Категории

Унитаз с бачком Н/Р сталь, двухсистемный + сидение махагон

Артикул: PINP-655-OVC-TB-P+PWC Mahagon
Бренд:
Единица: шт
Время доставки: 8 недель
Цена:
1575,60 €
Кол-во: - +
   - или -   
Схожие продукты

Overall dimension in mm Ø174 x 235 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 2.50

Артикул: EL220-1080020 ,   Время доставки: 3-4 недель
375,00 €
 
 

AUZ 08

stainless-steel standing closet, with hardened seat, back drain

   
 
 
 

AUZ 08 is a stainless-steel WC in matt design. To increase the user comfort, it is provided with a grey seat with a lid made of hardened plastic (newly also with a seat in black design AUZ 08.CS). AUZ 08 is designed to stand on the floor at the wall; it is suitable for places where the common closet cannot be attached to the wall, because of a thin bearing particle, for example. The standard version of AUZ 08 has a back drain (the version with the bottom drain AUZ 02). It is suitable to supplement the WC with the automatic pressure water flushing device AUZ 3, automatic flushing device with the piezo button AUZ 3.P (or the vandal-resistant flushing device BSAZ 01) or any flushing device with a cistern.

 

Thanks to its resistance to damage, the closet is primarily intended for social facilities with demanding operation, such as highway lay-byes, alehouses, etc., where easy maintenance of sanitary conditions is required. WC is also manufactured in the design for the disabled under the designation AUZ 08 INV

 

Further closet versions can be found in the section Stainless-steel closets or Stainless-steel safety closets.

 

 
Basic technical information
Water inlet: d= 34-50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 23 kg
 
 
Requirements for setting up the construction
  1. Set-up outlet d = 110 mm including rubber sleeve for pipe d = 90 mm.
  2. Set-up water inlet d= 34-50 mm according to chosen sealing.
 
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
 
 
Made to order
  • AUZ 3 - automatic pressure flushing system
  • AUZ 3.P - automatic pressure flushing system with piezo control
  • BSAZ 01 - vandal resistant pressure flushing system
 
Артикул: AZP-AUZ 08 ,   Время доставки: 3-4 недели
1173,60 € (10%)
1304,00 €

automatic washing system for wellingtons with jets - 12V, 50Hz

 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Артикул: AZP-RMP 02 ,   Время доставки: 3-5 недель
5755,00 €

HEMI inset round washbasin Ø 310mm - Ref. 120471

Round basin for recessed installation from above or below.

Basin internal diameter: 310mm.

Cut-out diameter: 330mm for installation from above, 310mm for installation from below.

Bacteriostatic 304 stainless steel.

304 stainless steel, bright polished

Stainless steel thickness: 1mm. One-piece, seam-free pressed bowl.

Rounded edges prevent injury. Supplied with 1¼" waste. Without overflow.

CE marked.

Complies with European standard EN 14688. Weight: 1.5kg.

 

Артикул: DE-120471 ,   Время доставки: 14-21 день
156,00 €