Пеленальный столик, горизонтальный, Н/Р сталь, утопленый WP2010S
Бренд:
Единица: шт
Время доставки: 4 недели
✅ Не проспи осень с PEGU.EE!
Используйте промокод NOVEMBER2026 в корзине и получите скидку!Предложение действительно до 30.11.2026.
Добавьте товар в корзину и выберите удобную доставку. Покупка без регистрации!⚡
ℹ️ Цена включает налог с оборота (KM).
▼ Читать далее: ...
✅ Популярные товары в наличии на складе в Таллине — доставка 1–3 дня или самовывоз.
✅ Если товар под заказ, уточните детали — часто мы можем предложить доставку быстрее ожидаемого: info@pegu.ee
✅ На все товары действует гарантия 2 года и право на возврат 14 дней.
✅ Автоматическая отправка счета на e-mail. Для e-arve добавьте пометку в комментариях.
ℹ️ Цена включает налог с оборота (KM).
PEGU OÜ — Usaldusväärne ettevõte 2025 
Пеленальный столик, горизонтальный, Н/Р сталь, утопленый Wagner Ewar WP2010S
WP2010S
Nappy changer WP2010
- Nappy changer in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed, handle strip with glossy surface.
Further available surfaces: see below. - Easy to open and close with maintenance free lifting mechanism supported by gas struts.
- Table surface in grey polypropylene, molded, without any visible fixtures.
- Intended for use with paper overlays.
- TÜV-tested and certified according to
EN 12221-1:2013
EN 12221-2:2013
AfPS GS 2019:01 PAK - Test load 150 kg. Approved for private use:
Load capacity up to 11 kg / age up to 1 year. - Wear parts can be replaced as modules.
- Installation dimensions: 902 x 568 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 25.1
Декоративная рама, для столика WP2010 900x566mm 768661
161,00 €
Süvistatav prügikast
süvistussügavus 150mm
Diameeter 380mm
Mahtuvus 2,5l/20-30 lehte
Koti mõõt 39x28CM
Nähtav osa :
Rõngas :poleeritud kroom, naturaalne messing.
harjatud kroom, harjatud R/V teras või 14 rinevat
värvitooni.
Mahuti materjal :värvitud PC/ABS
RS1/B Must Mahuti
Süvistatav paberidosator
süvistussügavus 150mm
Diameeter 286mm
Mahtuvus 80-100 lehte 85mmx205mm
Koti mõõt 39x28CM
Nähtav osa :
Rõngas :poleeritud kroom, naturaalne messing.
harjatud kroom, harjatud R/V teras või 14 rinevat
värvitooni.
Mahuti materjal :värvitud PC/ABS
Держатель для туалетной бумаги утопленный Wagner Ewar 2 рулона Н/Р сталь сатин WP167
TOILET ROLL HOLDER FOR FLUSH-MOUNTING WP 167
148 x 348 x 150 mm
with concealed reserve roll
- Toilet roll holder with one concealed reserve roll in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded. Visible surfaces satin finished and brushed.
Further available surfaces: see below. - Designed for two standard toilet rolls, including one concealed reserve roll, which drops down automatically with dimensions:
Outer diameter max. 125 mm
Width max. 100 mm
Core diameter min. 38 mm - Inspection slot to indicate fill level.
- Accessible for refilling through lockable front flap.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Installation dimensions: 150 x 350 x 140 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 3,2
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 728500 |
| highly polished | 732500 |
| (coloured) plastic powder - coating | 729500 |
Toilet roll holder with one concealed reserve roll in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Designed for two standard toilet rolls, including one concealed reserve roll, which drops down automatically. Inspection slot to indicate fill level. Accessible for refilling through lockable front flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 148 x 348 x 150 mm
Article No. WP167
505,00 €
Пеленальный настенный столик Mediclinics вертикальный пластик CP0016V
• Vertical surface-mounted baby changing station made of bacterial-resistant polypropylene.
• BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability.
• Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly.
• Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes.
• BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon.
• A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand.
• BabyMedi® units fully comply with the EN 12221-1 and EN 12221-2 standards that require baby changing stations be able to support a 50 Kg static load test during one hour.
488,00 €
Walking aid holder, 100 x 150 mm
100 x 150mm, made of Aluminium, with a scratch-resistant powder coating with antibacterial protection. Available in the Cavere® colour range. For depositing walking aids, for wall-mounting, easy fixing. Concealed screw fixing.
Supplied with stainless steel Torx screws 5mm x 60mm dia. and plugs for solid masonry.
|
Product code 7500410 |
|
Product group 7010 |
Cavere white (092)
Satin beige (093)
Silber Metallic (096)
Anthrazit Metallic (095)
Carbon black (091)
116,00 €
