Käterätikuivati on valmistatud messingist. (brass)

Полотенцесушители выполнены из латуни

Sobib nii küttevee kui ka tarbevee süsteemi.

Подходят как для отопительной системы, так и для ГВС

Maksimaalne töörõhk on 600 KPa

Максимальное рабочее давление 600 KPa

Maksimaalne temperatuur 85°C

максимальная температура 85°C

Võimalikud viimistlused Chroom +...%

Возможные покрытия Chroom +...%

• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Skyline handle CC160mm. Available in matt chrome, brushed, polished and black. H2564

Kerge töö tänu õlihüdraulilisele jõuülekandele. Ideaalne komposiittorude jaoks kuni Ø 32 mm. Ka roostevabade terastorude jaoks kuni Ø 22 mm. Õlihüdrauliline käsi-torupainutaja Ø 10–32 mm, ⅜–⅞", kuni 90°. Pehmed vasktorud Ø 10–22 mm, Ø ⅜–⅞", s ≤ 1 mm, pehmed kaetud vasktorud Ø 10–18 mm, Ø ⅜–⅝", s ≤ 1 mm, pressliitesüsteemide roostevabast terasest torud Ø12-22 mm, s ≤ 1,2 mm, kaetud pehmest süsinikterasest torud Ø12–18 mm, s ≤ 1,2 mm, pehmed täppisterasest torud Ø10–22 mm, s ≤ 1,5 mm, komposiittorud Ø14–32 mm. Kuni Ø26 mm, ajamiseade, painutussegmendid, liuguri kandja H-S Ø10–26 mm koos liuguritega, kuuskantvõti, tugevas kohvris. Kuni Ø32 mm, ajamiseade, painutussegmend, 2 liuguri kandjat Ø 10–26 mm ja Ø 32 mm koos liuguritega, kuuskantvõti, tugevas kohvris.

86 x 257 x 120 mm
700 ml tank

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing with rounded vertical corners, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• With EWAR® eModule touch-free operated disinfectant pump with 700 ml tank. 
• Designed for standard disinfectants for hands.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and batteries.

• Weight (in kg): 1,8