Категории

Кран для писсуара presto P12 комплект, подсоединение 1/2"

Артикул: P31813
Бренд:
Единица: комплект
Время доставки: 14-21 день
Цена:
141,32 €
Kuumakse alates: 12,13 €
Кол-во: - +

Кран для писсуара presto P12 комплект, подсоединение 1/2"

Pissuaari kraan presto P12 komplektne, ühendus 1/2"

> Working pressure:

1 to 5 bar

> Flow:

9 l/min at 3 bar - 4 positions flow adjustment device Anti-water-hammering design

> Flow time:

6 seconds (± 2 sec.)

> Hydraulic supply:

In-line water inlet
Arrivée et sortie M G 1/2" (15x21)

> Application:

Complete kit Complete kit Complete kit Complete kit Complete kit Complete kit Complete kit Complete kit Complete kit Complete kit Complete kit Complete kit

ready to install for ALLIA urinal reference Satolas
ready to install for DURAVIT urinal reference Ben / Katja / Pago // Jim / Starck 3 ready to install for IDEAL STANDARD urinal reference Esprit / San/ Remo ready to install for JACOB DELAFON urinal reference Kerax
ready to install for LAUFEN urinal reference Caprino / Como
ready to install for PORCHER urinal reference 2691
ready to install for ROCA urinal reference Mural / Urito
ready to install for SELLES urinal reference Euroline 8645 / 8620/ / Mistral ready to install for SPHINX urinal reference Eurobase 75 / 85 // Europa 85 ready to install for VILLEROY & BOCH urinal reference Targa/ pro
ready to install for VILLEROY & BOCH urinal reference Architect
ready to install for VITRA urinal reference Architek

> Delivered with:

1 PRESTO 12, urinal valve compatible NF 1 Equipped pipe 1/2" with water effect
1 Flat gasket
1 Nut

1 Loose wall flange Instruction manual

> Standards & approvals:

Brass body in accordance with EN 1982, EN 12164, EN 12165
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227

Схожие продукты

Vajutava nupuga segisti 

P 400 S BC

Presto

kroom

15 sek. töötsükkel 3 bar

3-6 l/min

Артикул: P28610 ,   Время доставки: 7 дней
445,00 €
Артикул: P30302 ,   Время доставки: 7 дней
122,00 €

> Working pressure: 1 to 5 bar

> Flow: 1.9 l/min with flow regulator Anti water-hammer system

> Flow time: 7 seconds - lever upwards 11 seconds - lever downwards

> Hydraulic supply: G 1/2'' x 40

> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme

> Safety: With S® antiblocking system to prevent blocking in continuous flow

> Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer

> Delivered with: 1 Filter gasket 1 base gasket 1 fixture nut + 1 stainless steel washer 1 Nut for 12x14 tube 1 rubber flat gasket 1 coloured sticker

> Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227

Артикул: P64704 ,   Время доставки: 7-14 дней
195,20 €

> Working pressure : 1 to 5 bar 


> Flow : 6 l/min with integrated flow limiter Anti-water-hammering device Fixed shower head with anti-limescale spikes 
 
> Flow time : 30 seconds (± 5 sec.)
 
> Hydraulic supply : G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 On P 50 tap NF II and thermostatic mixer tap EN 1111 (NF check valves)
 
 > Material : Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 High resistance RAL 7005 coloured ABS covers 
 
> Functioning: Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
 
> Thermal resistance : Resistant to a temperature of 75°C for 30-minute-thermal-shocks 
 
> Security : Anti-scald system: flow is immediately stopped if the cold water is cut off Maximum delivered temperature : pre-fixed at 38° 
 
> Delivered with : 1/2" hoses with revolving nuts MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screw and instruction manual 
 
> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in concordance with ISO 9227 
Артикул: P88800 ,   Время доставки: 14-21 день
1177,30 €

Радарное устройство смыва для писсуара Nova, Renova, Nova Top, 24 V DC

SLP 07S

 

Radar flushing unit on the mounting rail, 24 V DC

 

Characteristics

  • radar flushing unit for urinals NOVA PRO FELIX 26 000; RENOVA Nr. 1 235 300; NOVA PRO ALEX 66 000; NOVA PRO M36 000; RENOVA Nr. 1 PLAN 235 100 (Kolo)
  • economy flushing by 1 liter of water
  • easy installation by the help of paper drill template
  • whole flushing unit is placed behind the urinal
  • system reacts only on the direct use of the urinal (it analyses changes, which are proceeded inside of the urinal, when a liquid is flowing through)
  • adjustable flushing time 0,5 - 15,5 s
  • parameters adjustment by remote control SLD 04 without the necessity to dismantle the urinal from the wall (acoustic setting indication)
  • automatic flushing after each 6 hours non-use
  • possibility to regulate a water flow by the angle valve
  • radar flushing unit recharges a water to the siphon after each flushing
Order number 11071
Code SLP 07S
 

Supply specification

SLP 07S - Supply No. 11071 - radar flushing unit on the mounting rail, electromagnetic valve, connecting hoses, angle valve with filter and check valve, inlet fitting with a rubber sealling, siphon, paper drill template

Technical information

Operating voltage: 24 V DC
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 1/2“
Water outlet: inlet fitting with a rubber sealing
Артикул: SA-SLP07S ,   Время доставки: 14-21 день
628,00 €