WC iste pottile Monobloco 700, antivandaalne
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
Wall hung utility sink in stainless steel. Supplied with fixing brackets.
TEMPOFIX 3 self-supporting frame system for WCs
Self-supporting frame system W. 350mm for wall-hung electronic WC:
Black powder-coated steel frame.
Fixes to load-bearing floors.
Frame height can be adjusted from 0 - 200mm (with 1m mark).
Ø 32mm flush tube with Ø 55mm connection washer.
ABS soil pipe with HDPE sleeve connectors, Ø 110mm outlet with waterproof seal, with 2 setting positions.
Complies with French standard NF D12-208.
Compatible with solid walls from 26 - 130mm.
Fitted with TEMPOMATIC F1" electronic direct flush valve:
Stainless steel wall plate 320 x 220mm.
Shock-resistant infrared presence detection sensor.
Voluntary activation flush when user's hand approaches the sensor or automatically when the user leaves.
Time flow ~7 seconds can be adjusted 3 - 12 seconds.
Integrated stopcock and flow rate adjuster.
Detection distance can be adjusted by the installer.
automatic washing system for soles with rotary brushes - 230V, 50Hz
RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
- body of the washing machine
- removable grid
- electronics with photocell
- rotary brush
- hand brush
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
|Radius of sensor||0,5 m|
|Water inlet||G 1/2“|
|Water pressure||0,1 – 1,0 MPa|
|Electricity protection||IP 55|
|Power supply||230 V, 50 Hz|
|Power requirement||370 W|
|Water temperature||max. 42°C|
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
GENOU wall-mounted hand washbasin
Wall-mounted, knee-operated hand washbasin.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm
Rounded edges prevent injury.
Supplied with swan neck spout and time flow
tap with 7 second time flow.
Supplied with 1 ¼" waste.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.