Категории
Uudised
Delabie valamu REDO valamu  D375mm roostevaba teras satiin 120710 Zoom

Delabie раковина REDO D375mm нержавеющая сталь сатин

Артикул: DE-120710
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена:
528,52 €
Kuumakse alates: 44,92 €
Кол-во: - +

REDO wall-mounted washbasin
Ref. 120710

Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.

Файлы

Схожие продукты

Коллективный писуар 1200 mm нержавеющая сталь

Артикул: PO-URM-1200 ,   Время доставки: 3-4 недели ,   Viimistlus:
1367,05 €

automatic washing system for wellingtons with jets - 12V, 50Hz

 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Артикул: AZP-RMP 02 ,   Время доставки: 3-5 недель ,   Viimistlus:
10492,23 €

HEMI inset round washbasin Ø 310mm - Ref. 120471

Round basin for recessed installation from above or below.

Basin internal diameter: 310mm.

Cut-out diameter: 330mm for installation from above, 310mm for installation from below.

Bacteriostatic 304 stainless steel.

304 stainless steel, bright polished

Stainless steel thickness: 1mm. One-piece, seam-free pressed bowl.

Rounded edges prevent injury. Supplied with 1¼" waste. Without overflow.

CE marked.

Complies with European standard EN 14688. Weight: 1.5kg.

 

Артикул: DE-120471 ,   Время доставки: 14-21 день ,   Viimistlus:
276,46 €

CANAL wall-mounted wash trough 
Ref. 120300

Wall-mounted wash trough for 4 posts - 2,400mm 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets. 
Easy to install: no joint concealers to install, light wash trough. 
Drainage on the right. 
With no tap hole. 
Supplied with 1 ½" waste. 
Without overflow. 
Supplied with brackets and fixing elements. 
CE marked. Complies with European standard EN 14296. 
Weight: 20kg. 
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007). 

 

Height 250mm
Length 2400mm
Width 400mm
Thickness 1mm (basin) et 1.5mm (edge and fixing brackets)
Finish 304 polished satin stainless steel
Артикул: DE-120300 ,   Время доставки: 14-21 день ,   Viimistlus:
1259,31 €

Питьевой фонтан настенный механический  для бассейнов Н/Р сталь AISI316 (бассейны)

AFO 01 stainless steel wall-mounted drinking fountain

AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

  • stainless steel sink with casing
  • press valve
  • corner valve with filter
  • flexible hose siphon
  • fixing bar
  • connecting hoses
  • anchoring material
Water inlet G 1/2"
Water pressure 0,2 – 0,6 MPa (recommended 0,3 MPa)
Outlet d = 40 mm
Inner dimension of the fountain d = 245 mm
Weight 4 kg

 

Артикул: AZP-AF001.CL ,   Время доставки: 3-4 недели ,   Viimistlus:
1092,62 €

PEGU.ee — каждый смеситель и аксессуар для ванной отобран на основе личного опыта.Вас консультирует сантехнический эксперт Александр Гуменюк, опыт 25+ лет. info@pegu.ee · +372 515 0681