• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

5th Avenue is suitable for most stringent requirements in terms of design and hygiene, a stunning hand-washing system for hotel and residential suites and public lavatories.
Perfect balance between practicality and pleasing aesthetics.
Area of use: public, semi-public, private space.

 

• White painted steel straight grab bars with Polypropylene snap flanges, suitable for people with reduced mobility, elderly people or the handicapped, especially designed to make their life a little bit easier.

• Can be installed in horizontal, vertical or slanting position.

• Models suitable for both, home and public use.

• 32 mm diameter bar for easier gripping.

• Provide confidence and stability.

• Concealed fixings thanks to their Polypropylene snap flanges.

• Optionally, they have a kit to avoid electrical conductivity (code KA0010).

• Supplied with stainless steel screws for concrete walls.

148 x 348 x 150 mm
with concealed reserve roll

• Toilet roll holder with one concealed reserve roll in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded. Visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Designed for two standard toilet rolls, including one concealed reserve roll, which drops down automatically with dimensions:
  Outer diameter max. 125 mm
  Width max. 100 mm
  Core diameter min. 38 mm
• Inspection slot to indicate fill level.
• Accessible for refilling through lockable front flap. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Installation dimensions: 150 x 350 x 140 mm
• Mounting: With four screws in wall opening through fixing holes in the side walls. 
• Delivery includes fixing material.

• Weight (in kg): 3,2