Delabie Be-line lift-up съёмное душевое сидение с ногой алюминий антрацит
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee

Единица: шт
Время доставки: 14-21 день
Продавец: PEGU OÜ
Be-line lift-up shower seat with leg
Ref. 511930C
Be-line removable lift-up for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid seat made from high strength polymer.
Non-slip surface.
Reinforced by a central, hinged leg which folds automatically.
Metallised anthracite finish provides a good visual contrast with the wall.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 443 x 450 x 480mm.
Folded dimensions: 87 x 541mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line lift-up shower seat with leg
Ref. 511930C
Height | 480mm |
---|---|
Depth | 443mm |
Width | 450mm |
Finish | Metallised anthracite |
Duššiiste seinale
600mm satii R/V teras
600mm satii R/V teras
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
Be-Line drop-down support rail for people with reduced mobility.
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers.
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Slowed down descent. Retained in upright position.
Aluminium tube.
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 650 x 210 x 120mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
Height | 210mm |
---|---|
Length | 650mm |
Width | 120mm |
Finish | Powder-coated metallised anthracite aluminium |
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
SECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
No spout: BIOSAFE hygienic outlet integrated into the body.
Anti-scalding safety: HW flow rate is reduced if CW supply fails.
Securitouch thermal insulation prevents burns.
Ø 35mm ceramic cartridge with pressure balancing.
Pre-set maximum temperature limiter.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Body with smooth interior and very low water volume (reduces bacterial development).
Flow rate limited to 4 lpm at 3 bar.
Solid control lever.
Mixer without pop-up waste.
Reinforced fixing via two stainless steel rods.
Supplied with copper tails and Ø 15mm stopcocks.
TECHNICAL FEATURES
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
Connector | M1/2" |
---|---|
Technology | SECURITHERM EP BIOSAFE |
Height | 180mm |
Length | 220mm |
Drop height | 95mm |
Spout length | 110mm |
Flow rate | 4 lpm |
Temperature limiter | 41°C |
Finish | Chrome-plated brass |