Настенное сидение в душевую Mediclincs нержавеющая сталь AISI304
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee
Единица: шт
Время доставки: 14-21 день
Продавец: PEGU OÜ
• Reversible solid phenolic folding shower seat, waterproof, black edged, frame manufactured in stainless steel AISI 304, satin finish and with a wall bracket to assure the maximum safety for the end-user.
• Suitable to install inside the shower.
• Designed to withstand a maximum load of 113 kg, provided it is properly mounted to the wall.
• Structural assembly shall be of welded construction and all exposed edges and corners shall be radiused and/or deburred.
• Model shall comply with accessible design guidelines (including ADAAG in the U.S.A.).
• “L-shaped” seat, made of solid phenolic ivory-colored with black edges, waterproof, shatterproof and easy to maintain. Reversible for left –or right- hand installation in the field. Secured to the frame with stainless steel carriage bolts and acorn nuts.
• AISI 304 stainless steel frame, satin finish.
• Non-slip and warm to the touch.
• Slots for water drainage.
• Opening and closing system made of AISI 304 stainless steel, satin finish.
Moeks disain,keskmise hinnaklass,suurepärane tasakaal ja valikus.
-Optimaalne jõudluse ja energiakulu suhe
-Sensoriga toimiv
-Hooldusvaba
-Ülikaine (ainult 57dB) ja ergonoomiline
-Reguleeritav tuvastuskaugus (5-25cm)
-Ideaalne tulemuse ja hinna tasakaal
Kuivatuseaeg on 30-40 sek
Seebidosaator
valge epoksükate,
R/V teras AISI 304
1,5L
Vandaalikindel lukuga korpus
*Н/Р сталь 0,4 mm, матовый
*AISI304
*С креплением на стену
*R/V teras 0,4 mm, harjatud
*AISI304
*Paigaldusplaat seinale kinnitamiseks
• Toilet brush holder made of AISI 304 stainless steel, satin finish.
• Suitable for wall mounting or floor standing.
• Suitable for the hotel sector, for fitting in bath hotel rooms.
• Model suitable for public use.
• Handle made of AISI 304 stainless steel, 0.4 mm thick, satin finish.
• Cover made of AISI 304 stainless steel, 0.4 mm thick, satin finish.
• Inner rod made of AISI 304 stainless steel, 0.8 mm thick, satin finish.
• Brush made of sisal fiber.
• Screws and plugs for installation to the wall are provided.
Käetugi 537mm sirge
teras valge epoksükate
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
Prügikast 6L, seinapealne paigaldus
teras valge
