Категории
Kätepesuvalamu roostevabast terasest Endura INTRA ED1 vaade 1 Zoom

Раковина Н/Р сталь Endura ED1

Артикул: I-ED1
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена:
594,00 €
Kuumakse alates: 50,49 €
Кол-во: - +

Kätepesuvalamu Endura ED1

 
 
600x415x130 mm
Схожие продукты

MORA незамерзающий садовый кран 1000mm, ключ+вакумный клапан 461760

MORA GARDEN - Frost-proof garden valve

Our garden valves are self-draining and therefore frost-proof even if you forget to dismantle the garden hose before the season with degrees below zero. However, we recommended that you always remove the hose and coupling when there is a risk of low temperatures.

DescriptionFor wall thickness max. 1000 mm

Article number 461760

PROPERTIES

  • Self-draining
  • Key included
  • With approved non-return valve
  • Can be cut to suit wall thickness
  • Wall bracket: H=110 mm, W=60 mm
  • Approved backflow prevention device, EN-Standard EN 1717
Артикул: 461760 ,   Время доставки: 7-14 дней ,   Viimistlus:
425,00 €

Антивандальный унитаз INVA Н/Р сталь

AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.

 

The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.

 

It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.

Basic technical information
Water inlet: d= 34 - 50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 27 kg
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
  • Stainless-steel backrest
Артикул: AZP-AUZ-08-INV ,   Время доставки: 3-4 недели ,   Viimistlus:
2672,10 €

BOWL

  • Frost-free drinking fountain
  • Made from masive and from glass peened stainless steel
  • Suitable for schools, urban space etc. 
  • Beautiful design 
  • Without any sharp edges
  • Automatic closing grip
  • Reduces water wastage
Артикул: FL-F200 ,   Время доставки: 21 день ,   Viimistlus:
4848,00 €

Питьевой фонтан настенный механический  для бассейнов Н/Р сталь AISI316 (бассейны)

AFO 01 stainless steel wall-mounted drinking fountain

AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

  • stainless steel sink with casing
  • press valve
  • corner valve with filter
  • flexible hose siphon
  • fixing bar
  • connecting hoses
  • anchoring material
Water inlet G 1/2"
Water pressure 0,2 – 0,6 MPa (recommended 0,3 MPa)
Outlet d = 40 mm
Inner dimension of the fountain d = 245 mm
Weight 4 kg

 

Артикул: AZP-AF001.CL ,   Время доставки: 3-4 недели ,   Viimistlus:
1092,62 €

Антивандальный комплект для раковины 1-200mm толщина стены Presto 31660

> Working pressure : 1 to 5 bar

> Flow : 6 l/min at 3 bar - 4-position flow adjustment device Anti-water-hammering design

> Flow time : 15 seconds (± 5 sec.)

> Hydraulic supply : In-line water inlet M G 1/2" Inlet and outlet Cold water

> Thermal resistance : Resistant to a temperature of 75°C for 30 minute thermal shock

> Security : Patented anti-blocking "S" system to avoid the water to flow continuously

> Delivered with : 1 Cross-partition control (1 to 200 mm thick) 1 Short wall spout (Non-rotating fixing) 87 mm 1 Closing tap with S anti-blocking system 1 stop valve M 1/2" (15x21) / M 1/2" (15x21) with quick couplings (12x14 mm) Instruction manual

> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12156 Molded chrome-plated body in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 922

Артикул: P31660 ,   Время доставки: 6-7 недель ,   Viimistlus:
354,00 €

PEGU.ee — каждый смеситель и аксессуар для ванной отобран на основе личного опыта.Вас консультирует сантехнический эксперт Александр Гуменюк, опыт 25+ лет. info@pegu.ee · +372 515 0681