Категории

Бренды

Скидки и акции

Mediclinics инвалидная ручка левая настенная/напольная, нержавеющая сталь AISI304 полированная

Артикул: MBI0820C , Время доставки: 14 -21 день

General description

 Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
 With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
 These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced

mobility. Models suitable for public use.
 Well suited for keeping bathrooms and public enclosures barrier-free.
 Highest durability and great resistance to rusting.
 Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
 Supplied with plugs and screws to fix the bar to a brick wall.

Components and materials
-  BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-  BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-  BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-  BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-  TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-  CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-  SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.

152,95 € (-5%) 161,00 €

Душевая панель PRESTOTEM2 P50 TM, с лифтом 30 sek рабочий цикл, с термостатом

Артикул: P88802 , Время доставки: 14-21 день

> Working pressure : 1 to 5 bar

> Flow : 6 l/min with integrated flow limiter Anti-water-hammering device Hand-held shower on rail with chrome plated slide

> Flow time : 30 seconds (± 5 sec.)

> Hydraulic supply : G 1/2"(15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026. On P 50 tap NF II and thermostatic mixer tap EN 1111 (NF check valves)

> Material : Anodised aluminum profile (2.5mm thickness) Aluminum removable valve plate, peinted RAL 7005 High resistance RAL 7005 coloured ABS casings

> Functioning: Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate

> Thermal resistance : Resistant to a temperature of 75°C for 30-minute-thermal-shocks

> Security : Anti-scald system: flow is immediately stopped if the cold water is cut off Maximum delivered temperature : pre-fixed at 38°

> Delivered with : 1/2" hoses with revolving nuts MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screw and instruction manual > Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227

907,25 € (-5%) 955,00 €