Soodus

Küsi tarneaega

Delabie Paneel seinale, valamule CANAL 2400mm, R/V teras 100300

Настенная панель, для раковины CANAL 2400mm, Н/Р сталь Delabie 100300

Артикул: DE-100300
Бренд:

Единица: шт
Время доставки: 14-21 день

✅ Не проспи осень с PEGU.EE!

Используйте промокод OKTOOBER2026 в корзине и получите скидку!
Предложение действительно до 31.10.2026.

Добавьте товар в корзину и выберите удобную доставку. Покупка без регистрации!⚡

ℹ️ Цена включает налог с оборота (KM).

▼ Читать далее: ...

✅ Популярные товары в наличии на складе в Таллине — доставка 1–3 дня или самовывоз.

✅ Если товар под заказ, уточните детали — часто мы можем предложить доставку быстрее ожидаемого: info@pegu.ee

✅ На все товары действует гарантия 2 года и право на возврат 14 дней.

✅ Автоматическая отправка счета на e-mail. Для e-arve добавьте пометку в комментариях.

ℹ️ Цена включает налог с оборота (KM).

PEGU OÜ — Usaldusväärne ettevõte 2025

kuumaks al. 39,86 €

Цена: 521,00 €

468,90 €

Kuumakse alates: 39,86 €

Настенная панель, для раковины CANAL 2400mm, Н/Р сталь Delabie 100300

Splashback 2400mm for CANAL wash trough
Ref. 100300

Splashback for CANAL wash trough.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Length: 2,400mm.

TECHNICAL FEATURES

Splashback 2400mm for CANAL wash trough
Ref. 100300

Height	300mm
Length	2400mm
Width	1.5mm
Thickness	1.2mm
Finish	304 polished satin stainless steel

Файлы

US_eng_100300.pdf

Совместимые продукты

Soodus

Küsi tarneaega

Delabie Раковина CANAL 2400mm, Н/Р сталь (4 места) 120300

CANAL wall-mounted wash trough
Ref. 120300

Wall-mounted wash trough for 4 posts - 2,400mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 20kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007).

Height	250mm
Length	2400mm
Width	400mm
Thickness	1mm (basin) et 1.5mm (edge and fixing brackets)
Finish	304 polished satin stainless steel

Артикул: DE-120300 , Время доставки: 14-21 день , Viimistlus:

1226,70 € (10%)
1363,00 €

Схожие продукты

Küsi tarneaega

Отделитель гипса GIPS-01, 9L, Н/Р сталь, AISI 304

Overall dimension in mm Ø300 x 382 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 7.70

Артикул: EL255-GIPS-01 , Время доставки: 3-4 недели , Viimistlus:

1309,00 €

Küsi tarneaega

Антивандальная раковина + дозатор для мыла + термостат + рукосушилка

AUM 026 INV is a stainless steel, partly wall-built in washbasin, containing the combination of a liquid soap dispenser, water tap and hand dryer in a small space. The washbasin is adjusted to be used also by wheelchair persons – it is shallow, completed with handles, the waste is hidden behind the wall. Controlled by durable piezo-pushbuttons, electronically controlled turn-off (the period of water running is settable by the owner). The washbasin is to be mounted through the wall, all technology components are behind the wall, and thus cannot be damaged by users (anti-vandal design).

A wall-hanged version may be supplied to order, or a version without any of the functions (e.g. onlz water plus soap, or water plus dryer). The washbasin is made of AISI 304 stainless steel. A recommended cleaning agent for stainless products maintenance: Würth – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).

Basic technical information
Power supply:	230 V, 50 Hz
IP protection:	IP 55
Dimensions (visible from outside):	800 x 800 x 363 mm
Required thickness of wall:	min. 100 mm
Outlet:	d = 40 mm

Requirements for setting up the construction
Opening in the wal 740 x 740 mm Prepared el. supply cable 3C x 1,5 s 230 V, 50 Hz Prepared water outlet according to technical scheme

Complete delivery
Stainless-steel washbasin with handles Electronic hand dryer Electronic soap dispenser Electronic water tap Through-wall frame with bolts Waste with a stink trap 230V / 12V source for the electronics

Артикул: AZP-AUM 026.TV INV , Время доставки: 3-4 недели , Viimistlus:

4370,49 €

Küsi tarneaega

Антивандалльная душевая пьезо кнопка Н/Р сталь, для смешанной воды, без адаптора

	AUS 11 Pressure button-controlled shower for heat regulated water

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage.

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth.

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet.

Electronics can work in two modes:

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time.

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting.

Basic technical information
Water input:	G 1/2“
Water pressure:	1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow:	10 s – 42,5 min in mode 1
	0 s - 42,5 min in mode 2
Power supply:	12 V, 50 Hz
Power requirement:	6 VA
Source of power supplz:	ZAC 1/20 (max. 3× AUS 11)
	ZAC 1/50 (max. 8× AUS 11)
Weight:	2,0 kg

Requirements for setting up the construction
Water installation set up as per picture Set-up alcove 150 x 75 mm for installation casket Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC

Complete delivery
installation casket input and output bolting electromagnetic valve spherical valve covering metal plate with piezo button electronics

Made to order
SP 1 – shower arm with water flow of 9 l/min SP 2 – shower arm with water flow of 7 l/min SP 3 – shower arm with water flow of 7 l/min ZAC - source of power supply 12V, 50Hz

Figure

A -	water inlet G 1/2"
C -	electricity supply cable 12 V, 50 Hz
G -	water outlet into shower armG 1/2"

Download information about the product
AUS 11 data for projectants - ( 84 kB )

Артикул: AZP-AUS-11 , Время доставки: 3-4 недели , Viimistlus:

381,15 €

Küsi tarneaega

Автоматическая мойка для сапог с дюзами, 12V, 50Hz

automatic washing system for wellingtons with jets - 12V, 50Hz

Radius of sensor	0 – 0,4 m
Water inlet	G 1/2“
Water pressure	0,3 – 1,0 MPa
Outlet	d = 32 mm
Inner dimensions of the trough	250 x 400 x 280 mm
Electricity protection	IP 55
Power supply	12 V, 50 Hz
Power requirement	10 VA
Source of power supply	ZAC 1/20 (max. 2 x AMO 01)
	ZAC 1/50 (max. 5 x AMO 01)
Weight	18 kg

Set up water inlet as per picture
Set up outlet d = 32 mm
Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC

Артикул: AZP-AMO 01 , Время доставки: 3-5 недель , Viimistlus:

2444,43 €

Küsi tarneaega

Питьевой фонтан настенный механический Н/Р сталь AISI304

AFO 01 stainless steel wall-mounted drinking fountain

AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

stainless steel sink with casing
press valve
corner valve with filter
flexible hose siphon
fixing bar
connecting hoses
anchoring material

Water inlet	G 1/2"
Water pressure	0,2 – 0,6 MPa (recommended 0,3 MPa)
Outlet	d = 40 mm
Inner dimension of the fountain	d = 245 mm
Weight	4 kg

Артикул: AZP-AFO01 , Время доставки: 3-4 недели , Viimistlus:

777,54 €

Настенная панель, для раковины CANAL 2400mm, Н/Р сталь Delabie 100300

Настенная панель, для раковины CANAL 2400mm, Н/Р сталь Delabie 100300

TECHNICAL FEATURES

Файлы

Delabie Раковина CANAL 2400mm, Н/Р сталь (4 места) 120300

Отделитель гипса GIPS-01, 9L, Н/Р сталь, AISI 304

Питьевой фонтан настенный механический Н/Р сталь AISI304

AFO 01 stainless steel wall-mounted drinking fountain

Package contents

информация

дополнительно

мой счет

Контакт