Категории
Uudised
Delabie utiliseerimise põranda valamu Vidoir XL P R/V teras AISI304 182070 Zoom

Delabie утилизационная раковина напольная Vidoir XL P Н/Р сталь AISI304

Артикул: DE-182070
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена:
2182,20 €
Kuumakse alates: 185,49 €
Кол-во: - +

Floor-standing XL P disposal sink 
Ref. 182070

Floor-standing disposal sink. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.5mm. 
Smooth surface is easy to clean. 
Concealed perimetral flushing system. 
Horizontal or vertical water inlet: Ø 55mm. 
Horizontal or vertical water outlet: Ø 100mm. 
Supplied with PVC pipe. 
Concealed drainage: shrouded sink. 
Quick and easy to install: 2 access panels 
with theft prevention TORX security screws. 
Hinged stainless steel bucket grid. 
Weight: 16kg. 

 

 

TECHNICAL FEATURES 

Floor-standing XL P disposal sink 
Ref. 182070

Height 450mm
Length 445mm
Width 410mm
Thickness 1.5mm
Finish 304 polished satin stainless steel

Файлы

Схожие продукты

Jooksutoru pööratav, valamule

Артикул: P30202 ,   Время доставки: 7 дней ,   Viimistlus:
144,33 €
Антивандалльная душевая пьезо кнопка Н/Р сталь, для смешанной воды,  без адаптора
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Артикул: AZP-AUS 11 ,   Время доставки: 3-4 недели ,   Viimistlus:
381,15 €
Артикул: PINP-655-OVC-TB-P+PWC Mahagon ,   Время доставки: 8 недель ,   Viimistlus:
2468,82 €

Stainless steel rectangular mirror, H. 500mm 
Ref. 3452

Depth 10mm
Length Unbreakable mirror
Width 385mm
Drop height 485mm
Finish "Mirror" polished 304 stainless steel
Артикул: DE-3452 ,   Время доставки: 7-21 день ,   Viimistlus:
279,51 €

General

Size (mm): 525 x 334 x 97
Large bowl (mm): 500 x 310 x 83
Designer: Halvor Thorsen

 

 

Description

Icon hand wash basin IC1-22 in stainless steel 18/10, is designed for under mounting.The hand wash basin is pressed in one piece and has laser-cut integrated outlet holes that are concealed by a removable outlet cover.The basin is supplied with waste. Without overflow.

Brushed finish.

Артикул: I-IC1 32N ,   Время доставки: 14-21 день ,   Viimistlus:
446,20 €

PEGU.ee — каждый смеситель и аксессуар для ванной отобран на основе личного опыта.Вас консультирует сантехнический эксперт Александр Гуменюк, опыт 25+ лет. info@pegu.ee · +372 515 0681