87 x 289 (251) x 130 mm

• Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting in cabinet on site.
• One-hand operated and non-drip soap pump. 
• Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Refillable from the top. 
• Also refillable with large container using the plug-in tank as an option.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material, self-adhesive information label „Soap“ and first fill with soap.

• Weight (in kg): 2,7

> Working pressure: 1 to 5 bar

> Flow: 3 l/min at 3 bars - 4-position setting Anti water-hammer system

> Flow time: 7 seconds - lever upwards 11 seconds - lever downwards

> Hydraulic supply: 2 PEX hoses DN8 G3/8'' - 350mm

> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme

> Safety: With S® antiblocking system to prevent blocking in continuous flow With temperature limiter (at 38°C for cold water at 15°C/3 bar and hot water at 60°C/3 bar) > Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer

> Delivered with: 2 PEX hoses with swivel nut and NF check valves 1 base gasket 2 MM 3/8'' (12x17) stop valves 2 Filter gaskets 1 Fixing bracket

> Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 922

148 x 448 x 120 mm
950 ml bottle

• Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• One-hand operated and non-drip soap pump. 
• Designed for standard 950 ml disposable bottles of liquid soap or hand lotion. 
• Also refillable with large container using the plug-in tank as an option.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, removable front panel with fall protection. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts and front panel can be replaced as modules. 
• Installation dimensions: 150 x 450 x 110 mm
• Mounting: With four screws in wall opening through fixing holes in the side walls. 
• Delivery includes fixing material and first fill with soap.

• Weight (in kg): 4,0

ARKI + ® handle 448mm. H2520. Available in 4 finishes.