow automatically stops.
The product contains a flow cooler. It is not a design with cooled tank only where – after the pre-cooled amount of water is pumped out – the user has to wait for the next charge to be cooled.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.SCL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
- Stainless housing with cone
- Electronics and control piezo-buttons
- Water supply and electromagnetic valves
- Flow cooler
- Flexible hose outflow
- Fixing and connecting material
|dimensions||330 x 900 x 365 mm|
|water outlet||d = 40 mm|
|water inlet||G 1/2"|
|water pressure||0,2 – 0,6 MPa, recommended 0,3 MPa|
|power supply||230 V, 50 Hz|
|power input||830 W|
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"
- Electric socket 230 V, or set up electric cable CYKY 3C x 1,5