Дозатор для перчаток Wagner Ewar WP123 Н/Р сталь сатин

298 x 448 x 310 mm
18 l

• Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With screws off-floor below vanity unit, or as an option with console or base for a surcharge.
• Delivery includes fixing material.

• Weight (in kg): 7,1

298 x 298 x 120 mm
ca. 250 paper towels

• Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• With deep-drawn paper removal opening for easy paper removal.
• Designed for approx. 250 standard paper towels in zigzag fold.
  Paper size (folded): 240-250 mm x 100-115 mm.
• Inspection slot to indicate fill level.
• Accessible for refilling through lockable front flap with fall protection.
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Installation dimensions: 300 x 300 x 110 mm
• Mounting: With four screws in wall opening through fixing holes in the side walls.
• Delivery includes fixing material and one pack of paper towels.

• Weight (in kg): 3,7

• Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting behind fixed mirror on site.
• One-hand operated and non-drip soap pump with 200 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard liquid soaps or hand lotions. Accessible for refilling through spring stop pin and by removing from below. 
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
  Depth of substructure installation: min. 120 mm
  Height above vanity unit: min. 160 mm
• Delivery includes fixing material and self-adhesive information label „Soap“.

• Weight (in kg): 0,5

87 x 248 x 120 mm

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting in cabinet on site.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard disinfectants. Refillable from the top. 
• Note: Not approved for medical areas.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With three screws through key holes in the back wall. 
• Delivery includes fixing material, batteries and self-adhesive information label „disinfectant“.

• Weight (in kg): 1,1

91 x 259(221) x 98 mm

• Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting behind fixed mirror on site.
• One-hand operated and non-drip soap pump. 
• Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Accessible for refilling through spring stop pin and by removing from below. 
• Also refillable with large container using the plug-in tank as an option.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
  Depth of substructure installation: min. 130 mm
  Height above vanity unit: min. 220(250) mm 
• Delivery includes fixing material, self-adhesive information label „Soap“ and first fill with soap.

• Weight (in kg): 1,5