Категории
Antivandaalne WC pott roostevaba taras AZP Brno AUZ 08 Zoom

Антивандальный унитаз Н/Р сталь

Артикул: AZP-AUZ 08
Бренд:
Единица: шт
Время доставки: 3-4 недели
Цена:
2492,20 €
Kuumakse alates: 211,84 €
Кол-во: - +
Антивандальный унитаз Н/Р сталь
 
 

AUZ 08

stainless-steel standing closet, with hardened seat, back drain

   
 
 
 

AUZ 08 is a stainless-steel WC in matt design. To increase the user comfort, it is provided with a grey seat with a lid made of hardened plastic (newly also with a seat in black design AUZ 08.CS). AUZ 08 is designed to stand on the floor at the wall; it is suitable for places where the common closet cannot be attached to the wall, because of a thin bearing particle, for example. The standard version of AUZ 08 has a back drain (the version with the bottom drain AUZ 02). It is suitable to supplement the WC with the automatic pressure water flushing device AUZ 3, automatic flushing device with the piezo button AUZ 3.P (or the vandal-resistant flushing device BSAZ 01) or any flushing device with a cistern.

 

Thanks to its resistance to damage, the closet is primarily intended for social facilities with demanding operation, such as highway lay-byes, alehouses, etc., where easy maintenance of sanitary conditions is required. WC is also manufactured in the design for the disabled under the designation AUZ 08 INV. 

 

Further closet versions can be found in the section Stainless-steel closets or Stainless-steel safety closets.

 

 
Basic technical information
Water inlet: d= 34-50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 23 kg
 
 
Requirements for setting up the construction
  1. Set-up outlet d = 110 mm including rubber sleeve for pipe d = 90 mm.
  2. Set-up water inlet d= 34-50 mm according to chosen sealing.
 
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
 
 
Made to order
  • AUZ 3 - automatic pressure flushing system
  • AUZ 3.P - automatic pressure flushing system with piezo control
  • BSAZ 01 - vandal resistant pressure flushing system
 

Файлы

 
 

AUZ 08

напольный унитаз из нержавеющей стали, с закаленным сиденьем, сток сзади 

   
 
 
 

AUZ 08 представляет собой туалет из нержавеющей стали, в матовом исполнении. Для повышения комфорта для пользователя, предоставляется с серой крышкой и сиденьем, изготовленным из твердой пластмассы, (теперь и в версии с сиденьем в чёрном исполнении AUZ 08.CS). AUZ 08 предназначен для размещения на пол к стенке, подходит для тех мест, где не возможно прикрепить классический унитаз на стенку, напр., из-за тонкой несущей перегородки. Стандартное исполнение AUZ 08, это со стоком сзади, (вариант со стоком вниз AUZ 02). Туалет пригодно дополнить автоматическим смывным бачком воды под давление AUZ 3, автоматическим смывным бачком с нажимной кнопкой AUZ 3.P, (в случае антивандальным смывным бачком BSAZ 01), или любым устройством со смывным бачком.

 

Унитаз своей устойчивостью к повреждениям, в основном, предназначен для социальных объектов с высокими требованиями , для таких как зоны отдыха на автострадах, пивные бары и т.д., где необходимо чтобы было лёгкое содержание гигиены. Туалет изготовляем также в исполнении для инвалидов, под названием AUZ 08 INV. 

 

Следующие варианты унитазов возможно найти в отделe унитазы из нержавеющей стали или безопасные унитазы из нержавеющей стали .

 
Основные технические характеристики 
Вход воды: d= 34-50 мм
Минимальная пропускная способность: 70 л/мин
Сток: d= 90 мм
Вес: 23 кг
 
 
Требования к установке
  1. Подготовлен выход в пол как указано на рысунке d = 110мм, с манжетой для d = 90мм.
  2. Подготовлена подача воды как указано на рисунке d = 34-50 мм судя по прокладке.
 
 
Комплектация
  • Унитаз из нержавеющей стали
  • Пластиковое сиденье
  • Прикрепляющий материал
 
 
На заказ
  • AUZ 3 - автоматический смыватель унитаза
  • AUZ 3.P - автоматический смыватель унитаза с нажимной кнопкой
  • BSAZ 01 - антивандальный смыватель унитаза
 
Совместимые продукты

AUM 026 INV is a stainless steel, partly wall-built in washbasin, containing the combination of a liquid soap dispenser, water tap and hand dryer in a small space. The washbasin is adjusted to be used also by wheelchair persons – it is shallow, completed with handles, the waste is hidden behind the wall. Controlled by durable piezo-pushbuttons, electronically controlled turn-off (the period of water running is settable by the owner). The washbasin is to be mounted through the wall, all technology components are behind the wall, and thus cannot be damaged by users (anti-vandal design).

A wall-hanged version may be supplied to order, or a version without any of the functions (e.g. onlz water plus soap, or water plus dryer). The washbasin is made of AISI 304 stainless steel. A recommended cleaning agent for stainless products maintenance: Würth – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).

Basic technical information
Power supply: 230 V, 50 Hz
IP protection: IP 55
Dimensions (visible from outside): 800 x 800 x 363 mm
Required thickness of wall: min. 100 mm
Outlet: d = 40 mm
 
Requirements for setting up the construction
  1. Opening in the wal 740 x 740 mm
  2. Prepared el. supply cable 3C x 1,5 s 230 V, 50 Hz
  3. Prepared water outlet according to technical scheme
 
 
Complete delivery
  • Stainless-steel washbasin with handles
  • Electronic hand dryer
  • Electronic soap dispenser
  • Electronic water tap
  • Through-wall frame with bolts
  • Waste with a stink trap
  • 230V / 12V source for the electronics
 
Артикул: AZP-AUM 026.TV INV ,   Время доставки: 3-4 недели ,   Viimistlus:
4370,49 €
Водяной трап Н/Р сталь, D75 mm вертикальный, 150x150mm
 
On võimalik versioonid , vertikaalsed, horisontaalsed D50mm,75mm,110mm
 
 
 
 

PV 01

stainless steel floor trap

   
 
 
 

PV 01 is a fully stainless floor trap with braz designed to drain showers, industrial premises and other inner spaces. The trap is designed as stepping (not driven-over). The trap is made of AISI 304 quality stainless steel. Detergents containing chlorine must not be used for cleaning. If chlorine is contained in the environment, we recommend custom-made model of another material (e.g. AISI 316).

For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

We produce other custom-made models – outlet d = 50 mm, 110 mm; without rim for waterproofing; alternative cover grid (mesh); without braz; with adjustable height, etc. Send us your requirements, we will promptly answer!

 

Version types
PV 01.D.75.P - floor trap d = 75 mm, smell trap, outlet down, rim for waterproofing, not adjustable
PV 01.D.75.S - floor trap d = 75 mm, smell trap , outlet down , rim for waterproofing, adjustable
PV 01.B.75.P - floor trap d = 75 mm, smell trap , outlet to the side, rim for waterproofing, not adjustable
PV 01.B.75.S - floor trap d = 75 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
PV 01.D.50.P - floor trap d = 50 mm, smell trap , outlet down , rim for waterproofing , not adjustable
PV 01.D.50.S - floor trap d = 50 mm, smell trap , outlet down , rim for waterproofing , adjustable
PV 01.B.50.P - floor trap d = 50 mm, smell trap , outlet to the side , rim for waterproofing , not adjustable
PV 01.B.50.S - - floor trap d = 50 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
PV 01.D.110.P - floor trap d = 110 mm, smell trap , outlet down , rim for waterproofing , not adjustable
PV 01.D.110.S - floor trap d = 110 mm, smell trap , outlet down , rim for waterproofing , adjustable
PV 01.B.110.P - floor trap t d = 110 mm, smell trap , outlet to the side , rim for waterproofing , not adjustable
PV 01.B.110.S - floor trap d = 110 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
 
 
Basic technical information
Minimum inner diameter: 70 mm
Diameter of connecting sewerage pipe: 75 mm
Water flow: min. 50 lts / min
Loading class: K3
Weight: 2,2 kg
 
 
Complete delivery
  • Trap body
  • Grid with braz cover
  • Hook to pull up the grid
 
 

 

Requirements for setting up the construction
  1. Completed sewerage drains terminated by DN 75 coupling
  2. Prepared hole in the floor with diameter min. 300 mm (200 mm without rim for waterproofing) and depth min. 120 mm
 
Артикул: AZP-PV 01.D.75.P ,   Время доставки: 3-4 недели ,   Viimistlus:
429,93 €
WC рама с бачком и сливной системой , антивандальная с пластиной из Н/Р стали 
 

BSAZ 5

Wall module construction for WC with vandal-resistant st.steel cover

   
 
 
 

BSAZ 5 is a wall module for wall mounted toilets equipped with anti-vandal stainless steel cover – with resistant stainless safety buttons. The cover is screwed by security bolts therefore it cannot be dismounted without special tools. The system is suitable for spaces where toilet flushing from a cistern is required but where, on the other hand, there is a threat of damaging of usual plastic covers. The robust anti-vandal stainless cover contains stainless control buttons resistant to damage (unlike the usual plastic buttons).

 

The cover of BSAZ 5 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

 

 

 

 
Version types
BSAZ 5 - Wall module construction for WC with vandal-resistant st.steel cover
 
 
Basic technical information
Dimensions of wall module: (1000–1200) × 510 × (160–200) mm
Dimensions of st.steel cover: 510 × 230 × 30 mm
Water inlet: G 1/2"
Outlet: DN 100
 
 
Requirements for setting up the construction
  1. Space for mounting the wall module
  2. Water inlet G 1/2"
  3. Waste pipe for outlet connection (DN 100)
 
 
Complete delivery
  • wall module with cistern
  • st.steel cover with vandal-proof buttons
 
Артикул: AZP-BSAZ 5 ,   Время доставки: 3-4 недели ,   Viimistlus:
1072,30 €
Схожие продукты
WC рама с бачком и сливной системой , антивандальная с пластиной из Н/Р стали 
 

BSAZ 5

Wall module construction for WC with vandal-resistant st.steel cover

   
 
 
 

BSAZ 5 is a wall module for wall mounted toilets equipped with anti-vandal stainless steel cover – with resistant stainless safety buttons. The cover is screwed by security bolts therefore it cannot be dismounted without special tools. The system is suitable for spaces where toilet flushing from a cistern is required but where, on the other hand, there is a threat of damaging of usual plastic covers. The robust anti-vandal stainless cover contains stainless control buttons resistant to damage (unlike the usual plastic buttons).

 

The cover of BSAZ 5 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

 

 

 

 
Version types
BSAZ 5 - Wall module construction for WC with vandal-resistant st.steel cover
 
 
Basic technical information
Dimensions of wall module: (1000–1200) × 510 × (160–200) mm
Dimensions of st.steel cover: 510 × 230 × 30 mm
Water inlet: G 1/2"
Outlet: DN 100
 
 
Requirements for setting up the construction
  1. Space for mounting the wall module
  2. Water inlet G 1/2"
  3. Waste pipe for outlet connection (DN 100)
 
 
Complete delivery
  • wall module with cistern
  • st.steel cover with vandal-proof buttons
 
Артикул: AZP-BSAZ 5 ,   Время доставки: 3-4 недели ,   Viimistlus:
1072,30 €

Разделительная стенка для писсуара LISO,  нержавеющая сталь AISI 304 Delabe 100590

TECHNICAL FEATURES

LISO urinal divider for wall-mounting 
Ref. 100590

Height 700mm
Length 25/50mm
Width 350mm
Thickness 1.5mm
Finish 304 polished satin stainless steel
Артикул: DE-100590 ,   Время доставки: 14-30 дней ,   Viimistlus:
747,90 € (10%)
831,00 €

DRINKING SYSTEM

  • Frost-free drinking system for cattle and horses
  • Fresh and clean water for the animals all year round
  • Without wiring or electricity 
  • A minimum of maintenance
  • No concern about filling the drinking vessels
  • No concern about cleaning the drinking vessels
 
Automaatjootjad sobivad kasutamiseks nii karjamaal kui ka tallides ning nende läheduses asuvates joogikohtades.
Jootjaid on lihtne kasutada ning hobused saavad kiiresti aru, et mugavam on vee juurdevoolu avamiseks vajutada klapile
mitte nina otsaga vaid selle ülaosaga. Kui koon (mokad) on joomiseks vabad, joobki hobune loomulikul viisil vee pindmiselt
kihilt. Seetõttu olemegi valinud jooginõuks lai ja sügav kauss, et tekiks joomiseks mugav veepind.
 
Töötamise põhimõte
Tõusutoru on varustatud isetühjeneva 3-tee
ventiiliga, mis on paigaldatud kaevu, mis omakorda
on süvistatud pinnasesse.
Kui jootjat ei kasutata on veest tühi nii ventiil kui
ka tõustoru, milles olev vesi võiks muidu külmuda.
Nii jootja ventiil ja tõusutoru on külmumiskindlad nii
kaua kuni on külmumiskindel ka vee toitetorustik.
 
 
Артикул: FL-A362 ,   Время доставки: 14-21 день ,   Viimistlus:
1176,00 €

Питьевой фонтан free-standing механический Н/Р сталь  AISI316

AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)

AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl

Package contents

  • stainless steel column and cone with nozzle
  • press valve
  • anchoring construction
  • flexible hose siphon
  • connecting hoses
  • anchoring material
  • Set-up water inlet - pipe G 1/2“
  • Set-up drainage d = 40 mm
  • Prepared alcove for embedding (concreting) in the base construction
Water inlet G 1/2"
Water pressure 2 – 6 Bar, recommended 3 Bar
Outlet d = 40 mm
Inner dimensions of sink d = 290 mm
Weight 20 kg
 
Артикул: AZP-AFO02.CL ,   Время доставки: 3-4 недели ,   Viimistlus:
1934,20 €

Delabie раковина полуутопленная QUADRA 380x380, Н/Р сталь AISI304 120650

Semi-recessed QUADRA washbasin 
Ref. 120650

Semi-recessed washbasin, 380x380mm.
Suitable for use with wall-mounted or extended mixer/tap. 
Basin internal diameter: 310mm.
Cutout diameter: 310mm.
Stainless steel thickness: 1.2mm.
Polished satin finish.
Stainless steel thickness: 1.2mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury. 
Supplied with 1¼" waste. 
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.

 

TECHNICAL FEATURES

Semi-recessed QUADRA washbasin 
Ref. 120650

Height 130mm
Length 380mm
Width 380mm
Thickness 1.2mm
Finish Polished satin 304 stainless steel
Артикул: DE-120650 ,   Время доставки: 14-21 дней ,   Viimistlus:
602,10 € (10%)
669,00 €

PEGU.ee — каждый смеситель и аксессуар для ванной отобран на основе личного опыта.Вас консультирует сантехнический эксперт Александр Гуменюк, опыт 25+ лет. info@pegu.ee · +372 515 0681

Вам у нас понравилось? 

Ваш отзыв очень важен для нас! Оставьте комментарий в Google и помогите нам стать лучше.

https://g.page/r/CfpgmqT62C5fEBM/review

Pegu Google hinnang