Категории
jpg_160770_1.jpg Zoom

Delabie писсуар DELTA TC антивандальный Н/Р сталь AISI304

Бренд:
Единица: шт
Время доставки: 4-6 недель
Цена:
1096,69 €
Kuumakse alates: 93,22 €
Кол-во: - +
   - или -   

DELTA TC wall-hung urinal 
Ref. 160770

Wall-hung individual rimless urinal, cross wall installation for service ducts. 
Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.2mm. 
Rear (recessed) inlet. 
Vandal-resistant: recessed waste outlet, concealed trap. 
200mm threaded rod can be cut to size (other lengths available on request).
Supplied with fixing elements. 
CE marked. Complies with European standard EN 13407 for 2L flush. 
Weight: 8kg.

TECHNICAL FEATURES 

DELTA TC wall-hung urinal 
Ref. 160770

Height 585mm
Length 385mm
Width 350mm
Thickness 1.2mm
Finish Polished satin 304 stainless steel

Файлы

Схожие продукты

Коллективный писуар 1200 mm нержавеющая сталь

Артикул: PO-URM-1200 ,   Время доставки: 3-4 недели ,   Viimistlus:
1367,05 €
Антивандалльная душевая пьезо кнопка Н/Р сталь, для смешанной воды,  без адаптора
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Артикул: AZP-AUS 11 ,   Время доставки: 3-4 недели ,   Viimistlus:
381,15 €

Керамический писсуар Roca Zoom с радаром Sanela,  с интегрированным источником питания 230V/ AC

SLP 35RZ

 

Urinal Roca Zoom with a radar flushing unit and integrated power supply, 230 V AC

 

Characteristics

  • economy flushing by 1 liter of water
  • easy installation by the help of paper drill template
  • whole flushing unit is placed behind the urinal
  • system reacts only on the direct use of the urinal (it analyses changes, which are proceeded inside of the urinal, when a liquid is flowing through)
  • adjustable flushing time 0,5 - 15,5 s
  • parameters adjustment by remote control SLD 04 without the necessity to dismantle the urinal from the wall (acoustic setting indication)
  • automatic flushing after each 6 hours non-use
  • possibility to regulate a water flow by the ball valve
  • radar flushing unit recharges a water to the siphon after each flushing
Code SLP 35RZ 
Order number 01355 
 

Supply specification

SLP 35RZ - Supply No. 01355 - ceramic urinal with the radar flushing unit on the mounting rail, electromagnetic valve, connecting hoses, angle valve with filter and check valve, inlet fitting with a rubber sealing, siphon, paper drill template, power supply

Technical information

Operating voltage: 230 V AC/50 Hz
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 1/2“
Water outlet: inlet fitting with a rubber sealing
Артикул: SA-SLP35RZ ,   Время доставки: 14-21 день ,   Viimistlus:
992,00 €

> Working pressure : 1 to 5 bar

> Volume of water delivered : Adjustable from 6 to 9 litres with stop valve Anti-water-hammering design

> Flow time : From 7 to 9 seconds

> Hydraulic supply : MM G 1"1/4 In line Outlet connection on flush pipe Ø 32 mm

> Material and colour finish : Body and cross-partition control in Brass Push Button in Brass, chrome finish

> Security : Anti-siphonic device

> Delivered with : 1 Ball valve integrated 1 cross partition control 15 to 200m 1 fitting out, 1 bent tube and 1 junction nozzle

> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Molded chrome-plated body in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227

Артикул: P13060 ,   Время доставки: 6-7 недель ,   Viimistlus:
440,10 €

BOB HD washbasin 
Ref. 164130

Wall-mounted hand washbasin. 
Basin internal diameter: 310mm. 
Clean and simple design. 
Bacteriostatic 304 stainless steel. 
Stainless steel thickness: 1.2mm. 
Rounded edges prevent injury. 
Vandal-resistant: shrouded basin, concealed trap, reinforced mounting frame. 
Quick and easy to install from the front thanks to a stainless steel mounting frame. 
Supplied with 11/2" waste and trap. 
Without overflow. 
Supplied with fixing elements. 
CE marked. Complies with European standard EN 14688. 

 

TECHNICAL FEATURES 

BOB HD washbasin 
Ref. 164130

Height 285mm
Length 400mm
Width 360mm
Thickness 1.2mm
Finish Polished satin 304 stainless steel
Артикул: DE-164130 ,   Время доставки: 14-21 день ,   Viimistlus:
812,10 €

PEGU.ee — каждый смеситель и аксессуар для ванной отобран на основе личного опыта.Вас консультирует сантехнический эксперт Александр Гуменюк, опыт 25+ лет. info@pegu.ee · +372 515 0681