Раковина HEMI d310mm AISI304 матовая Нержавеющая сталь
HEMI inset round washbasin Ø 310mm - Ref. 120470
Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm. One-piece, seam-free pressed bowl.
Rounded edges prevent injury. Supplied with 1¼" waste. Without overflow.
Complies with European standard EN 14688. Weight: 1.5kg.
[Formerly ref: 0213470201]
Valamu R/V terasest
Stainless steel floor standing bulk sink, 700x700x850 mm
- stainless steel bulk sink with supporting legs with a sheating
- without a tap hole (could be made to order)
- possibility of fine plane regulation by the regulation screws on the supporting legs
- available also in dimensions 600 x 600 x 850 mm
- material CrNi 18/10 (AISI-304)
- brushed finish
- different dimensions could be made to order
AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.
The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.
It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.
|Size (mm):||525 x 334 x 97|
|Large bowl (mm):||500 x 310 x 83|
Icon Hand Wash Basin IC1-32 in stainless steel 18/10, is designed for under mounting.The hand wash basin is pressed in one piece and has laser-cut integrated outlet holes that are concealed by a removable outlet cover.The basin is supplied with waste under part and overflow equipment.
AFO 01.Yst. steel sensor controlled drinking fountain
AFO 01.Y is st. stainless wall hung drinking fountain controlled by sensor. Water runs after disrupting the scanning zone.
Fountain is made by welding all components together.
Fountain is suppplied with safety power 12 V, 50 Hz from power supply ZAC (AFO 01.Y) or with 4x AA battery (AFO 01.YB).
Material is standardly st. steel AISI 304 or can be AISI 316 (AFO 01.Y.CL or AFO 01.YB.CL).
St. steel driking fountain AFO 01.Y is based on favourite model AFO 01 with manual control.
The sensor, located on the right side of the fountain, is reacting on the approach of the user. Water starts to run from the nozzle, located in the middle of the fountain bowl, and runs over the time when the user´s head is in the scanning zone (max. 30 sec.) + preset time (max. 4 sec.) to clean the nozzle.
- st. steel drinking fountain
- sensor and electronic
- electromagnetic valve
- connecting flexible hose
- corner valve with filters
- mounting material
|water inlet||G 1/2"|
|water pressure||1 - 10 Bar (AFO 01.Y; AFO 01.Y.CL)|
|2 - 8 Bar (AFO 01.YB; AFO 01.YB.CL)|
|outlet||d = 40 mm|
|bowl inner dimension||d = 245 mm|
|suppply||12 V, 50 Hz (AFO 01.Y; AFO 01.Y.CL)|
|6 V - 4 x AA battery (AFO 01.YB; AFO 01.YB.CL)|
|power supply||ZAC 1/20 (max. 3 x AFO 01.Y ; AFO 01.Y.CL)|