Кран для смешанной воды Delabie TEMPOMAC с сенсором 155mm сквозь стену 230V/12V
Бренд:
Единица: шт
Время доставки: 14-21 день
Попробуй промокод PEGU-KEVAD! Выбери товар по полной цене, добавь в корзину, и введи код купона при покупке! Время работы промокода ограничено!
Кран для смешанной воды Delabie TEMPOMAC с сенсором 155mm сквозь стену 230V/12V
Veekraan eelsegatud veele Delabie TEMPOMAC sensoriga 155mm läbiseina 230V/12V
TEMPOMATIC Electronic tap
Ref. 441157
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Shockproof infrared presence detection sensor for wall ≤ 155mm
Anti-blocking security.
Solenoid valve with integrated filter.
Chrome-plated fixed spout L. 170mm for wall ≤ 165mm with anti-rotating pin.
Threaded rods can be cut-to-size.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
TEMPOMATIC Electronic tap
Ref. 441157| Supply | 230/12V mains supply |
| Connector | M3/8" |
| Technology | Electronic |
| Depth | 165mm |
| Spout length | 170mm |
| Flow rate | 3 lpm |
> Working pressure :
1 to 5 bar
> Flow :
1.9 l/min with integrated flow limiter sprayer High quality anti-limescale aerator Anti-water-hammering device
> Hydraulic supply :
G 3/8" (12x17)
> Power supply :
Integrated 6V CRP2 lithium battery in a waterproof case, located inside the tap body.
> Material and colour finish :
Injected molded metal body Chrome plated cover
> Thermal resistance :
Resistant to a temperature of 75°C for 30 minute thermal shocks
> Security :
Maximal limited temperature by ajustable temperature limitor device
The solenoid valve will be closed automatically in case of over flow (>30 seconds), low battery or any damage of detector Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with :
1 Brass clamping nut
1 Gasket and 1 Washer
2 PEX Hoses with revolving nuts and NF check valves 2 Filter gaskets
1 Self-adhesive sticker
Instruction manual
> Standards & approvals :
Brass in accordance with EN1982, EN12164, EN12165
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
CURVE series electronic basin mixer with infrared sensor and fixed high spout. Battery operated
High tap (fixed) with spout H=250 mm, projection 200 mm
Mechanical mixing with side lever
Infrared sensor with activation on presence detection
Vandal proof stop after 1 min of continuous flow
Automatic anti-legionella water flow every 24h after last use
Long-life 6V lithium battery (220,000 cycles)
Sealed battery box for installation under basin
- Mirror in robust, germ-reducing and easy-care stainless steel mirror sheet metal (AISI 304).
- Mounting: With four Torx® locking screws.
- Delivery includes fixing material.
- Other dimensions available upon request.
- Weight (in kg): 2,0
158,60 €
SECURITHERM shower panel
Ref. 792330
SECURITHERM dual control thermostatic time flow shower panel:
Anodised aluminium shower panel for wall-mounted, exposed installation.
With concealed inlet via flexibles, M½".
SECURITHERM thermostatic mixer.
Adjustable temperature control from cold water up to 38°C with 1st limiter set at 38°C and 2nd limiter set at 41°C.
Anti-scalding safety: automatic shut-off if cold or hot water supply fails.
Thermal shocks are possible.
Time flow valve ~30 seconds with soft-touch operation.
Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation at 6 lpm at 3 bar.
Handset with removable flexible via push-fit rapid STOP connector and wall support supplied.
Concealed fixings.
Filters and non-return valves.
> Working pressure :
1 to 5 bar
> Flow :
3 l/min with integrated flow limiter
High quality anti-limescale aerator (new aerator since June 2016) Anti-water-hammering design
> Hydraulic supply :
G 3/8" (12x17)
> Power supply :
6 V lithium battery (CRP2 type) in a casing placed within the tap body
> Material and colour finish :
Chrome-plated metal alloy components
Injected molded metal body and cover
150mm extended body
Distance from the base up to the detection cell: 205 mm
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Temperature limiting system to avoid any risk of scalding
Anti-overflow security time: 30 seconds
Anti-blocking system preventing the water to flow continuously
Solenoid valve automatically shut down in case of power shortage or in case of sensor degradation
> Delivered with :
Instruction manual
2 Fastening nuts
1 Gasket and 1 Washer
2 PEX flexible hoses with F 3/8'' nut (12x17) and NF non-return valve 2 Straight stop valves G 3/8" (12x17)
2 Filter gaskets
> Standards & approvals :
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227