Категории
jpg_186000_1.jpg Zoom

Хирургическая раковина с высоким брызгозащитным экраном 1400mm нержавеющая сталь сатин AISI304

Артикул: DE-186000
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена:
3721,00 €
Kuumakse alates: 316,29 €
Кол-во: - +
   - или -   

Хирургическая раковина с высоким брызгозащитным экраном 1400mm нержавеющая сталь сатин AISI304

Хирургическая раковина с высоким брызгозащитным экраном
Артикул: 186000
Отделка: Полированная сатинированная нержавеющая сталь 304 – для 2 рабочей зоны – Дизайн "Hygiene+"

Описание

Настенная хирургическая раковина с брызгозащитным экраном высотой 450 мм. Идеально подходит для больниц и медицинских учреждений.

Изготовлена из бактериостатической нержавеющей стали 304. Полированная сатинированная отделка, толщина стали 1,2 мм. Длина раковины – 1400 мм, рассчитана на две рабочих зоны, без отверстия под смеситель.

  • Гладкая поверхность и закругленные внутренние края для легкой очистки.
  • Дизайн "Hygiene+": минимизирует зоны скопления бактерий, скрытый слив, простота ухода.
  • Слив справа.
  • Без перелива.
  • В комплекте крепежные элементы и слив 1"1/4.

Соответствует маркировке CE и стандарту EN 14296.

Вес: 34,4 кг


Технические характеристики

  • Высота: 1020 мм
  • Длина: 1400 мм
  • Ширина: 475 мм
  • Материал: Бактериостатическая нержавеющая сталь 304
  • Толщина: 1,2 мм
  • Отделка: Полированная сатинированная

Идеально соответствует высоким стандартам гигиены современных медицинских учреждений!

Surgical scrub-up trough with high upstand 
Ref. 186000

Wall-mounted surgical scrub-up trough with 450mm upstand. 
Suitable for hospitals and healthcare facilities. 
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm. 
Length 1,400mm, 2 services. Without tap hole. 
Smooth surface and rounded inside edges for easy cleaning. 
"Hygiene+" design: reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. 
Supplied with fixing elements.Weight: 34.4kg.

Файлы

Схожие продукты
Антивандалльная душевая пьезо кнопка Н/Р сталь, для смешанной воды,  без адаптора
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Артикул: AZP-AUS 11 ,   Время доставки: 3-4 недели
375,00 €

Полка + Настенный крепёж для инвентаря 4-й, Mop and Broom Holder Н/Р сталь AISI304

DESCRIPTION

 
 
Shelf is 18‑gauge (1.2mm), type 304 stainless steel, satin finish; 36" Long, 6" H, 8" D (915 x 150 x 205mm). Four anti-slip mop holders have spring-loaded rubber cam that grips handles 7⁄8" to 1 1⁄4" (20–30mm) diameter. Holds mops 8" (205mm) from wall. Three stainless steel rag hooks. Rod for wet rags below shelf.
Артикул: B-224x36 ,   Время доставки: 6-8 недель
620,10 € (10%)
689,00 €

Сливной механизм для писсуара инфра-красный датчик монтажная коробка, с встроенным элементом питания 230V/AC

SLP 02NZ

 

Urinal infra-red flushing unit with a mounting box and integrated power supply, 230 V AC

 

Characteristics

  • system reacts to the user attendance in front of the urinal at a maximum distance of 0,7 m, minimum stay time in active range is 7,5 s
  • water flows after the user leaves active range
  • adjustable flushing time 0,5 - 15,5 s
  • parameters adjustment by remote control SLD 03
  • automatic hygiene flushing after 24 hours non-use
  • possibility to regulate a water flow by the ball valve
Order number 42023 
Code SLP 02NZ 
 

Supply specification

SLP 02NZ - Supply No. 42023 - stainless steel cover with electronics, plastic mounting box with brass screw coupling, electromagnetic valve and ball valve, power supply

Technical information

Stainless steel cover dimension: 170 x 170 x 10 mm
Mounting box dimension: 140 x 140 x 75 mm
Operating voltage: 230 V AC/50 Hz
Active range: 0,6 - 0,75 m
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 3/4“
Water outlet: male thread G 3/4“
Артикул: SA-SLP02NZ ,   Время доставки: 14-21 день
415,00 €

Питьевой фонтан настенный механический  для бассейнов Н/Р сталь AISI316 (бассейны)

AFO 01 stainless steel wall-mounted drinking fountain

AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

  • stainless steel sink with casing
  • press valve
  • corner valve with filter
  • flexible hose siphon
  • fixing bar
  • connecting hoses
  • anchoring material
Water inlet G 1/2"
Water pressure 0,2 – 0,6 MPa (recommended 0,3 MPa)
Outlet d = 40 mm
Inner dimension of the fountain d = 245 mm
Weight 4 kg

 

Артикул: AZP-AF001.CL ,   Время доставки: 3-4 недели
1075,00 €