•  Arc Front Surface Mounted Auto-Cut Roll Paper Towel Dispenser shall hold and dispense one 205mm wide, 170 mm diameter, non-perforated paper towel rolls.

•  Touch-Free pull towel mechanism dispenses one 280 mm length of towel paper per pull. User only touches the paper.

•  Structural assembly of all components shall be of welded construction.

•  Compact, robust and vandal-proof design.

•  Suitable for collectivities. It can be installed in hospitals, elderly centers, offices, production centers kitchens and catering, etc.

  Components & materials

•  DT0208ACS: Stainless steel satin finish, 0.8

  mm thick.

•   UNIT FRAME AND CABINET: made in stainless steel AISI 304, 0.8 mm thick.

•   COVER: made in stainless steel AISI 304, 0.8 mm thick. It is attached to the back plate with two pivots and shall be held closed with a tumbler lock keyed alike to other washroom equipment. Locking door prevents unauthorized access or removal.

•   OPERATION LABEL: permanently affixed to inside rear panel to illustrate correct paper loading,

> Working pressure :

1 to 5 bar

> Flow :

6 l/min with integrated flow limiter Anti-water-hammering device
Fixed shower head with anti-limescale spikes

> Flow time :

30 seconds (± 5 sec.)

> Hydraulic supply :

G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 On P 50 tap NF II and thermostatic mixer tap EN 1111 (NF check valves)

> Material :

Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS casings

> Functioning:

Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate

> Thermal resistance :

Resistant to a temperature of 75°C for 30-minute-thermal-shocks

> Security :

"Legionella" version: pre-equipped for PRESTO solutions
Anti-scald system: flow is immediately stopped if the cold water is cut off Maximum delivered temperature : pre-fixed at 38°

> Delivered with :

1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screws and instruction manual

> Standards & approvals :

Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540