Полка + Настенный крепёж для инвентаря 4-й, Mop and Broom Holder Н/Р сталь AISI304
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee
Единица: шт
Время доставки: 6-8 недель
Продавец: PEGU OÜ
Полка + Настенный крепёж для инвентаря 4-й, Mop and Broom Holder Н/Р сталь AISI304
DESCRIPTION
Файлы
MATERIALS: Shelf — 18-8, Type 304, 18-gauge (1.2mm) stainless steel with satin finish. Shelf has 1-1/2'' (38mm) return edge for maximum rigidity. Mounting Brackets — 18-8, Type 304, 18-gauge (1.2mm) stainless steel with satin finish; welded to shelf. Mop/Broom Holders — Spring-loaded rubber cams with anti-slip coating. Rag Hooks — 18-8, Type 304, 16-gauge (1.6mm) stainless steel with satin finish; secured to shelf with rivets. Drying Rod — 18-8, Type 304, 1/4'' (6mm) diameter stainless steel with satin finish. OPERATION: Surface-mounted utility shelf with holders is designed to keep mops and brooms away from wall. Spring-loaded rubber cam holders accommodate mop or broom handles from 7/8'' to 1-1/4'' (22–32mm) diameter. Hooks for conveniently storing rags are located on front of shelf. Rod for hanging wet rags is located below shelf between mounting brackets. INSTALLATION: Secure unit to wall with four sheet-metal screws, furnished by manufacturer, at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
CANAL wall-mounted wash trough
Ref. 120300
Wall-mounted wash trough for 4 posts - 2,400mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 20kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007).
| Height | 250mm |
|---|---|
| Length | 2400mm |
| Width | 400mm |
| Thickness | 1mm (basin) et 1.5mm (edge and fixing brackets) |
| Finish | 304 polished satin stainless steel |
Splashback 2400mm for CANAL wash trough
Ref. 100300
Splashback for CANAL wash trough.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Length: 2,400mm.
TECHNICAL FEATURES
Splashback 2400mm for CANAL wash trough
Ref. 100300
| Height | 300mm |
|---|---|
| Length | 2400mm |
| Width | 1.5mm |
| Thickness | 1.2mm |
| Finish | 304 polished satin stainless steel |
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
Sobib kraanile DUO
| ø600x120mm |
