Рукосушилки Mediclinics – быстрые и надёжные решения для общественных помещений

Сушилки для рук Mediclinics – профессиональные решения для интенсивного использования
Mediclinics — один из самых популярных брендов сушилок для рук в Эстонии. Эти устройства устанавливаются в Ülemiste, Kristiine, Lõunakeskus, Olerex, Circle-K, аэропорту Таллинна и многих других общественных местах.
Преимущества:
-
Мгновенная сушка рук за несколько секунд
-
Автоматическое включение благодаря сенсору
-
Энергоэффективные и бесконтактные
-
Прочные и вандалостойкие
Материалы и отделка:
-
Нержавеющая сталь AISI 304 – матовая и полированная
-
Окрашенный металл – чёрный или белый
-
Пластик – лёгкие и бюджетные модели
Идеально подходят для:
-
Торговых центров
-
Заправок
-
Аэропортов и вокзалов
-
Спортивных объектов и школ
-
Общественных учреждений
PEGU.ee – официальный поставщик сушилок для рук Mediclinics в Эстонии.
❓ Не уверены, какой товар подходит именно вам?
PEGU.ee поможет с выбором — обращайтесь к нашему эксперту с 25+ летним опытом в сантехнике и дизайне.
Написать намWASH AND DRY UNITS
Mediclinics wash and dry units are soap, water and air all-in-one to avoid water splashing on the floor, to save space and to spend less time inside the washroom.
Engineered with aesthetics and performance in mind, our wash and dry units are pure elegance and efficiency. Its smart design, with clean lines and elegant curves and its great functionality, breaks all Current design and functional conventions.
• Mediclinics® All-in-one is a countertop mounted hand dryer tap and a water and soap dispenser faucet, all ready to work together as one beautiful, touch-free, hygienic and highly efficient system.
• Mediclinics® All-in-one has been thought and designed to avoid water splashing on the floor, to save space and to spend less time inside the washroom.
• Engineered with aesthetics and performance in mind, Mediclinics® All-in-one solutions are pure elegance and efficiency. Its smart design, with clean lines and elegant curves and its great functionality, breaks all current design and functional conventions.
• Mediclinics® All-in-one solutions are eco-friendly, saving more than 73% in terms of economical savings vs. similar solutions on the market.
• Mediclinics® All-in-one solutions are also very hygienic because they can incorporate an HEPA media filter (optional), the “Ion Hygienic” technology (optional) and an air-freshener tablet (optional).
MEDICLINICS ALL-IN-ONE WALL MOUNTED
• Wash and dry unit Mediclinics® All-in-one, consisting of a hand dryer + a water tap + a soap dispenser, all sensor operated and ready to be wall mounted.
• Ready to work together as a complete set, or component by component, Mediclinics® All-in-one has been thought and designed to avoid water splashing on the floor, to save space and to spend less time inside the washroom.
• Mediclinics® All-in-one wall mounted is ideal for new construction projects of public restrooms which have a maintenance room behind the wall or for stud walls. In both cases, all components of this wash and dry unit are just behind the wall with only the taps affixed to the wall and at sight, creating a new clutter-free washroom experience.
• Mediclinics® All-in-one solutions are eco-friendly, saving more than 73% in terms of economical savings vs. similar solutions on the market.
• Mediclinics® All-in-one solutions are also very hygienic because they incorporate an HEPA media filter, the “Ion Hygienic” technology (optional) and an air-freshener tablet (optional).
Sensor operated hand dryer + electronic tap ware + electronic soap dispenser, made of chrome-plated brass, bright finish and designed to be wall mounted.
SENSOR OPERATED HAND DRYER (M092A): based on one of our most successful hand dryers, the Machflow Plus M09A, this countertop mounted hand dryer is capable of drying hands in just 10 seconds thanks to a pleasant jet of air that can reach speeds of 400 Km/h. The tap is made of chrome-plated brass, with a bright finish.
SENSOR OPERATED HAND DRYER (M093A): based on one of our most successful hand dryers, the Machflow Plus M09A, this wall-mounted hand dryer is capable of drying hands in just 10 seconds thanks to a pleasant jet of air that can reach speeds of 400 Km/h. The tap is made of stainless steel AISI 304, with a bright finish.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
Alumiiniumist korpus
Termoplastistist alus
Termokaitselülitiga F-klass induktsiooni
IP23
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 11A
Kaal 4 kg
Koguvõimsus 1640W
Eeldav kuivatusaeg 38 sek
263,25 €
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga F-klass induktsiooni
45 sek tsükkel
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 7A
Kaal 3 kg
Koguvõimsus 1640W
Eeldav kuivatusaeg 38 sek
Elektriisolatsioon klass II
Voolutarve 12A
Kuivatuseag 29 sek
Koguvõimsus 2750W
Kaitseklass IP23
Müratase 65dB (2 m kaugusel)
Elektriisolatsioon klass II
Voolutarve 12A
Kuivatuseag 29 sek
Koguvõimsus 2750W
Kaitseklass IP23
Müratase 65dB (2 m kaugusel)
Elektriisolatsioon klass II
Voolutarve 12A
Kuivatuseag 29 sek
Koguvõimsus 2750W
Kaitseklass IP23
Müratase 65dB (2 m kaugusel)
Keevisõmbluseta korpus on aluste kinnitatud kahe vandaalikindla poldiga ja lukustatud spetsiaalse Saniflow võtmega
3mm paksune alumiinium alus
Tulekindlast plastist ventilaatorikamber
Termostaatlülitiga F-klassi universaalne harjadega mootor
Alumiiniumist tsentrifugaalne topeltsümmetriline õhuvõtuventilaatori tiivik
Elemendi on termokaitselüliti
Elektroisolatsioon klass 1
Kaitseklass IP23
Tööaeg on 29 sek
Keevisõmbluseta korpus on aluste kinnitatud kahe vandaalikindla poldiga ja lukustatud spetsiaalse Saniflow võtmega
3mm paksune alumiinium alus
Tulekindlast plastist ventilaatorikamber
Termostaatlülitiga F-klassi universaalne harjadega mootor
Alumiiniumist tsentrifugaalne topeltsümmetriline õhuvõtuventilaatori tiivik
Elemendi on termokaitselüliti
Elektroisolatsioon klass 1
Kaitseklass IP23
Tööaeg on 29 sek
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga B-klass harjadega mootor
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 4,8A
Kaal 1,2kg
Koguvõimsus 1110W
Eeldav kuivatusaeg 39 sek
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga B-klass harjadega mootor
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 4,8A
Kaal 1,2kg
Koguvõimsus 1110W
Eeldav kuivatusaeg 39 sek
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga B-klass harjadega mootor
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 4,8A
Kaal 1,2kg
Koguvõimsus 1110W
Eeldav kuivatusaeg 39 sek
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga B-klass harjadega mootor
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 4,8A
Kaal 1,2kg
Koguvõimsus 1110W
Eeldav kuivatusaeg 39 sek
Elektroisolatsioon klass 1
Kaal 3,8 kg
Voolutarve 1,3-4,8 A
Koguvõimsus 1010W-1150W
Kaitseklass IP23
Müratase 58-68dB(2m kaugusel)
Kuivatusaeg 10-15 sek.
Elektroisolatsioon klass 1
Kaal 3,8 kg
Voolutarve 1,3-4,8 A
Koguvõimsus 1010W-1150W
Kaitseklass IP23
Müratase 58-68dB(2m kaugusel)
Kuivatusaeg 10-15 sek.
Elektroisolatsioon klass 1
Kaal 3,8 kg
Voolutarve 1,3-4,8 A
Koguvõimsus 1010W-1150W
Kaitseklass IP23
Müratase 58-68dB(2m kaugusel)
Kuivatusaeg 10-15 sek.
Elektroisolatsioon klass 1
Kaal 3,8 kg
Voolutarve 1,3-4,8 A
Koguvõimsus 1010W-1150W
Kaitseklass IP23
Müratase 58-68dB(2m kaugusel)
Kuivatusaeg 10-15 sek.
Elektriisolatsioon klass II
Voolutarve 12A
Kuivatuseag 29 sek
Koguvõimsus 2750W
Kaitseklass IP23
Müratase 65dB (2 m kaugusel)