• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Prügikast 40l, seinapealne paigaldus

teras must

kotiraamiga 

Käetugi 738mm ületõstetav

teras valge epoksükate

d 32mm

toru paksus 1,5mm

Pelavajutav äärikukate d 85mm

600 x 58 x 40 mm

• Towel rail in solid, germ-reducing and easy-care stainless steel (AISI 303), satin finished.
  Further available surfaces: see below. 
• Two concealed anti-theft wall disc mountings.
• Holder diameter 16 mm
  Towel rail diameter 12 mm
  Distance between mounting points 600 mm
• Mounting with two screws.
• Delivery includes fixing material.

• Weight (in kg): 0,80

298 x 448 x 310 mm
18 l

• Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With screws off-floor below vanity unit, or as an option with console or base for a surcharge.
• Delivery includes fixing material.

• Weight (in kg): 7,1