Delabie Be-line lift-up съёмное душевое сидение алюминий антрацит
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee

Единица: шт
Время доставки: 14-21 день
Продавец: PEGU OÜ
Be-line lift-up shower seat
Ref. 511920C
Be-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 85 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Файлы
Technical features
Be-line lift-up shower seat
Ref. 511920C
Height | 90mm |
---|---|
Depth | 455mm |
Width | 450mm |
Finish | Metallised anthracite powder-coated aluminium |
Be-line® white shower grab bar with sliding shower head holder
Ref. 511946W
Be-line® straight bar Ø 35mm with sliding shower head holder for people with reduced mobility.
Can be used as a vertical grab bar and a shower head rail for showers or baths.
Matte-white sliding shower head holder with ergonomic locking ring.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte white powder-coated aluminium provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Height: 1,050mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-line® white shower grab bar with sliding shower head holder
Ref. 511946W
Height | 1,050mm |
---|---|
Width to the wall | 38mm |
Thickness | 3mm |
Finish | Matte white powder-coated aluminium |
Be-Line sliding shower head holder
Ref. 511911C
Be-Line sliding shower head holder.
Metallised anthracite.
Support for tilting shower head.
Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
Slides by pressing the grip or pulling on the flexible hose.
Technical features
Be-Line sliding shower head holder
Ref. 511911C
Depth | 48mm |
---|---|
Length | 113mm |
Width | 80mm |
Finish | Metallised anthracite |
Be-line® L-shaped grab bar, white, H. 750mm
Ref. 511970W
Be-line® L-shaped grab bar for showers or baths.
Helps the user stand and move safely in the shower or bath.
Use as a shower rail by adding a shower head holder and/or soap dish.
Can be installed with upright bar on the left or right.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte white powder-coated aluminium provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 750 x 450mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-line® L-shaped grab bar, white, H. 750mm
Ref. 511970W
Height | 750mm |
---|---|
Length | 450mm |
Width to the wall | 38mm |
Thickness | 3mm |
Finish | Matte white epoxy coated aluminium |
Normbau Inox Care Lift-up поднимающаяся инвалидная ручка 2050050 vario, suspendable, L=850mm, настенное крепление
Normbau Inox Care Lift-up inva käepide ülestüstetav 2050050 vario, suspendable, L = 850mm, siena kinnitusega
Inox Care Lift-up support rail 2050050 vario, suspendable, L = 850mm, with base plate
Lift up support rail vario with base plate,
length 850mm, 32mm dia.,
made of stainless steel, material No. 1.4301 (A2 AISI 304), brushed finish, left or right hand application, space required in vertical position 193mm from wall, with adjustable brake, easy installation by mounting to a base plate.
Base plate, made of stainless steel for balanced wall mounting, concealed screw fixing, supplied without fixing screws and plugs, conform to German standard DIN 18040 1-2, maximum loading permitted: 125 kgs.
850mm length conform to German standard DIN 18040-1/2, Austrian standard ÖNORM B1600.
TÜV PRODUKT SERVICE certified.
Select appropriate fixing material to suit site conditions. Can be fitted with paper roll holder 2050 300 may be added at a later stage.
Normbau Inox Care инвалидная ручка настенная 2053040 L=400mm
Normbau Inox Care inva käepide 2053040 L = 400mm
Inox Care Grab bar/Towel holder 2053040, c/c = 400mm
c/c = 400mm,
made of stainless steel, material No. 1.4301 (A2, AISI 304), 32mm dia., brushed finish, 70mm dia., steel cored roses, concealed fixing. Rose inners with compensation of wall diff erences.
Maximum loading permitted: 175 kgs.
Supplied with 6mm dia x 70mm stainless Torx screws and plugs for solid masonry.