Delabie писсуар LP 1200mm антивандальный Н/Р сталь AISI304
Коды и спецификации доступны по запросу для проектов и точного подбора.
Мы рекомендуем делиться ссылкой на товар, а не только кодом — это исключает ошибки.
Обратитесь напрямую: info@pegu.ee

Единица: шт
Время доставки: 4-6 недель
✅ На PEGU.ee мы выбираем то, что действительно приятно иметь дома.
Умные решения, красивый дизайн, проверенное качество.
Покупая у нас, вы выбираете уверенность и спокойствие.
LP trough urinal
Ref. 130310
Floor-standing trough urinal.
Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.2mm
Rear water inlet. Central drainage.
Supplied with 2 stainless steel rinsers and 2 flexible hoses.
Water saving: optimal rinsing with 0.1 L/sec. per service i.e. 0.3L per use.
Waste outlet 1½". Supplied with waste and integrated trap (ref. 785000).
Easy to install and maintain thanks to access panels with theft prevention TORX security screws.
Weight: 24.2kg.
TECHNICAL FEATURES
LP trough urinal
Ref. 130310
Height | 1020mm |
---|---|
Length | 300mm |
Width | 1,200mm |
Thickness | 1.2mm |
Finish | Polished satin 304 stainless steel |
Файлы
- Wand-Urinal
- Breite: 31,5cm
- Tiefe: 31cm
- Höhe: 56,5 cm
- Gewicht 16 Kg
- Beschichtung: inkl. CERASLIDE® Beschichtung
Писсуар Domino с инфракрасным устройством смыва, 230 V/DC
SLP 17
Писсуар Domino с инфракрасным устройством смыва, 24 В пост.
Характеристики
- устройствo смыва реагирует на присутсвие человека перед писсуаром на расстоянии макс. 0,7 м от датчика на протяжении времени более чем 7,5 сек.
- смыв писсуара после ухода человека
- прoдoлжительнoсть смыва мoжнo настрoить 0,5 - 15,5 сек.
- настройка параметров при помощи пульта дистанционного управления SLD 03
- самодействующий смыв по истечении 24 часов от последнего смыва
Арт. № | 01170 |
Название | SLP 17 |
Спецификация поставки
Технические данные
Зoна чувствительнoсти: 0,6 - 0,75 м
Рабочее давление: 0,1 - 0,6 MПа
Расход воды: 18 л/мин. (инф. пар.)
Подача воды: наруж. резьба G 1/2“
Выход воды: смывная гoлoвка
Керамический писсуар HOME с крышкой Alessi LAUFEN с радаром Sanela, интегрированый источник питания 230V/AC
SLP 24RZ
Urinal Alessi with cover with a radar flushing unit and integrated power supply, 230 V AC
Characteristics
- easy installation
- whole flushing unit is placed behind the urinal
- system reacts only on the direct use of the urinal (it analyses changes, which are proceeded inside of the urinal, when a liquid is flowing through)
- adjustable flushing time 0,5 - 15,5 s
- parameters adjustment by remote control SLD 04 without the necessity to dismantle the urinal from the wall (acoustic setting indication)
- automatic flushing after each 6 hours non-use
- possibility to regulate a water flow by the angle valve
- radar flushing unit recharges a water to the siphon after each flushing
Order number | 01245 |
Code | SLP 24RZ |
Supply specification
Technical information
Operating voltage: 230 V AC/50 Hz
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 3/4“
Water outlet: inlet fitting with a rubber sealing
> Working pressure : 1 to 5 bar
> Flow : 6 l/min at 3 bar - 4-position flow adjustment device Anti-water-hammering design
> Flow time : 15 seconds (± 5 sec.)
> Hydraulic supply : In-line water inlet M G 1/2" Inlet and outlet Cold water
> Thermal resistance : Resistant to a temperature of 75°C for 30 minute thermal shock
> Security : Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with : 1 Cross-partition control (1 to 200 mm thick) 1 Short wall spout (Non-rotating fixing) 87 mm 1 Closing tap with S anti-blocking system 1 stop valve M 1/2" (15x21) / M 1/2" (15x21) with quick couplings (12x14 mm) Instruction manual
> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12156 Molded chrome-plated body in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 922
PMR XS TC wall-mounted washbasin
Ref. 160250
Wall-mounted washbasin, cross wall installation for service ducts.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths available on request.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standardEN 14688.
Weight: 4.5kg.
TECHNICAL FEATURES
PMR XS TC wall-mounted washbasin
Ref. 160250
Height | 130mm |
---|---|
Length | 390mm |
Width | 400mm |
Thickness | 1.2mm |
Finish | 304 polished satin stainless steel |